Accuracy International Picture Thread

[Surly]

ERA-TAC Adjustable Inclination Mount

ERATAC - one-piece mounts of various types › eratac

ERATAC mounts represent highest quality. We have one-piece mounts in short or extended versions, with adjustable inclination and other accessories.

www.eratac.de

Thank you Sir. I plan on running the MED ZCO rings and was trying to figure out how the 527 would fit on an AXSR.

edit: It sounds like the 1.1" ZCO rings will not fit my application.

 

[clubsportmark]

56mm objective on a flat top receiver / continuous rail such as the AXSR you would really be needing 1.5” height mount to clear you including scope caps.

Looking at the Era-Tac website it looks like they provide the BH, base height of their scope mounts rather than the standard rail to the centre of the rings. If you went with one, hopefully someone will chime in with which one you need. But Era-Tac along with Spuhr and Tier one are all top quality.

Might also find this useful:

Spuhr, Will It Fit? - Mile High Shooting

Most items from Spuhr are marked with a model number and a batch number. When ordering please refer to the model numbers.

www.milehighshooting.com

 

[tacops1]

56mm objective on a flat top receiver / continuous rail such as the AXSR you would really be needing 1.5” height mount to clear you including scope caps.

Any idea on an AT with AX butt stock, high rail running 34 mm tube and 50 mm objective ya think 1” to 1.18” would work fine ?

 

[Krob95]

Any idea on an AT with AX butt stock, high rail running 34 mm tube and 50 mm objective ya think 1” to 1.18” would work fine ?

Any idea on an AT with AX butt stock, high rail running 34 mm tube and 50 mm objective ya think 1” to 1.18” would work fine ?

If you have the low cheek piece, I don’t see why 1.18” rings wouldn’t work

 

[tacops1]

If you have the low cheek piece, I don’t see why 1.18” rings wouldn’t work

Ya think 1” would or too low ?

I was looking at spuhr 1” or arc 1.10”

 

[eo3x0]

I run 30cal brakes on my barrels so I can swap them around if need be without any issues. I don't see any performance issues having a over sized brake. Even when I ran a 30cal on a 6mm I didn't have any performance issues. I however, I prefer the APA Little Bastard brakes to the 419 Sidewinders.

Yup, I run a Cadex MX1 30 cal but shoot 6.5 creedmoor. Not a problem for me and I can highly recommend the MX1 over the factory AI brake for performance. No numbers to share, but this is based on subjective shoulder feel (and ability to maintain sight on target after the shot)

 

[Krob95]

Ya think 1” would or too low ?

I was looking at spuhr 1” or arc 1.10”

I’d probably go with the tallest low rings to be safe if no one chimes in. 1.10 or 1.18’s. 1” feels like a gamble, but you do only have a 50mm objective.

 

[tacops1]

I’d probably go with the tallest low rings to be safe if no one chimes in. 1.10 or 1.18’s. 1” feels like a gamble, but you do only have a 50mm objective.

I wanted to try the spuhr rings they only have 34mm 1” and 1.35”

ARC is 1.10 medium and half the cost with solid technology so maybe I’ll go with the ARC and use the low cheek piece if needed

if 1” spuhr will with I mean it’s only a tenth and 50mm optic I’ll just try them out I guess

 

[clubsportmark]

I run 1” high spuhr rings on my AT. I have a low action rail but thumbhole not AX stock. I have a hoptic saddle blanket on its lowest setting and it’s only just ok. Need to bury my cheek in to get correct relief.

If your running the high rail that might solve issues with the low cheek piece.

 

[BuLLet]

On the Elite Sand AXSR Era-Tac. Either the 1.65 inch high or 1.46 inch I'd have to check.

T2064-0025 1.65

T2064-0020 1.46


On the Flat Dark Earth AXSR a Spuhr SP-6602.

What mount are you using? Thanks!

 

[The Durk]

Out trying to “catch” a deer today. The AT in its natural environment.

 

[Surly]

On the Elite Sand AXSR Era-Tac. Either the 1.65 inch high or 1.46 inch I'd have to check.

T2064-0025 1.65

T2064-0020 1.46


On the Flat Dark Earth AXSR a Spuhr SP-6602.

Thank you BuLLet, I plan on going with the SP-6002.

 

[tacops1]

I run 1” high spuhr rings on my AT. I have a low action rail but thumbhole not AX stock. I have a hoptic saddle blanket on its lowest setting and it’s only just ok. Need to bury my cheek in to get correct relief.

If your running the high rail that might solve issues with the low cheek piece.

That’s what I was thinking also.... hummmm.... or higher rail, higher stock, same but maybe the lower cheek piece will help...maybe the ARC 1.10 with low cheek piece would be better ?

 

[Fixr]

Out trying to “catch” a deer today. The AT in its natural environment.

LOL, that's the same thing the GF asks me everytime I come back from working game control at a local airport. Not cold enough but wet enough here...

 

[Krob95]

LOL, that's the same thing the GF asks me everytime I come back from working game control at a local airport. Not cold enough but wet enough here...

View attachment 7488879

Game control at an airport? Y’all hiring?

 

[khymiller2]

Hi, what is your range finder device?

LOL, that's the same thing the GF asks me everytime I come back from working game control at a local airport. Not cold enough but wet enough here...

View attachment 7488879

 

[The Durk]

I missed the boat on that LRF from SilencerCo. I’ll be out again tomorrow morning before work.

 

[blbennett1288]

Hi, what is your range finder device?

Silencerco Radius

 

[The Durk]

Here’s another from today.

 

[eo3x0]

Silencerco Radius

No idea why these were discontinued, smh

 

[The Durk]

Because it’s silencerco.

 

[candyx]

Here’s another from today.
View attachment 7488916

Was it cold out ?

 

[Tims]

Any idea on an AT with AX butt stock, high rail running 34 mm tube and 50 mm objective ya think 1” to 1.18” would work fine ?

Yes it will work. I run the high rail, Spuhr 1.18 mount, 34mm tube, 56 objective.

 

[tacops1]

Yes it will work. I run the high rail, Spuhr 1.18 mount, 34mm tube, 56 objective.

1” should work then with 50 mm sounds promising I’ll check into it...worst case 1.10 arc

 

[Jgrovem110]

Finally a member of the AI family

 

[deersniper]

LOL, that's the same thing the GF asks me everytime I come back from working game control at a local airport. Not cold enough but wet enough here...

View attachment 7488879

SOOOO

Jelly

 

[deersniper]

Because it’s silencerco.

No. B c all the shooters said they were gay. Then brownells blew them out for $400 now people sell them for $1000

 

[Krob95]

Got my Area 419 hellfire 30 cal brake in today. It looks so tiny with the brake as opposed to the Ultra 9 on the end

 

[tacops1]

Got my Area 419 hellfire 30 cal brake in today. It looks so tiny with the brake as opposed to the Ultra 9 on the end View attachment 7489100

I need them to expedite their ZCO MOA /MOA optic ugh a 4-20 ZCO MOA would go so good on a rifle build I’m doing

 

[Huskydriver]

I need them to expedite their ZCO MOA /MOA optic ugh a 4-20 ZCO MOA would go so good on a rifle build I’m doing

Gross why?

 

[Krob95]

Gross why?

Because he is scared of mils??? Lmao jk jk

 

[tevans0707]

Gross why?

Some people need to keep hunting scopes alive

 

[Krob95]

Had to make a meme just for this occasion all in good fun @tacops1

 

[tacops1]

Because he is scared of mils??? Lmao jk jk

I’m def scared of that ancient math

.25” =USA MATH

 

[tacops1]

Some people need to keep hunting scopes alive

That’s right hunt and shoot all with one lol twice the fun

 

[Krob95]

I’m def scared of that ancient math

.25” =USA MATH

Mils is still USA math if you believe hard enough

 

[Huskydriver]

I’m def scared of that ancient math

.25” =USA MATH

Grant me the strength...I gotta just walk away...

 

[M8541Reaper]

I’m waiting for a return to our roots...ZCO SFP with Mil/MOA. #SparksJoy

 

[Huskydriver]

I’m waiting for a return to our roots...ZCO SFP with Mil/MOA. #SparksJoy

 

[Huskydriver]

The reason I ask.os this becomes the reality of setting up guns when you shoot with NV. I think folks have this idea of "one way" to set up a gun and it doesn't work when you introduce NV and a limited front rail space. I used to teach: put on your PVS-22/26/30 mount your scope, then adjust your LOP. Just like a stop and go traffic the guys at the end of the line are going to feel the accumulated adjustment. Who really gives a shit about the literal length of your forearm? The stock seats in your shoulder. Your elbow is a joint and can bend. Your neck length is more important.

Low ring height is the same thing imo. It is over emphasized here. Use the cheek piece and lift the face up. There isn't really any advantage to being as low as possible on a gun like an AI. But you have to have enough height to align your scopes exit pupil with a UNS. As a matter of reality with NV.

Just an observation that flies in the face of a lot of common belief on SH.

For sure. There is a sweet spot for me with how my shoulder/upper chest and elbow feel the most comfortable when im position which is a tad longer than what I think most folks run. I also don't like the "feel"? of the ax stock when it's adjusted past halfway so I use the spacers to keep it collapsed 75% of the way in. Got to be the most comfortable rifle I have ever been behind.

Do you just have a short action ai? The axmc has about 3" more rail space iirm and I don't have an issue getting my 30 up there with how x my day optic was set up. My ar on the other hand....

 

[Fixr]

Game control at an airport? Y’all hiring?

I wish! With the "virus" we can't fill any vacant slots externally.....

 

[The Durk]

Jeezus.....I shoot whitetail like dogs where I grew up on the east coast. Never had to be that hard.

I’m from western Pennsylvania, where they close down schools for opening day of rifle season lol. We have a “3 up” antler restriction in our management zones. By the time our season starts, most deers are in the lockdown phase. If I’m lucky, second rut will kick up soon.

 

[The Durk]

Was it cold out ?

It was going between 28-30°F the entire day.

 

[Krob95]

I wish! With the "virus" we can't fill any vacant slots externally.....

What a shame

 

[samb300]

Grant me the strength...I gotta just walk away...
View attachment 7489142

I hope you have some Mil/Mil ZCOs in that purse of yours...

 

[Huskydriver]

I hope you have some Mil/Mil ZCOs in that purse of yours...

I mean...it's not a purse it's a satchel....but yes I am running zco as my primary these days

 

[samb300]

I mean...it's not a purse it's a satchel....but yes I am running zco as my primary these days

View attachment 7489269

Back when the show “24” was on, Jack Bauer always had a conveniently hidden satchel stashed somewhere for when he needed it. I always joked that it’s not a satchel unless it has a gun, sat phone, and fake IDs in it. I highly doubt LeBron has anything in his besides some black dye hairspray and an affirmation journal telling himself he’s better than Jordan

 

[Huskydriver]

Back when the show “24” was on, Jack Bauer always had a conveniently hidden satchel stashed somewhere for when he needed it. I always joked that it’s not a satchel unless it has a gun, sat phone, and fake IDs in it. I highly doubt LeBron has anything in his besides some black dye hairspray and an affirmation journal telling himself he’s better than Jordan

Tbh I don't watch basketball and I just needed a walking away gif haha

 

[J-Ham]

... and an affirmation journal telling himself he’s better than Jordan

But... But... But... He's the GOAT, just ask him! Haha

 

[craigos]

Thanks to MikeM @ MHSA ... new ASR made it home. Sorry for the crappy cell phone pic. Have a NF beast moving from my A308 to this. Got a 24" 6.5CM in the same color. Manage to get a great deal on a Ultra SR here so that went into ATF jail a month ago and got a Dominus SR for the 6.5/308.