Will all those weights, should have just bought a black rifle and saved the FDE model for someone else! Haha.
Cool rifle man. Not sure how I feel about the look of those weights compared to the basic AI offering. Who makes them?
- Thread starter Peter Laurvick
- Start date
Cool rifle man. Not sure how I feel about the look of those weights compared to the basic AI offering. Who makes them?
When did you get the black one? Mile high or euro? I’m sixth in line at euro.Last I checked, I never gave a f* what the top shooters in the PRS/ NRL are doing.
AI isn’t going to cry cause the top shooters of a series/ league aren’t using there rifles.
I don’t mind losing points at a match because previous chassis, weren’t meant for comps like the more popular ones you see. Or because I was ‘stuck’ with 10 round mags (can actually fit 11 lol).
Sacrificing points running the gear that I want, is easy to do.
@generalzip All love though SteveI’ll let you mess with mine if you’re going to the AI Classic.
Now let’s get back on track. Black sure does look good
View attachment 7741896
Not to get way into the weeds but how’s that work with 223. Cause single feeding 223 doesn’t work
@MNTC What in the s*. Gotta hit them up tomorrow.
@Stag556 Sawtooth Rifles/ Dependabilt. It's design that way to place your thumb on the grooves. Go check them out! Sawtooth Rifles SideTrak Weights
@Eastern hunter EuroOptic. Shipped last week. They only had 4 come in.
@Stag556 Sawtooth Rifles/ Dependabilt. It's design that way to place your thumb on the grooves. Go check them out! Sawtooth Rifles SideTrak Weights
@Eastern hunter EuroOptic. Shipped last week. They only had 4 come in.
I think what you’re asking for is the POV angle. Or so I’ve been told.
Apparently they didn't get enough to fill the backorders. 6+ ES still didn't get filled. I'm #12 on the backorder for FDE.
Since we haven’t seen the 223 bolt or conversion for the ATX it seems trivial to guess. Why couldn’t you single feed?
@Stag556 @Tritiumdials
The cutout in the weights, is to stack them. Slide them forward or back to your liking. As well as use their SideBite
The cutout in the weights, is to stack them. Slide them forward or back to your liking. As well as use their SideBite
Thanks for the info and pics. I bought the AI weights ahead of time and hadn’t seen these. Cool to see options.
I’m in line with euro/scopelist for an elite sand as well. They told me today there were 6 ahead of me so that 6th must be @Eastern hunter .
I’m #6 for black so if they did get 4 now I’m #2.
Have an AT-X on order and want to get a 6mm barrel spun up. Will AX magazines and the AT-X reliably feed and eject the 6mm Norma BR cartridge without modifications?? My other thought is 6mm Creedmoor mostly because of components I have on hand. Plenty of H4350 and 115g Dtacs/105gn Hybrids. Thanks in advance for any help with 6mm barrel choice.
I had Travis stevens at TS customs do a 6mm creedmoor in a benchmark barrel. He only sells benchmark for a reason. Iv had my barrel waiting for the at-x since April still waiting lol. Travis is awesome to deal with and very fast at getting stuff out. He had me a barrel to my door in 2 weeks time. I have had 3 barrels don’t from him and he is now the only one doing my barrels.
Oh Elite Sand, where can you be. Wait a minute, I just found out... LOL
Anyone have a 1/2 bridge?
Lol and anyone that talked shit on elite sand… suddenly wants elite sand.
Does anyone know which way the stock will fold? And if toward the bolt will a hoptic quiver installed on the mag well interfere with the stock collapsing completely?
They said you’ll be able to flip it so whatever way you want.
A black ATX.Last I checked, I never gave a f* what the top shooters in the PRS/ NRL are doing.
AI isn’t going to cry cause the top shooters of a series/ league aren’t using there rifles.
I don’t mind losing points at a match because previous chassis, weren’t meant for comps like the more popular ones you see. Or because I was ‘stuck’ with 10 round mags (can actually fit 11 lol).
Sacrificing points running the gear that I want, is easy to do.
@generalzip All love though Steve
Now let’s get back on track. Black sure does look good
View attachment 7741896
Might want to avoid driving the next few days.
Or even going outside.
In fact it would be safest if you just sent it to me now.
RIGHT
NOW
13th at EO - pretty sure I was suppose to be in the last batch sent. Who knows know when I will see a black at-x.
I’ll call in the morning.
I’ll call in the morning.
Last edited:
Any idea when the hinge will be released? This is the only real options that interests me
Just gorilla tape clip ons to the barrel?
Waiting on a full bridge cause half bridges are going to come out in 2024
For 6BR parent case cartridges AX mags with HRD Gear 6mm mag spacer inserts will feed 100% reliably.
Stupid question but does the ATX take AT or AX mags?
Was it really easier to scroll all the way back 6 pages and find the post than typing 2 letters? Lol
ATX will take both.
AX are AW mags with a tab up front front. AX mags won’t move as much as AWs if loaded into or placed on a bag. Hence why they feed more reliably than AWs
Is one better than another? I assume from the past posts this chassis is designed to take AX mags? If buying new what’s he better mag to buy?
If you're not sharing mags with another rifle, the AX is the way to go. Better support in the gun.
Just talked to euro I’m now #3 for blackLast I checked, I never gave a f* what the top shooters in the PRS/ NRL are doing.
AI isn’t going to cry cause the top shooters of a series/ league aren’t using there rifles.
I don’t mind losing points at a match because previous chassis, weren’t meant for comps like the more popular ones you see. Or because I was ‘stuck’ with 10 round mags (can actually fit 11 lol).
Sacrificing points running the gear that I want, is easy to do.
@generalzip All love though Steve
Now let’s get back on track. Black sure does look good
View attachment 7741896
I would assume based on the amount of guns allocated this year and early next, that is on the bottom of the list.
How do you like the grip? I ordered that grip for mine when it comes in
For the most part I like it. It feels a touch small to me but I have decent sized hands. I might play around with a couple other grips like the mdt elite. Main reason for swapping it on is its lightweight and got me to 16# LOL
Who spun you that barrel?
Fritz @ Black canyon customs
Yeah you are probably right. Just heard back from MH. No ETA for the AT/AX conversion chassis. No price info either..
What’s the shortest barrel you can put on this chassis and have clearance to put a direct thread can on? Im guessing from pics maybe 21”?
Pretty much the exact setup I plan to use except probably 22” barrel and omega. What grip is that?
MK machine vertical crossover
I wish it was Sage green. The ES is much to Shiney green. Had two ES rifles and sold them for FDE. Won't do another ES. A grey would be cool. But no thanks on the ES.
Cerekote baby
Similar threads
