Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Re: .223 AR-15 reloading dies and process Thanks again guys for all the information. I think I'll give the pacesetter dies a shot. I'm kind of curious about Lee's claims that the factory crimp die can produce results similar to seating right off the lands. I know when I started doing that...
First off, sorry if this subject has been tackled before, I tried searching for it and couldn't really find anything. I'm looking at dies to reload for my AR. It has a .223 Wylde chamber if that makes any difference. I've reloaded for my .308 for quite awhile now and if money wasn't an issue I'd...
Re: Need GPS Recommendation I just got a Garmin Legend HCX at Cabelas for black Friday. I found free maps at http://www.gpsfiledepot.com/ and got a map that shows land ownership and another topo map that shows public lands. Once you figure out how to transfer the data back and forth between...
Re: camo gun wrap If your not worried about a specific pattern you can use vet wrap or self sticking first aid bandages. I like the white for in winter and I use the tan out here in the prairie.
Re: 175 SMK -VS- Coyote <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: typhoon186</div><div class="ubbcode-body">what would be a better .308 bullet for Coyotes? </div></div> If your wanting knockdown power I would say do not even try the SMK's. I've shot coyotes...
Re: 175 SMK -VS- Coyote <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bub</div><div class="ubbcode-body">That's a nice dog. Pretty good shot at that distance too. </div></div> Thanks, I was a little disappointed that I hit her in the shoulder first, I just got...
I just thought some of you might find this as interesting as I did. I recently shot a coyote at ~425yds with my .308. I actually shot it twice, first shot hit the shoulder and then after it quit jumping around I made a better shot into the vitals to drop it for good. This picture shows the...
I am in the middle of rebuilding my data book and I want to switch over to using DA. I was going to use JBM as highlighted here http://www.arcanamavens.com/LBSFiles/Shooting/Downloads/DA/ but I see it doesn't compensate for your change in velocity because of a change in temp. Since in Montana we...
Re: Harris adapter necessary for medalist a2? I've never needed one on mine, but I would recommend a think piece of foam cut out and placed between the bipod and the stock because the bipod will rub a little.
Re: Hand loading for Long range 1: brass case prep <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 707electrician</div><div class="ubbcode-body">I have a question. Once I have my headspace measurement from my once fired brass, how do I set my neck sizing die to...
Re: Sray Lube Question I thought the purpose of the spray lubes was to lay down a coat of it on the pads, and then roll the brass across so you don't get any on the neck, therefore avoiding oil dents. I also spray a plastic bore brush with it and run that in and out of the neck a couple times...