davere
Featured content
0
Reaction score
502

Joined
Last seen

Latest activity Postings Featured content Achievements About Feedback Stats

    • davere
      davere replied to the thread 6gt.
      SAC die, .263 bushing, .2400 decapping mandrel, yields .0035 neck tension. I started with a .265 bushing, but wasn't quite getting...
    • davere
      davere replied to the thread 6gt.
      I've been working under the "can't control how dirty the barrel is, but can control how clean it is" method - I'm usually cleaning it...
    • davere
      I inherited about 11lbs of Unique from my father. It very much is an excellent substitute for pretending to shoot black powder loads.
    • davere
      davere replied to the thread 6gt.
      On two barrels, now (Berger 108s with H4350 and Bartlein 5R in one, Berger 109s with Varget and Krieger 4gr in the second), my throat...
    • davere
      davere replied to the thread 6gt.
      Almost exactly what I ran in my last barrel, which was a 26" 7.5tw Bart, from Stuteville, except I was running the 108 Berger...
    • davere
      davere replied to the thread 25x47 Lapua load data.
      The data that Blackjack published a long while back for 25x47 with the 131, Lapua brass, and Varget started at 2825fps, and went up to...
    • davere
      One of the best things I did was got a set of pin gages to measure exact neck ID (after resizing brass) - and with new brass (even...
    • davere
      davere replied to the thread 25x47 Lapua load data.
      Just starting to break in a 25x47 barrel - 26" Bart, 1:7.5. Using Lapua brass. First 20 rounds, I loaded w/ Berger 133s, cause I had a...
    • davere
      davere replied to the thread 6gt.
      If you're going there... I suspect the Lee (or other powder drop) + IP trickler solution will actually be quite a bit faster, FWIW.
    • davere
      davere reacted to 4O6shootist's post in the thread 6gt with Haha Haha.
      "if it's windy I just hold left edge" 🤣🤣🤣 0.2-0.3 mil hold at 500-700 is a 3-4 mph wind with a lil spin drift. Thats not wind my man...
    • davere
      davere replied to the thread 6gt.
      Depends on what "worth it" and "similar performance" mean to you. If you want quick and potentially "good enough" accuracy for most...
    • davere
      A bit of miscommunication on my part. When using the term "ELR" I mean reaching out toward the maximum range of a cartridges' ability to...
    • davere
      davere replied to the thread 6gt.
      I read that as what he's saying is that he's trying/planning to bump .002, but it isn't clear what he should use as the reference...
    • davere
      davere replied to the thread 6gt.
      Yeah, my PTG gauges are same
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…