QuickLoad Request - 6mm Creedmoor and BL-C(2)

[s11033]

I know it's not a good choice in powder for the 6 Creed, but it's the only one I've got on hand that's anywhere between Ramshot TAC and H1000... Can anyone give me an expected starting and max load with 105gr FMJBTs?

Thank you!

Steve

 

[straightshooter1]

I know it's not a good choice in powder for the 6 Creed, but it's the only one I've got on hand that's anywhere between Ramshot TAC and H1000... Can anyone give me an expected starting and max load with 105gr FMJBTs?

Thank you!

Steve

For anyone to do some QuickLoad calculations, more detailed info is needed . . . like: Case brand (to get a decent case volume input, if you don't already know it), what COAL you're loading them to, maximum freebore length if you want to load out to the lands, maximum temperature you might shoot in.

 

[s11033]

For anyone to do some QuickLoad calculations, more detailed info is needed . . . like: Case brand (to get a decent case volume input, if you don't already know it), what COAL you're loading them to, maximum freebore length if you want to load out to the lands, maximum temperature you might shoot in.

Hey,

Thank you for letting me know. I'm using Hornady 6.5 Creedmoor cases necked down to 6. I'm not sure about freebore. I seated my bullet to be pretty close to the lands, but I don't know how to get an actual measurements. I'm pretty new to precision rifle shooting and loading. I can get the COAL when I get home.

Steve