Recent content by shelpster66

Hello all..... Loaded up some .357 not that long ago and used the 158 gr jsp from Speer. Most of the information I got on this bullet weight made sense and I loaded up about 50 and used them without issue. I have not done a Chrono on them yet, but will tomorrow when I hit the range. These were...

Re: What chronograph? I use the ProChrono that I picked up at Midway on sale.. http://www.midwayusa.com/product/852429/competition-electronics-prochrono-digital-chronograph works great for me....place it about 10 feet from the muzzle of the 308 and get readouts that are all very close. Then...

Re: Neck Separation Makes sense.....I think what I'll do first is back off the depth of the pilot and stay further back from the shoulder. See how that works for me. I have the K&M trimmer and it seems to be a good quality piece of equipment. But, if I'm going too far down the neck, that's...

Re: Neck Separation As the brass flows forward, my thought is it would flow towards the shoulder/neck, that is why I kept the neck turning as part of the process. I didn't realize that the top of the shoulder was going to thin and thus be the weak point as I continued to turn it. My best...

Re: Neck Separation BuzzBoss......I have not measured the chamber area where the neck would be. I was having issues with the round not chambering without having to "push" it in harder that I thought necessary. Turning the necks alleviated some of this, but also realized that it may be the...

Re: Neck Separation Thanks for the replies.... I kinda figured that's what I was doing wrong......you can see in the last picture where the color of the brass changes before it meets the shoulder .....that is where it cuts most of the brass after resizing. It only skims over the rest of the...

Posted this at SC so I wanted to post it here too..... I have been shooting these Win 308 brass for close to 8 reloads on these cases alone. I have started neck turning them about 4 reloads ago and haven't had any issues. The other day at the range I went to chamber a round and it would not...

Re: My Rem 700SPS Tactical (.308) good move with the trigger replacement....did mine too and noticed a huge difference on my trigger pull....Timney FTW!

Re: Official MidwayUSA Codes Just used AR125615 for $15 off of my $120 order......just bought a new Chronograph!!!! YAY!! Competition Electronics ProChrono Digital Chronograph

Re: 155 Scenars with varget thanks guys....ok, started at 45.0, went to 45.6 I will see what they shoot this weekend. Thanks for the heads up!! Mike

Hey guys....been doing quite a bit of research on the posts for info on the subject above. My rife specs are in my sig .....I am looking for a chart that is specific about what the load data is for my rifle. I'm loading Lapua brass, CCI 200 primers, Varget, and 155 Scenars. I'm looking at...

Re: Official MidwayUSA Codes <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Brandon05_88</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: songdogslayer</div><div class="ubbcode-body">AR15610 just worked...

Re: Decrimp tool?? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">http://www.midwayusa.com/product/364181/forster-chamfer-and-deburring-tool-17-to-45-caliber Looks like a rocket, couple twists of the 45 degree inside...

Re: First shots at 1000 yards.... sounds like a good idea....I had a 20 MOA base put on it and thought maybe I should look at a 30 MOA, but $150 for a base seems to be a little much. Thanks..

Re: Free Ballistic software? If you use an Android smart phone, look up "shooter".....really good program.