You are talking right thingsHello my Finnish friend.
I laughed a bit when I saw you struggling a little to open the box of primers one handed as you held the phone in your other hand. My first thought was you need to put those boys of yours to work as cameramen. lol.
Great SD (albeit on small set size) but how does that compare to SD your see with your process using other primers (and what other primers are available to you in Finland??).
And another point of interest to me is the consistency of their weight from primer to primer.
Thanks for posting this.
LOL....kids...you go to love them...except when you want to drown them with the kittens! hahaI should force the youngsters to do the filming, they do not want to do nothing, if i dont pay them.
Will they cause primer pocket problems if you switch back to CCIs will it cause lose primer pockets for other brands of primers?LOL....kids...you go to love them...except when you want to drown them with the kittens! haha
I knew we were being ripped off when it came to primers.For the US guys, don't waste your time on these. Once they are gone they are gone for good. They are shipping all of their primers to Aus and New Zealand as they can get 2x the commercial rice to the wholesalers there.
The only reason they are for sale here is WR broke their contract with Republic Reloading so they are just selling them all out till gone. WR tried to get all primers back from the people they sent them to so they could send them overseas.
Someone had CCI 400s the other day online for 69 per 1k. While that is still high it is trending down. Ginex at American relaoding also went from 339 for 5k to 309 for 5k.I knew we were being ripped off when it came to primers.
The prices haven't gone down at all since peak covid levels.
We still paying double that, no sign of prices dropping anytime soon.Someone had CCI 400s the other day online for 69 per 1k. While that is still high it is trending down. Ginex at American relaoding also went from 339 for 5k to 309 for 5k.
Yeah standard prices circa $230AUD/1000.
I wish we weren't regarded as a premium market. We get reamed on factory rifles too. US stuff is probably the worst. Because hornady match and precision hunter are the only widely available decent factory ammo you are close to $100 AUD box prices at a lot of shops for standard calibres, $10 more for common magnum cals. The good federal stuff really expensive if you can get it too. Winchester is cheaper but their modern brass seems to be rubbish and they seem to have headspace control issues with the brass too, multiple people with hard/no bolt close, clear chamber and bore in rifles that have run hundreds or hornady, sellier & bellot or other ammunition. I wish the creedmoor was 308 based as ADI would probably make brass and sell loaded ammunition.
I got lucky and bought a heap of 6.5prc precision hunter for less than most shops will sell 6.5 creed at bulk prices.
They don’t want us to have an ability to reload are own stuff here in middle America.That's nuts.
Someone had CCI 400s the other day online for 69 per 1k
I think that’s where I bought a 1000 to test. It was right at $140 to my door.