Gunsmithing Cerakote / Timney Trigger

[Hobo Hilton]

Applying Cerakote H-Series to a Timney Trigger.....

Cure calls for 250 degrees for 2 hours....

Will this do harm to the trigger assembly?

Hobo

Properly Curing Cerakote Elite-Series and H-Series | Cerakote

Cerakote Elite and H Series are both oven-cured products. Be sure to follow the proper curing schedules.

www.cerakote.com

 

[deadly0311]

I’d advise against it. Why do you want to coat the trigger anyway? It’s going to likely ruin the springs and you’ll most likely never get all the blast media out

 

[Hobo Hilton]

I’d advise against it. Why do you want to coat the trigger anyway? It’s going to likely ruin the springs and you’ll most likely never get all the blast media out

I'm going to only coat the part of the trigger that is exposed. I'm not coating any of the internal parts... Good question. Thanks

 

[Danny1788]

Take the trigger shoe out of the trigger housing and cost it like any other part.