Recent content by trappedinny

If you're interested in the 108 ELD-M's, I found similar luck as myates with a handload. Hornady Brass CCI 200 Primers 41.5 H100V 2.78 OAL 1 in 8 twist bolt

Ahh I see. Thanks Wyfox. They didn't have it attached in that photo. Here's a photo from Charlie Tarac's website for anyone else who's wondering

Maybe a stupid question, but how are they seeing past the barrel when looking through the scope at these ranges?? Edit: Maybe they're looking beside it from barrel twist, coriolis, etc.?

Sorry. I got nothing. I had a similar problem with my Timney, but turned out the trigger was set too low, and wasn't maintaining spring tension. Ensure that it's still doing it with the rifle aimed at the floor (so the trigger is in forward position even without spring tension). I had thought...

Very nice. I don't have room in my current house for a setup like that, but will be looking back at this once I'm in a new house

Is your trigger weight turned down very low?

That was on full bolt throw. I think I figured it out though. Think I had trigger weight a touch too low. There must not have been enough spring tension on the trigger. So when I put the bolt forward, with any sort of backward angle on the gun, the trigger was already "pulled" so it just rode...

Having issues with my Timney 517 flat blade trigger. I did the adjustments on my own after receiving the gun (bergara lrp with xlr element stock). Now the firing pin is coming forward when locking the bolt down, but only after being fired. If I set the safety when I re cock the gun, then put it...

This is a 2.4" group at 425 yards (0.56 MOA) 108 ELD's seated at 2.800" OAL Hornady Brass 41.5 gr H100V 26" with 1 in 8" - 6 Creed No chrono yet unfortunately, but in my experience, H100V is definitely worth a try for those of you looking to replace 4350

I've had good luck with mine. For the price, you can't go wrong. Especially at that Gander discount. Good way to start in single stage / rifle calibers Just don't forget shell holder, dies, all components. Other than that, I'm pretty sure it has all you need. I'm liking my Hornady Match Grade...

The guts of it seem to work. Hadn't had my new gun beyond 100 yards before today. Threw a steel gong out at 425, and the calculator put me dead on, despite a 6 mph wind at about 40 degrees. I still like the functionality; if they get the glitches worked out it will probably be my go-to, at least...

2.4" group at 425 yards 2.800" seating depth, 41.5 gr H100V Out of 26" barrel, 1 in 8" twist Hornady brass, Hornady 108 ELD, CCI 200

You're right - my 185 gr bullets were also dropped to 154.32. Maybe an app to come back to once the glitches are worked out. I don't see Hornady's 4DOF calculator - is that a mobile app or only on browser?

Shot targets top left, then top right, bottom left, bottom right, center in order of increasing powder levels between 40.4 and 41.8 gr of H100V. Saw no pressure signs throughout. Liked the level area between 41.2 and 41.6 (shots on bottom targets). Playing with different seating depths at 41.5...

Start time?