• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Accuracy International Picture Thread

They've got one less elite sand 300 Norma now.
IMG_20200522_162951222_HDR.jpg
 
I was thinking about getting one of those... I have a AXMC with a 20 Inch 300 WM to fit perfectly in it :)
 
  • Like
Reactions: MACHTECH
Finally got my wife to shoot a rifle for the 1st time in her life. Took her straight to the 511 yard target. She has been terrified of guns until now. Now shes got the bug and wants to shoot all my rifles.

 
Sweet baby Jesus...ASR magazines for short action cartridges got released today on EuroOptic

My LH AXMC is really an AXMC now

Gods be praised
Just in time to sell it at a loss and buy a LH AXSR hahaha
 
  • Like
Reactions: RS14
To all.........keep the photos coming gents.....looking great 🤩


Sweet baby Jesus...ASR magazines for short action cartridges got released today on EuroOptic

My LH AXMC is really an AXMC now

Gods be praised
Bring me up to speed please on a few things:

1. Do AXSR mags fit AXMC? (If so I'm assuming this deletes AXMC mag adapter?)

2. What's the status of any functional .223/5.56 conversion?

3. Has anyone played with .37XC or .41XC? (I may ask in ELR forum too in case they don't visit here much)
 
  • Like
Reactions: kocustoms
To all.........keep the photos coming gents.....looking great 🤩

Bring me up to speed please on a few things:

1. Do AXSR mags fit AXMC? (If so I'm assuming this deletes AXMC mag adapter?)

2. What's the status of any functional .223/5.56 conversion?

3. Has anyone played with .37XC or .41XC? (I may ask in ELR forum too in case they don't visit here much)

  1. Yes they fit the AXMC. AI never released a magazine adapter for left handed AXMCs. This was what lefties have been waiting for to allow us to shoot short action cartridges through the long action
  2. Don't know anything about a conversion for .223 from AI.
  3. I have discussed 37XC with a couple of people. I am still considering doing so. It is a great cartridge
 
To all.........keep the photos coming gents.....looking great 🤩



Bring me up to speed please on a few things:

1. Do AXSR mags fit AXMC? (If so I'm assuming this deletes AXMC mag adapter?)

2. What's the status of any functional .223/5.56 conversion?

3. Has anyone played with .37XC or .41XC? (I may ask in ELR forum too in case they don't visit here much)

They do not offer a 223 conversion for The AXMC. Or at least not yet
 
Recently purchased an AI and was able to take it out for the second time today. I have two questions.

1. (See first picture) What is this black grease/oily residue? It looks like it’s coming from the bolt? I wiped it a little bit so that’s why it looks smeared.

2. The bipod stud adaptor came loose. I tried to tighten it up with the supplied 4mm hex key in the buttstock but it seemed just barely oversized? It barely fit in the top portion, but didn’t seat all the way and I felt like I was stripping it. I tested the 4mm key on the other screws on the pic rail and qd rail adaptors and it went in securely. Is it a different size? Should I use loctite to prevent this from happening again? Any specific torque spec? After tightening as best I could I was able to shoot my first 5 round group with it. (Second pic)

Thanks for the help!
 

Attachments

  • 81F3874B-59B1-444A-8EB7-F33271A016A2.jpeg
    81F3874B-59B1-444A-8EB7-F33271A016A2.jpeg
    204.1 KB · Views: 128
  • 34882713-F11D-46D7-9353-F61DF96BC2A9.jpeg
    34882713-F11D-46D7-9353-F61DF96BC2A9.jpeg
    386 KB · Views: 115
Last edited:
Recently purchased an AI and was able to take it out for the second time today. I have two questions.

1. (See first picture) What is this black grease/oily residue? It looks like it’s coming from the bolt? I wiped it a little bit so that’s why it looks smeared.

2. The bipod stud adaptor came loose. I tried to tighten it up with the supplied 4mm hex key in the buttstock but it seemed just barely oversized? It barely fit in the top portion, but didn’t seat all the way and I felt like I was stripping it. I tested the 4mm key on the other screws on the pic rail and qd rail adaptors and it went in securely. Is it a different size? Should I use loctite to prevent this from happening again? Any specific torque spec? After tightening as best I could I was able to shoot my first 5 round group with it. (Second pic)

Thanks for the help!
Don't use loctite on the accessory screws. First I'd remove one of the other pic rails, and steal the screws from it and swap them on your bipod adapter. Chances are it's simply an out of spec screw. If that doesn't fix it give AINA a call (or wherever you bought it from).
 
  • Like
Reactions: richthe1
1A0E9E3D-FBFB-4184-802F-ED7F7D62F6AB.jpeg


Mounted a new ZCO527 on Spuhr QDP-6002 and recently added the RRS plate. I’m feeling like my AXMC is finally “done” for the time being except for minor tweaks here and there.

You know you’re happy with your rifle when all these new AXSR photos aren’t making you flinch. Just need that 308 mag to come in :p
 
Last edited:
View attachment 7334432

Mounted a new ZCO527 on Spuhr QDP-6002 and recently added the RRS plate. I’m feeling like my AXMC is finally “done” for the time being except for minor tweaks here and there.

You know you’re happy with your rifle when all these new AXSR photos aren’t making you flinch. Just need that 308 mag to come in :p
Totally agree!

Our rifles are twins other than mine is left handed...
 
awesome, glad to hear! How did you like the action? Feeding, bolt throw etc. Thanks for sharing 🇺🇸
It is damn nice, the 300NM is very manageable not much more recoil than my .308 and it hits with authority. Initial groups at 200 were around ..75 with factory Berger ammo.
I loaded up some 215 Bergers on top of H1000 and it
Hammers.

Lapua
215M
Avg-3070
Es-9
Sd-3.5
 
Sorry, I’m new here. Couldn’t figure out how to type and post a pic in the same post lol. Love this forum. Just got my scope mounted and thought to contribute because everyone loves pics right?. Still waiting for my bipod
 
  • Like
Reactions: AIAlan
Nice! What color is this??? Elite sand or DE? PB? What moa Spuhr is that?

I wish I could attend that shoot that weekend but I’ve got a divorce trial on the 15th and will be prepping that weekend. Thanks for inviting me. Utah gun guys are always cool like that.

DE
10.3 MOA