Ordered last Wednesday.. receved and shot last Friday. I have a 26inch proof 300wm barrel is on order. What was told 9 to 12 weeks.. dose that usually hold true ?
Yes, it can be removed with no issues. However, you will lose the ability to have a front sling mount, since the QD cups screw into the bipod block.If I am not using the bipod block on my AT for anything, is it possible to just take it out? Will it hurt structural integrity any?
Would love to trim some of the dead weight if possible.
Good news. I might just have to engineer some sort of way to bolt on a fixed loop, can’t abide by the non-rotation limited cups to begin with. I’m using a magpul QD paraclip, but having trouble making it stay put without rotating.Yes, it can be removed with no issues. However, you will lose the ability to have a front sling mount, since the QD cups screw into the bipod block.
That glass, rifle and carbon barrel! What's not to like6.5 Proof Research
Nice rifle! How do you like that Ase Utra BoreLock muzzle brake?View attachment 7190745
My Mark13 mod5 (ish). Took it to the range today. It was damp and pretty shitty but the rifle performed well.
I am trying out the Ase Utra muzzle brake on it.
I'd go for a complete bolt instead of #1 and #2.Any other parts to consider to ensure repair capability for AI AXMC 300 Win Mag?
1 .Accuracy International AX .300 Win. Bolt Body 20013
2. Accuracy International AX replacement firing pin/safety assembly LA 338 Black 6429
3. AI AXMC Barrel
4. AI AXMC Magazines
It is very loud, so I wear both earplugs and ear pros on top. This makes the blast bearable. It helps a lot with the recoil too, granted the rifle is heavy on its own but it's good to have something that takes it down a notch. I do prefer my suppressor though.Nice rifle! How do you like that Ase Utra BoreLock muzzle brake?
Nice rig! Don't you normally shoot an AT-MPA?Gear shot from the roof during the Guardian Long Range/GTI team match in South Carolina this past weekend.
View attachment 7191391
Nice rig! Don't you normally shoot an AT-MPA?
Gear shot from the roof during the Guardian Long Range/GTI team match in South Carolina this past weekend.
View attachment 7191391
It is a really good field tripod. Not as tall, or as stable when fully extended as some of the higher priced options, but it handles this AX very well. I have seldom shot from it standing, mostly prone, or sitting where it is extremely stable. It is light and very quick to deploy/stow. The only negative I have found so far is the max height. I’m 6’1” and have to bend slightly to spot (binos) with it fully extended (incl center column) and tall bino adapter. It would be perfect for an angled spotter. However, I prefer to get on the binos sitting when I can so I don’t let it bother me. I thought I’d get good experience with it in the Guardian match, but the way it was set up our tripods were extra weight. My brother used his PVA comp on two stages, but I did not deploy mine at all. We ditched them both on the second day and did not miss them.Really nice set up!
How do you like the tripod? Worth the money or should I spend a little more and get a different one?
I'd go for a complete bolt instead of #1 and #2.
Also, a set of replacement screws for the chassis/stock panels etc. would be nice and not break the bank.
Maybe some small parts as ejector/extractor and pins for the bolt body?
And do you want spares for the trigger? (Or get the Competition Trigger and use the original as a spare kit)
Where does one buy spare screws for AXMC? I might consider that. I've also got all the parts and would love to get some redundancy in case parts become really hard to come by down the road now that the AXSR is becoming the standard.
Mile High shooting Accessories
Thanks! After a quick scan on their website I didn't see anything regarding spare screws. I assume this might be something I'd have to call to ask for?
Jwood how do you like that Hog saddle tripod?Gear shot from the roof during the Guardian Long Range/GTI team match in South Carolina this past weekend.
View attachment 7191391
Well I love my @Robert Gradous Dasher barrel... I just finished fireforming 600 pieces of Lapua brass and I loaded up 31g and 32g of Varget over 107 SMKs and couldn't be happier. This is my first 6BR variant and it really is kind of an "easy button". These are five shot groups.
View attachment 7189572View attachment 7189573
Really impressive groups... did the Dasher feed without issue in the AIAX magazine? I was thinking about 6 Creed but the dasher has a strong following. Well done!
Jwood how do you like that Hog saddle tripod?
Thanks! After a quick scan on their website I didn't see anything regarding spare screws. I assume this might be something I'd have to call to ask for?
How is the repeatability when you change barrels? Can you unscrew the barrel, shoot a different barrel then put the original one back on and it is always the same poi or do you have to rezero each time ?
You might want to beef up that muzzle brake a little bit. It's looking a little inadequate ?
It’s a 6 Creed, thank you very much ?How else is the man supposed to tame the massive amounts of recoil the 6.5 Creedmoor produces?
It’s a 6 Creed, thank you very much ?
Lmao. I hear you guys. It's a temp brake until my jet4 gets here. My other brakes have their homes on other barrels so I stole my rocket scientist brake off my .300wm that doesnt have a scope on it. I had finally been able to take some time and shoot that chassis and new barrel so I threw that one on.
My new chassis increases felt recoil by 327%. Patent pending.
Lmao. I hear you guys. It's a temp brake until my jet4 gets here. My other brakes have their homes on other barrels so I stole my rocket scientist brake off my .300wm that doesnt have a scope on it. I had finally been able to take some time and shoot that chassis and new barrel so I threw that one on.
Are you talking like the hang guard screws or what? I don't understand which screws you cant find at a local hardware store or fastenal
It’s a regular M5 socket cap screw with a washer, nothing special.Honestly, the one screw I'd be most concerned about is the one that governs the barrel clamp. I tighten and loosen that one all the time when changing/removing barrels. I've actually never fully unscrewed it before so I'm not even sure what's inside!