• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Manners Composite Stocks Estimated Lead Times

D7581447-7B8B-4200-BB40-57CF2784860C.jpeg
Had a flat top T4A in hand from a match table. Sent it in for inletting and install of Gen II mini chassis and Area 419 weighted arca rail. They received it June 29th and I had it back in my hands September 14th. Work looks great and I'm excited to get my .223AI put together once the action comes in!
 
Last edited:
@RobertB it was good to meet you on Saturday man! Pretty cool to shoot with and learn from they guy I ordered my stock from. Yep me and my Dad are fans of Manners for sure!
 
  • Like
Reactions: RobertB
How do you like the T2A compared to the bravo, I’m looking to find something with a similar feel
The forend on the T2 is wider which I like. Grip thickness is similar. The Bravo is awesome for what it is, but I LOVE this Manners stock. The forend on the bravo is short; if I would’ve kept it, the next thing I would’ve done was add a spigot to put the bipod further out.
 
  • Love
Reactions: RobertB
The forend on the T2 is wider which I like. Grip thickness is similar. The Bravo is awesome for what it is, but I LOVE this Manners stock. The forend on the bravo is short; if I would’ve kept it, the next thing I would’ve done was add a spigot to put the bipod further out.

Good to know, I like the ergonomic of the bravo but that fore end is definitely to short for my liking. I keep toying with the T2A or the PRS1
 
  • Like
Reactions: RobertB and JC0352
Good to know, I like the ergonomic of the bravo but that fore end is definitely to short for my liking. I keep toying with the T2A or the PRS1
FWIW, I’m on the short end so I ordered mine with a 13” length of pull. It’s about the same length as a Bravo with no spacers; perfect for me.
 
I know I'm a Manners guy but I think I have a spacer kit for the Bravo laying around if you needed anymore.
 
FWIW, I’m on the short end so I ordered mine with a 13” length of pull. It’s about the same length as a Bravo with no spacers; perfect for me.
I just picked up a PRS1 that I need to ship over to manners to have them add a LOP kit
 
MCS-TCS still waiting, too excited to give it a run 😭

ordered 12 March 2020
Still nothing

i’ve been told 3-4 weeks twice over a 8 week period.

I’ve had forms 4s come back faster recently.

I hope it’s worth the wait!
 
  • Like
Reactions: King_beardsly
MCS-TCS still waiting, too excited to give it a run 😭

ordered 12 March 2020
Still nothing

i’ve been told 3-4 weeks twice over a 8 week period.

I’ve had forms 4s come back faster recently.

I hope it’s worth the wait!
You made an order as the country was shutting down... They will get it to you. It will be worth it.
 
MCS-TCS still waiting, too excited to give it a run 😭

ordered 12 March 2020
Still nothing

i’ve been told 3-4 weeks twice over a 8 week period.

I’ve had forms 4s come back faster recently.

I hope it’s worth the wait!
Bet it’s soon sir. Did the Group buy and ordered my TCS on 3/31. Paid for yesterday. Mine was pretty simple spec, TCS in GAP and 2 flush cups.
 
Ordered a flat top that was in stock and had mine in 4 weeks i was on the fence about spending so much but this thing is a dam work of art

Did ceramic coat it to gloss it up just a hair

Prs 1, barricade mini chassis and badge pic rail

Im one happy customer......and want another lol

View attachment 7373900
Tell me more about the ceramic coat!!
 
Its a coating they use on cars think of it like a wax but its a chemical bonded coating essentially

On cars last years and make it easy to get stuff off the paint ext while providing a good shine

Not exactly hard stuff to put on if you know what your doing but also should have a clean contaminate free surface before applying it

In this situation it wasnt really needed a wax or a spray sealant would have done the trick but i had a buddy that does it professionally with nothing to do on a sat night polish it up by hand and apply it to gloss up the finish a bit.....also anything i get on the gun will now prolly dam near slide right off
 
  • Like
Reactions: BisSilent
Its a coating they use on cars think of it like a wax but its a chemical bonded coating essentially

On cars last years and make it easy to get stuff off the paint ext while providing a good shine

Not exactly hard stuff to put on if you know what your doing but also should have a clean contaminate free surface before applying it

In this situation it wasnt really needed a wax or a spray sealant would have done the trick but i had a buddy that does it professionally with nothing to do on a sat night polish it up by hand and apply it to gloss up the finish a bit.....also anything i get on the gun will now prolly dam near slide right off
I was going to ask why not just order it in gloss from Manners, then my reading comprehension kicked in and noticed you’d ordered a flat-top. lol
 
Total weight with MTU 26" weight Area419 arca rail,bipod and homemade butt weigh is 18.8#

Balance point is about 2" in front of magwell.
I'll get a picture of the balance pont this afternoon.
Not bad, I’m trying to figure out what I’ll be sitting at with a similar setup
 
Last edited:
MCS-TCS still waiting, too excited to give it a run 😭

ordered 12 March 2020
Still nothing

i’ve been told 3-4 weeks twice over a 8 week period.

I’ve had forms 4s come back faster recently.

I hope it’s worth the wait!
Hey man, send me a DM or e-mail me at [email protected] with your order number and I'll be happy to follow up on it. I want that thing in your hands. I think you'll love it!
 
i see Manners has stocks ready to ship. are these in stock?
 
They do them 3 ways

Custom order (self explanitory)

Flat top - these are stocks already painted ext but ready to be machined for what ever setup you want (lead on my mine was 8 weeks got it in 4)

Ready to ship - stocks that are ready to go and have been machined for a certain action and barrel profile
 
  • Like
Reactions: Buzzbee
Does anyone know if it’s possible to get a PRS1 with heavy fill? I like the stock design, just want a bit more weight in it.
 
  • Like
Reactions: Redvanes
I ordered my Manners T2-A GAP stock on April 10 received it on December 11. I had to open the trigger well a little so the Accutrigger would work properly. I’m very impressed with the quality of the stoke. Thanks Robert for all of the help!
1CD2B527-CCAA-41D8-B3FD-89A7D63F4466.jpeg
 
On the flat top stocks: are they right/left hand specific or is that part of what gets cut to order? The website lists most of them as right-handed but allows you to select either right or left hand as an orientation.

Thanks
 
On the flat top stocks: are they right/left hand specific or is that part of what gets cut to order? The website lists most of them as right-handed but allows you to select either right or left hand as an orientation.

Thanks
Pretty sure they can be cut it either way since it’s essentially a blank slate.
 
Just paid for my PRS-TCS from the group buy. Ordered beginning of April.

No shipment notification yet but looking forward to it.
 
Last edited:
  • Like
Reactions: jmw and _308_
Just paid for my PRS-TCS from the group buy. Ordered beginning of April.

No shipment notification yet but looking forward to it.

I just got mine that was ordered in March, you're going to love it!

Here is the set up I put together for Mammoth 2021, 14lb as it sits. With all the weights thrown in and a steel 26" barrel it comes out to 24lb. Super happy with the ability to adjust and "customize" the weight and balance! Crappy picture I know...
 

Attachments

  • rifle.jpg
    rifle.jpg
    188.9 KB · Views: 95
Ordered a PRS-TCS on Dec 3, was delivered on the 10th. Not the norm I know but I'll consider it reparations for all the times I was quoted "Oh it'll be a couple of weeks or so" --- 6 months later. (Not talking about Manners, this is my first MCS)

I'm assuming you ordered a one off the website and didn't have a one built. That's generally very quick, its the custom order that takes 6 months or more.
 
I'm assuming you ordered a one off the website and didn't have a one built. That's generally very quick, its the custom order that takes 6 months or more.
No actually I ordered and paid a deposit on the 3rd, fully expected 3 months or more. Got a call on the 7th wanting my cc#, person who WAS getting this stock backed out.
 
This thread is making me anxious. I ordered a PRS1 back in July, and from the looks of it I am still 2-4 months out. Not a big deal as I am waiting on 300 PRC lapua brass, but the anticipation of what is coming is killing me.
 
  • Like
Reactions: _308_
Ordered a PRS-TCS on Dec 3, was delivered on the 10th. Not the norm I know but I'll consider it reparations for all the times I was quoted "Oh it'll be a couple of weeks or so" --- 6 months later. (Not talking about Manners, this is my first MCS)

Lucky you, 18 months and waiting here in Australia 😩😩