Recent content by AnschutzNerd

  1. A

    Range Report Balls --- Supersonic --- Balls

    For the Engineers and Gun Smiths, and for people who "...get to push a button underneath the red cover switch." "What on earth" happens about the 15:00 mark, on the video. Ballistic analysis at the 15:50 mark. Interesting video, beginning to end. AnschutzNerd
  2. A

    Buying First Safe Need Advice

    There is a lot of reading that can be completed on this subject via a search. Cliff Notes - How much you spend depends upon how much you want to protect your gear. Fire was and is my main concern. Read all you can about RSC containers. Thats what BassPro sells and 'sheet rock' is their...
  3. A

    Security Cams for the house

    From what I know, the quality of the image starts with the CAMERA 1st, everything after that is spec'd accordingly. POE, IP Cam's are strongly suggested and make install simpler. 8-camera DVR is also strongly suggested, skip the 4-channel DVR if you own a home. From what I am finding, better...
  4. A

    Building custom....which action????

    LRD... I have the rifle you mentioned so, I'll chime in. Deviant in a Sentinel, in the 'old' 308 caliber. Many GunSmiths offer 'their' own custom action. A lot of them are Defiance Deviant's under another name. Want to make a Deviant action 'sticky'? Add cerakote to the bolt or interior of...
  5. A

    Gunsmithing Lapping scope rings

    Agree with the above! The rings are just one part of the system. The rings are bolted to the rail. The rail is bolted to the receiver. The receiver is often deformed in at least one axis. What about receivers with an integral rail? Ocassionally they are out of spec as well. I have lapped...
  6. A

    Good $600 scope for a trainer.

    Here is a great plinker scope usually destined for center-fired rigs. If 16x max works for you, give this a shot. It's also available in mil-dot, if your local squirrels require 'ranging'. Bushnell 6500, 2.5-16x, 42mm (also avail. in 50mm) with a 30mm tube. Focuses to 10-yards (which is great...
  7. A

    Best 22lr for 1200.00

    I have one of each, of the rimfires mentioned. The Kidd Super will very consistently hit quarters at 100. The Anschutz will hit Nickels. (64 and 54). No wind. Decent match ammo. After that, it's Tuners and Eley. 64-MPR for $1200 New. AN
  8. A

    Who makes a non shit inch pound torque wrench that goes to 140 inch/lb

    Or... You could try 11.5-ft/lbs. Another vote for CDI Torque wrenches. AN
  9. A

    Gunsmithing Tapmatic 50x - Suggestions?

    Thanks! Task was completed two years ago using coated OSG taps and stainless specific oil lubricant. ...and a horse-hair brush. AN
  10. A

    Seekins Precisions new 308 Taking orders now!

    Glen - Congratulations on achieving this release. I know it has been a long time coming. ...and send some to Connecticut! =( A.N.
  11. A

    Finishing pieces to the 260. rem Build. Muzzle Brakes?

    <iframe width="560" height="315" src="//www.youtube.com/embed/tMLMof4P8Hk" frameborder="0" allowfullscreen></iframe> They make slightly smaller versions and one of those options would be good for a 260. AN
  12. A

    Gunsmithing Tapmatic 50x - Suggestions?

    I have to drill and tap about 100-holes in 1/4-in stainless steel (304 and 316). I am using cobalt drills for the through holes. The tap size is 10-24. I just purchased a Tapmatic 50x head to complete the task. I have never used one before. Tips? Any suggestions on what type of tap to...
  13. A

    KMW Sentinel help

    I believe the above is incorrect. Terry told me that a heavy Palma would clear his MUNSter NV mount without additional machining of the barrel. 8-months into the wait for a Sentinel. AN
  14. A

    Terry Cross + KMW Sentinel + Defiance Deviant = AWESOME

    Pics not showing up... Please fix. AN
  15. A

    SAC or GAP -- About to order a new Build.

    Hide, Thank You for the over-whelming response to my initial inquiry. I know it's essentially: Win-Now vs Win-Later. * AN
See more
Top Bottom
Back
Home
Forums
Merch
Alerts