Suppressors Which mount

[Nimothy]

With the scarcity of 51t and the fact that my sdn6 need work anyways planning to send my 3 aac cans to Ecco soon to be redone. I’m only familiar with an area 419 set up and 51t so I might be behind the times a bit. I’m not a fan of the area mount on my short gas guns so I need a muzzle device of some sort. What mounting system gives me the most bang for the buck so to speak. I know lots of y’all have a lot of experience with different mounting types. Any help is greatly appreciated

 

[Nimothy]

Any thoughts specifically on the dead air xeno mount? I like the fact the muzzle device looks a2ish

 

[Jnull]

I went plan b on my SDN6. It’s pretty much dedicated to a 300bo SBR unless I need to use a can I don’t care about.

 

[Nimothy]

I went plan b on my SDN6. It’s pretty much dedicated to a 300bo SBR unless I need to use a can I don’t care about.

Are the plan b and plan a interchangeable?

 

[makaug]

Griffin armament's taper mounts are probably the most flexible. They have adapters (Plan A) for what's becoming the industry standard suppressor thread pattern (1.375x24), and have a wide range of muzzle devices and supported muzzle thread pitches. Some are available in titanium, which is nice for lightweight builds.

Muzzle Devices - Taper Mount Muzzle Devices - Griffin Armament

 

[makaug]

Are the plan b and plan a interchangeable?

No, they are not compatible.

 

[FuhQ]

Dead Air KeyMo mount with the DA Keymount muzzle brakes or Keymount flash hiders.

 

[Nimothy]

Dead Air KeyMo mount with the DA Keymount muzzle brakes or Keymount flash hiders.

I looked at these first But they seem to be unobtanium. And over twice the price. Not to mention twice the weight. That adapter is over 1/4 pound. I know the can I’m putting them aren’t feather light but an extra 1/4 pound on the end of a 10.3” gun is a lot

 

[Nimothy]

Griffin armament's taper mounts are probably the most flexible. They have adapters (Plan A) for what's becoming the industry standard suppressor thread pattern (1.375x24), and have a wide range of muzzle devices and supported muzzle thread pitches. Some are available in titanium, which is nice for lightweight builds.

Muzzle Devices - Taper Mount Muzzle Devices - Griffin Armament

I think this is way I going to go. For function and economics I don’t think there is a better option for me. Thanks everyone for their inputs.

 

[Nimothy]

@HansohnBrothers can you help me source everything I need?

 

[HansohnBrothers]

@HansohnBrothers can you help me source everything I need?

Possibly. Everything we have is on our website. What exactly are you looking for?

 

[AlphaThree]

No, they are not compatible.

they aren’t compatible but if OP threads his suppressor with the 1.375x24 he can use the plan a, plan b omega, YHM, etc. definitely get it threaded for 1.375x24 than you have all kinds of mounting options

 

[30-30]

I really like the yhm qd system for semiauto platforms. simple, taper for sealing/alignment, one hand on/off and inexpensive. only negative is weight, but the micro version are bringing that down.

 

[elwarpo]

I just go direct thread. I will be experimenting with the TBAC SR as soon as it clears ATF jail. Direct thread is simple and I rarely shoot rifles carbines without a can.