Search results

Search the forum Search Articles
  1. Macmathews

    Help with OCW

    normally these are really easy for me to read. target was levelled with a total of 33 + 1 shots. i noticed a little swipe on the second round at 45.4 grains. Temps are right at freezing here so I thought I'd shoot this faster. Anyhow , please advise how you would proceed. specs Ruger PR .308...
  2. Macmathews

    Need help deciphering my first OCW workup

    .003 ehh.. I seem to be about that variance between say 20 or so rounds. maybe closer to .002. Using a co-ax and forster ultra seating die. Kyle
  3. Macmathews

    Need help deciphering my first OCW workup

    I do further load testing .005" at a time and 5 shot groups. out to at least 300 , I actually prefer up to 600 Yards. IMO - shooting 100 Yard groups is sometimes hard to tell what load really shines over the next. This method requires more loads , but for me thats part of the fun.
  4. Macmathews

    Brass life with relation to expressed pressure signs

    I own a Rem 700 5R. in 308 that I have shot since 2012 and current best load is Lapua brass , 44.4 Grains Varget and 175 Grain SMK. I will get swipe just a few tenths about this charge. I recently bought a Ruger PR also in .308 and did some pressure testing up to 45.5 grains of Varget also...
  5. Macmathews

    Need help deciphering my first OCW workup

    I would choose 43.0 and fine tune seating depth
  6. Macmathews

    Video – 1000 yard 2.5 gallon water jug target

    Good for anybody.. Nevermind somebody in a wheelchair.. Congrats ! Kyle
  7. Macmathews

    IMO - Reading pressure can be difficult

    My rifle is a REM 700 5R in 308. To make a long story short My brass is Lapua... NEW load of choice is Lapua scenar 155's OVER 44.2 grains of XBR8202.. (IMR book max is 45.2) I can shoot most pieces without a trace of ejector swipe or sticky bolt.. And then get swipe on the case head...
  8. Macmathews

    178 Amax OCW Results

    At what yardage are you checking groups ? Kyle
  9. Macmathews

    Lapua .308 brass

    Currently at 5x with about 300 pieces of brass. These are with 44.4 grains varget and 175smk
  10. Macmathews

    700 P 300 Win Mag

    What a hammer !
  11. Macmathews

    Hearing protection

    I tried a buddies Sordins over the weekend.. They seemed nice and I was even able to hear 1000 Yard hits on 12x12" steel .. that had to be the best part. that and I can still have a conversation while everybody is shooting around me and am not afraid to get caught with my plugs out :) Kyle
  12. Macmathews

    Long Range shooting in CANADA

    A bunch of us annually go to my hunt camp and shoot from a good elevation out to whatever distance we want.. prolly get about 3000 Yards.. .. But have only shot to 1200 Yards. See attached pics 1 snap is from 1200 yard balloon looking back to camp other is a couple of shooters and spotters...
  13. Macmathews

    Rifle Scopes Scope advice for a savage 6.5 creedmoor

    Watch for the super sniper 5-20 HD. You can pick them up used here for around that.. Especially the non-illum version.. Kyle
  14. Macmathews

    6.5 Creedmoor. Max distance.

    Can you give some details about your 6.5 .. Action ? Stock ? busting clays at 850. Wowza Thank
  15. Macmathews

    Need help with 178gr A-Max load

    And i believe I get 2660 out of 44.4 and 175 smks Kyle
  16. Macmathews

    ocw Lost on this one

    My 700 308 in 5r End up with nodes about 4 percent apart
  17. Macmathews

    Need help with 178gr A-Max load

    I have good luck with varget 44.4., lapua brass and 175/178 Kyle
  18. Macmathews

    Rifle Scopes Scope suggestions for my rem. 700 5r mil-spec .308

    Everybody in their right mind uses a rangefinder.. The advantage of an Ffp in a hunting situation is that your reticle hold overs are the same no matter what magnification the scope is on !
  19. Macmathews

    Neck Tension inconsitancy

    wow , A lot of good information.. Learning a TON here ! Hopefully will make me a better shooter ! Kyle
  20. Macmathews

    Rifle Scopes Schmidt & Bender "implosion"?

    Hey.. That was great.. thanks for spending the time ! Kyle
Top Bottom
Back
Home
Forums
Merch
Alerts