Search results

Re: .223 AR-15 reloading dies and process Thanks again guys for all the information. I think I'll give the pacesetter dies a shot. I'm kind of curious about Lee's claims that the factory crimp die can produce results similar to seating right off the lands. I know when I started doing that...

Re: .223 AR-15 reloading dies and process I'll look around for one and see how that works, thanks for the heads up.

Re: Phantom Finishing Mc Reese Stock with USO Awesome rifle! Do you know what colors were used?

Re: .223 AR-15 reloading dies and process <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Scooter-PIE</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Shocktroop0351</div><div class="ubbcode-body">Thanks...

Re: .223 AR-15 reloading dies and process Thanks guys for all the good info. Would a primer pocket uniformer be an effective way to remove the crimps?

First off, sorry if this subject has been tackled before, I tried searching for it and couldn't really find anything. I'm looking at dies to reload for my AR. It has a .223 Wylde chamber if that makes any difference. I've reloaded for my .308 for quite awhile now and if money wasn't an issue I'd...

Re: Need GPS Recommendation I just got a Garmin Legend HCX at Cabelas for black Friday. I found free maps at http://www.gpsfiledepot.com/ and got a map that shows land ownership and another topo map that shows public lands. Once you figure out how to transfer the data back and forth between...

Re: camo gun wrap If your not worried about a specific pattern you can use vet wrap or self sticking first aid bandages. I like the white for in winter and I use the tan out here in the prairie.

Re: 175 SMK -VS- Coyote <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: typhoon186</div><div class="ubbcode-body">what would be a better .308 bullet for Coyotes? </div></div> If your wanting knockdown power I would say do not even try the SMK's. I've shot coyotes...

Re: 175 SMK -VS- Coyote <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bub</div><div class="ubbcode-body">That's a nice dog. Pretty good shot at that distance too. </div></div> Thanks, I was a little disappointed that I hit her in the shoulder first, I just got...

I just thought some of you might find this as interesting as I did. I recently shot a coyote at ~425yds with my .308. I actually shot it twice, first shot hit the shoulder and then after it quit jumping around I made a better shot into the vitals to drop it for good. This picture shows the...

I am in the middle of rebuilding my data book and I want to switch over to using DA. I was going to use JBM as highlighted here http://www.arcanamavens.com/LBSFiles/Shooting/Downloads/DA/ but I see it doesn't compensate for your change in velocity because of a change in temp. Since in Montana we...

Re: Harris adapter necessary for medalist a2? I've never needed one on mine, but I would recommend a think piece of foam cut out and placed between the bipod and the stock because the bipod will rub a little.

Re: Hand loading for Long range 1: brass case prep <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 707electrician</div><div class="ubbcode-body">I have a question. Once I have my headspace measurement from my once fired brass, how do I set my neck sizing die to...

Re: Sray Lube Question I thought the purpose of the spray lubes was to lay down a coat of it on the pads, and then roll the brass across so you don't get any on the neck, therefore avoiding oil dents. I also spray a plastic bore brush with it and run that in and out of the neck a couple times...

Re: Problems with Redding Competition Seater I just got done loading another 37 rounds using palmiks and nessals suggestions and of the 37 all of them ended up being within +-.001" and I was able to do it in around 40 min and I didn't have to disassemble half of my bullets because they were...

Re: Problems with Redding Competition Seater My load isn't compressed any. I'm only running 43gns IMR4064 and trying to seat to 2.350". I do believe majority of my problem was with my seating technique. I never realized the ram would flex if I put any pressure on it. After I quit doing that...

Re: Problems with Redding Competition Seater <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nessal</div><div class="ubbcode-body">Your press does not cam over so your measurements will vary depending on how much force you put into the handle. What I do on the Lee...

Re: Problems with Redding Competition Seater <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: LawnMM</div><div class="ubbcode-body">Are you seating using the ogive but measuring COAL? I have an RCBS competition seater and it seats very consistently when I measure...

Re: Problems with Redding Competition Seater Nessal, Thanks for the advice on this. It's not that I rammed the handle down, but when I do get to the bottom I usually just press on it slightly to make sure it is bottomed out. I didn't realize the ram would flex. I'll go seat a few and see how...