• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Tikka T3 Thread

SHOT 2020 said there was going to be a 6.5 prc, but that was before the 'rona. I wonder if it got scrapped or if its still coming?
 
Any rumors or un/official updates on new calibers or twist rate barrels coming from Tikka in 2021?
What would be better is if they allowed importation of everything listed on the choose.tikka.fi/usa site. More lefty options. Also lefty t1x.
 
  • Like
Reactions: davsco
Has anyone ever modified a KRG bravo to take a long action cartridge?
 
6F458CA0-11E0-46AA-A6BB-501DB5D41DA3.jpeg
It’s real. First one goes to me!

LRI tikka bolt.

Woot woot!
 
I am changing the barrel on my Tikka CTR so I read about how hard it is. It is 3 years old T3x , after 4 attempts I succeeded today finally. I soaked it in Kroil over a week, tried brown sugar, then heat with a heat gun to the action, then ice pack on barrel and heat action while using a pipe wrench(eek) on the barrel and it took every ounce of my energy to break it free as I did not have a pipe to add to the wrench handle. Holy crap that was on there. I remember reading about someone's theory of the factory putting the barrel on while the action is hot, I bet they did with mine because that sucker was on there.
 
I am changing the barrel on my Tikka CTR so I read about how hard it is. It is 3 years old T3x , after 4 attempts I succeeded today finally. I soaked it in Kroil over a week, tried brown sugar, then heat with a heat gun to the action, then ice pack on barrel and heat action while using a pipe wrench(eek) on the barrel and it took every ounce of my energy to break it free as I did not have a pipe to add to the wrench handle. Holy crap that was on there. I remember reading about someone's theory of the factory putting the barrel on while the action is hot, I bet they did with mine because that sucker was on there.
What did you use to hold the action.
 
I am changing the barrel on my Tikka CTR so I read about how hard it is. It is 3 years old T3x , after 4 attempts I succeeded today finally. I soaked it in Kroil over a week, tried brown sugar, then heat with a heat gun to the action, then ice pack on barrel and heat action while using a pipe wrench(eek) on the barrel and it took every ounce of my energy to break it free as I did not have a pipe to add to the wrench handle. Holy crap that was on there. I remember reading about someone's theory of the factory putting the barrel on while the action is hot, I bet they did with mine because that sucker was on there.
I've just took mine off tonight. Its a stainless T3 270 wsm. I've mixed acetone and kroil and let it soak for about five days reapplying daily. Used older vice with wooden block inserts, lead spacers and rosin. Wrapped the action and barrel with paper, torqued it down, re torqued it and on second whack from dead-blow hammer it came loose. I was pleasantly surprised
 
Bs on shock vs torque.

Not saying the hammer doesn’t work. It’s just applying more torque then the method that doesn’t work.

Don’t bind up threads. Either by clamping over them, or not applying 90 of force.
 
  • Like
Reactions: patriotnation
Bs on shock vs torque.

Not saying the hammer doesn’t work. It’s just applying more torque then the method that doesn’t work.

Don’t bind up threads. Either by clamping over them, or not applying 90 of force.
By that I meant that I have seen lots more success in this thread and others over the years when they use a dead blow vs other methods of slow torque. I have read every post of this thread. There are many examples where people said they got it off easier with a dead blow. There are also examples where gunsmiths tried to wrench it off and decided to cut a groove. Dead blow on a wrench is still torque. It's just a different type. It is a shock type torque vs a slow torque. Difference between a torque wrench vs air impact wrenches. Impact type torque devices exist for a reason.
 
Deam, that is looking good sir.

Haha yeah I was pretty stoked!

My family came from Tornio river valley area. Except for my grandma Heikkenen who was from Oulu.

Both parents learned Finn before English.

Kinda funny to go into LRI shop because a fair of my childhood either working or waiting for dad in a tool and die shop run by a family of Finnish immigrant. That smell brought instant memories.

The bolt will be fed lapua 6br 105 ammo exclusively with the .48 bolt face. Most times 80gr eld-m with factory 20” at 2850.

We call the rifle Rottutauti. Rutter for short. Deer, yotes, speed goats,sage rats, tree rats, turkeys.. Killing machine.
 
I think you mean Heikkinen, that is quite common name in Finland.
Tornio is a border city in Finland, it´s nearly a Sweden :)
My grandmother brother lived in Tornio, so i have been there few times.
And i do rember those trips to Sweden, sugar and butter was the souveniers of those trips at 80´ties :D
 
Yeah spelling error. My best friend is a Heikkinen and I screw it up all the time.

The sisu gene still holds

Most of the family records got burned when the Germans torched tornio

From what I recall Tornio sits just up from where the river enters the Gulf of Bothnia

Lifetime goal is to take a sauna after a ride on the lainelauta on the Bothnia some fall.


Back to tikka’s.
24E9F5FC-6B8D-46E9-9F1A-B9365B99585A.jpeg
The extractor on the LRI edition is a lot longer then the factory one
 
  • Like
Reactions: 260284
I got 2800 with StaBall with that exact setup plus a suppressor. Hornady factory brass and the ELD-MS seated to 2.905 coal. Without high pressure. I think with a faster stick powder like 4350 you'll pressure out first. Id recommend R16, R23, StaBall, 4831, R26 with the 140 seated closer to the lands than factory ammo. Factory Hornady 140 had a 110ish thou jump iirc.

Great info. I appreciate it. And I just picked up 3lb of rl16 yesterday.
 
Anyone know if it’s possible to buy an extra comb piece for a CTR stock? I want to put one on my t3x lite.
I think they are available but super expensive like every Tikka aftermarket factory part. Like the fact that you can buy an aftermarket bolt handle for what the little ball and set screw on the CTR costs. These are sold out but I'm guessing that's standard pricing. https://www.midwestgunworks.com/page/mgwi/prod/s585t391
 
Are the MDt poly-steel 308 mags running well in KRG W3 chassis w/ Tikka CTR 6.5cm? Best 5 round mag in aforementioned setup?
 
It's starting to look a lot like Christmas! Just received the Mesa Precision Arms - Altitude stock (26.74 oz) and Proof CF Pre-fit barrel chambered in 6.5 PRC (24" 1/7.5). Just waiting on @LongRifles Inc. to put magnum bolts on sale.. Maybe I'll post up my .308 bolt for sale afterwards!
 

Attachments

  • Barrel.jpg
    Barrel.jpg
    492.1 KB · Views: 92
  • Stock + Barrel.jpg
    Stock + Barrel.jpg
    544.8 KB · Views: 97
  • Stock.jpg
    Stock.jpg
    674.2 KB · Views: 101
  • Stock Weight.jpg
    Stock Weight.jpg
    356.6 KB · Views: 90
Took my CTR 260 out calling coyotes in the Northwoods this weekend. No luck.(we had wolves howling all around each night which makes coyote pretty scarce). Probably the last adventure with the factory stock. I’m going back to a KRG bravo.
D87E5730-6DE9-4936-9BB8-9ABE840727CA.jpeg
 
It’s real. First one goes to me!

LRI tikka bolt.

Woot woot!
Back to tikka’s. The extractor on the LRI edition is a lot longer then the factory one

Did Chad hint as to when they will go on the sight?

It's starting to look a lot like Christmas! Just received the Mesa Precision Arms - Altitude stock (26.74 oz) and Proof CF Pre-fit barrel chambered in 6.5 PRC (24" 1/7.5). Just waiting on @LongRifles Inc. to put magnum bolts on sale.. Maybe I'll post up my .308 bolt for sale afterwards!

Same. Currently having a hard time deciding on cartridge for our Tikka Build thought i was going to go 6cm but rethinking 6.5 SAUM. since i have all the components for it.
 
  • Like
Reactions: tbx
Ok guys, who here as actually done the Tikka switch barrel with shouldered barrels. Looking for feed back on how repeatable it really is and how much of an issue keeping track of 2 or more zeros are?

Current plan would be to swap between a 6.5 creed and .223. Really hoping LRI comes through with some reasonable .223 bolts because those things are impossible to find.

Main reason is that getting into a .223 as a separate rifle is going to be way more than a new barrel and bolt.
 
  • Like
Reactions: BigBabyMoses06
T3 vs T3x actions are the same metal make up

T3 vs T3x, recoil lug is bigger, metal bolt shroud, different tapped wholes for a picatinny rail, better reinforced stock and recoil pad.

Barrel/action is the same profile size, but it just different metal material between the blued/SS.

you can prevent rust by taking care of the metal. I love to practice shooting in the weather (rain/snow) but I always make sure that I wipe it down with a gun oil rag before I store it back into the safe, if it got watered on.

If you find a screamin deal on a T3 I wouldnt hesitate buying that over a full priced T3x. I look on Asmslist all the time for T3 because I know im going to change things out on it and ill take a good deal any day.

I have T3 and T3x, the recoil lugs are the same size, the T3 were aluminum and the T3x are mild steel. If you are shooting a hard recoiling caliber, then replace it with a good stainless lug. Never bent the aluminum lug with a 260. Aftermarket chassis and stocks usually come with stainless or steel lugs.
 
Looking for a mag for a CTR bottom for a 25SST. Will a std CTR mag work with just bending the feed lips out a bit?
Don't want a 10rd sticking way out the bottom.

I have seen a guy run 6.5 SAUM in a CTR mag. He was able to get 5 or 6 rounds in it.
 
  • Like
Reactions: CJC73
Recently sold one of my "spr"esque ar uppers and optic, thinking of getting a 223 CTR for plinking or getting into 22lr. I love my CTR in 6.5 and a matching 223 would be dope, but would you guys spring for something cheaper at this point, like a Ruger American Ranch? Kind of a silly question in a Tikka thread...but idk!

Get the 223 Varmint if you want a little cheaper than a CTR.
 
  • Like
Reactions: GrumpyOleFart
Are there any Tikka Chassis that uses factory magazines?

Any of the German Gun Stock offerings. I have 3 with the CTR inlet and my son has one with the standard inlet. They all have an aluminum mini chassis that requires no bedding at all. I swap rifles between them and don't have to worry about any zero shift.

This is my Reaper with a Bartlein BugNut barrel in it. Had it in their Ranger before deer season.
20201206_154616.jpg
IMG_20201212_083207_774.jpg
 
Haha yeah I was pretty stoked!

My family came from Tornio river valley area. Except for my grandma Heikkenen who was from Oulu.

Both parents learned Finn before English.

Kinda funny to go into LRI shop because a fair of my childhood either working or waiting for dad in a tool and die shop run by a family of Finnish immigrant. That smell brought instant memories.

The bolt will be fed lapua 6br 105 ammo exclusively with the .48 bolt face. Most times 80gr eld-m with factory 20” at 2850.

We call the rifle Rottutauti. Rutter for short. Deer, yotes, speed goats,sage rats, tree rats, turkeys.. Killing machine.

Is the rifle a 223 CTR?
 
Great info. I appreciate it. And I just picked up 3lb of rl16 yesterday.

I run Rl16 with the 140 ELDM in Peterson SRP brass. Got 2840 fps out of a 28" Bartlein with 41.4 gr running .055" off the lands. One hole accurate. I get 2701 with the 143 ELDX out of my 18" Bartlein with 42 gr.
 
Ok guys, who here as actually done the Tikka switch barrel with shouldered barrels. Looking for feed back on how repeatable it really is and how much of an issue keeping track of 2 or more zeros are?

Current plan would be to swap between a 6.5 creed and .223. Really hoping LRI comes through with some reasonable .223 bolts because those things are impossible to find.

Main reason is that getting into a .223 as a separate rifle is going to be way more than a new barrel and bolt.

I have done it with a 6.5 Creedmoor and a 22 BR. I used 3/4" flats and can swap them with a torque wrench and a crows foot holding the rifle between my legs. I use 40 ft/lbs. I make the same changes to my scope everytime.
20200205_194049.jpg
20200227_181924.jpg
20200205_194049.jpg
20200227_181924.jpg
20200227_181948.jpg
 
Question on reloading OAL of a 308 ?
I'm starting to reload test rounds for my 308 TAC 1, I find that I can reload 168/175's to a OAL of 2.93" (+-) and they function through the Mag. Does anyone else load their 308's to longer than the 2.8" (+) "standard" ??
 
Switch barrel for me is more about seasonal changes then on a day in day out basis

I’d want to epoxy the action to the stock/chassis if it’s a regular occurrence.

Besides that make a witness mark and torque the same amount. For factory barrels it’s been money. But I’m shooting more like 1-1.2 moa 10 shot groups and from field positions so a .1 mil shift would be hard to detect. Ymmv
 
  • Like
Reactions: 260284