• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Recent content by kyreloader

  1. K

    6.5x47 Lapua loads?

    Re: 6.5x47 Lapua loads? Target rifle, but should give you an idea about 120g class of bullets with RL15. http://www.accurateshooter.com/guns-of-week/gunweek072/
  2. K

    Range Report **6mm cartridges and corresponding barrel life**

    Re: **6mm cartridges and corresponding barrel life** <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KevinU</div><div class="ubbcode-body">I'm in the process of having a 6mm built. Beanland has my parts, should have the barreled action soon. Sifted through all the...
  3. K

    115 grn 243.

    Re: 115 grn 243. With the new Berger 105g Hybrid in 6mm, I cant understand loading the 115g bullets in the 6mm caliber. The 105g Hybrids have a higher BC and can be driven faster, so ballistics will be improved. Something to think about if you havent already purchased the 115g bullets.
  4. K

    Alliant AR Comp Powder

    Re: Alliant AR Comp Powder Alliant has this data on their website for .223 with the exact bullet that you are asking about. http://www.alliantpowder.com/reloaders/p...mp;cartridge=46
  5. K

    Need help finding a stock pack........

    Re: Need help finding a stock pack........ I like the SKD Tactical, BALS-MK2. It is both the stock pack and the rear bean bag attached. www.skdtac.com
  6. K

    6mm Berger Hybrid

    Re: 6mm Berger Hybrid With the Hybrid having a higher BC than either the DTACs or the 115g Berger VLDs and being able to push them faster, the long range ballistics make more sense to shoot the Hybrids. Killshot, your results are interesting. You have been the first person that I have read...
  7. K

    Fine Tuning a Load's OCW and Seating Depth

    Re: Fine Tuning a Load's OCW and Seating Depth glock24, I agree with your OCW assessment above, but would challenge your seating depth choice. I would have chosen the 10 thous off as my load. Then, as your throat erodes, you at least know that you are good for another 5 thous of erosion...
  8. K

    ??? ar comp in .223

    Re: ??? ar comp in .223 24.7 to 24.8g with the 52g Amax in RP cases was the OCW charge in my FIL's Rem 700 SPS. 25.4g was the max with his rifle. His twist doesnt allow heavier bullets. Hope that helps. Here is a link to my work-up with it...
  9. K

    Making 6.5 CM brass

    Re: Making 6.5 CM brass 260CM is a 6.5x250AI. You can also buy Lapua .22-250 brass and use the COW method to nicely form 260 CM brass if necessary. My brother had a .22-250 that he shot the barrel out of and has a bunch of .22-250 brass left over. He plans to get a 260CM barrel and use...
  10. K

    Stock pad for a left hand shooter

    Does anyone make a stock pad for a left handed shooter? I have a Tac-Ops pad as a gift, but I shoot left handed so my face is on the wrong side. Thanks in advance and sorry if this has been asked before.
  11. K

    ..

    Re: Asking for a second opinion OCW Post your pictures here and Dan will comment. He has an uncanny ability to see the targets and tell you what he sees. I find his knowledge invaluable.
  12. K

    norma 130 gr hpbt .264

    Re: norma 130 gr hpbt .264 Litz BC is higher IIRC, around 575 G1 or 295 or so G7.
  13. K

    284 Win or 7mmRM

    Re: 284 Win or 7mmRM What is your rifle going to be used for? For hunting, I would suggest the 7RM due to the availability of factory loads in a bind. For steel/target shooting, I would load the 284 Win. Better brass, known loadings. Looking at the 7mm page on 6mmbr.com, the 7RM is not...
  14. K

    Chamfer/deburr twice fired brass?

    Re: Chamfer/deburr twice fired brass? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: taseal</div><div class="ubbcode-body">Is it easy to adjust how much you want to shave off? So you can put a longer neck, or shorter neck and it'll shave them to the same length...
  15. K

    Chamfer/deburr twice fired brass?

    Re: Chamfer/deburr twice fired brass? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: taseal</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kyreloader</div><div class="ubbcode-body">I use a 3-way cutter...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts