KRG Alpha 180

[FireInTheWire]

I bought a KRG Alpha 180 for my Savage LRP. I can't take how cramped the HS stock is anymore. I asked KRG if this was a plug and play setup. The response:

Hi Josh,

It should be a drop in fit as long as your action screw spacing is 4.4” or 4.275”

Thank you,


-KRG

Are all Savage's SA this spacing? Can anyone tell me if my LRP has this spacing? I'm out of town and can't measure. Anyone running this setup?

Thanks

 

[MDT_Josh]

All new Savage SA repeater actions should be the 4.400" (or 4.410") action screw spacing, with only some of the older models being the 4.275" gap. Most chassis and stock manufactures will have a work around to accommodate both I can't speak for the KRG, but we elongate the front action screw counterbore to fit both and include an oblong washer to fill the gap.

 

[FireInTheWire]

All new Savage SA repeater actions should be the 4.400" (or 4.410") action screw spacing, with only some of the older models being the 4.275" gap. Most chassis and stock manufactures will have a work around to accommodate both I can't speak for the KRG, but we elongate the front action screw counterbore to fit both and include an oblong washer to fill the gap.

Excellent! Thank you sir!