Search results

Search the forum Search Articles
  1. jeremybowlin

    removing moly from bullets

    Re: removing moly from bullets I used a crush walnut,corn cob mix it works really well on removing. I also run the brass/metal polish additive to get most all the shine back once it takes the moly off. works very well. Just takes some time to get them all most new looking.
  2. jeremybowlin

    removing moly from bullets

    Re: removing moly from bullets I have tumbled moly off many times in the tumbler. I got a batch of media just for it. takes about a day in a half to 2 days to get it all off. They shot just as good as naked bullets in the 243AI i had. could not tell any difference other then the naked bullets...
  3. jeremybowlin

    loading for the 7mm rem mag

    Re: loading for the 7mm rem mag H4350 is not the powder for mine. VOL sucked as did group size. I just got the rifle so i picked up a box of cheap remington 150gr sp ammo after i tried the H4350 loads. it shot the factory ammo 1 inch at 200 and i wasnt bearing down. So i now know the rifle...
  4. jeremybowlin

    Rifle Scopes $300 dollar scope

    Re: $300 dollar scope You made a good choice for the money its hard to beat nikon glass. You will be happy with it.
  5. jeremybowlin

    loading for the 7mm rem mag

    Re: loading for the 7mm rem mag I have found annealing helps a bunch. Now on the 7mm i ran into not enough neck tension the other night. using a FL rcbs die. I did remove the expander ball and will probally have to go that route. But i ended up using a drill and fine emory cloth and took the...
  6. jeremybowlin

    loading for the 7mm rem mag

    Re: loading for the 7mm rem mag Thanks chris for the info. Thats the reason i bought the sendero is to reach out there. I have a numer of the powders you listed so i will just run some lead down range as see what she dose. I love the berger bullets but they seem to be a pain in the butt to...
  7. jeremybowlin

    loading for the 7mm rem mag

    Im having a hard time deciding what powder to run for my 7mm rem mag. I have some test rounds loaded with H4350 140gr berger vlds. But i have been looking into H1000 also. what are you guys running with the 140vlds for the best accuracy/vol. Thanks
  8. jeremybowlin

    Rifle Scopes $300 dollar scope

    Re: $300 dollar scope For a cheap scope my vote is for the SS as well. I got a 16x SS on a rifle i traded for and its not to bad of scope. the turrets seem to have good positive adjustments. clarity is not to bad. There far from a good scope but the price is far from one as well. If its going...
  9. jeremybowlin

    Feedback Good Guy List

    Re: Good Guy List WHISPER308 i did a face to face deal with wisper308 and the deal went smooth as butter great guy to deal with.
  10. jeremybowlin

    Feedback Good Guy List

    Re: Good Guy List WILLYS46 Is a excellent stand up hide member as well. He to is as honest as they come. will darn sure do business with him again as well.
  11. jeremybowlin

    Feedback Good Guy List

    Re: Good Guy List OutLawTen5 is a excellent hide member to deal with. Very honest And a stand up guy. My money order i sent him had gotten lost. He was very patient and was going to hold the gun for me until i could get a reissue of the money order. The money order ended up showing up. Not...
  12. jeremybowlin

    Rifle Scopes Got a question about scope mounting

    Re: Got a question about scope mounting Cool deal thanks guys. I like them close and she is just that.
  13. jeremybowlin

    Rifle Scopes Got a question about scope mounting

    Hello i have a question on mounting a scope. I have a heavy barrel 6x284 that's fluted. Warren bases with Burris XTR rings 30mm with a NF 3.5-15x50. with the scope mounted I can see daylight between the barrel and scope bell. But i cant get a piece of note book paper threw it. Is this OK since i...
  14. jeremybowlin

    Winchester Large Rifle Primers

    Re: Winchester Large Rifle Primers I have noticed the same thing with the seating. The WLRs are a tad easier to seat the the federals. I have had excellent results with the WLRs. I have been playing around with the fed match lr and so far i have not been real impressed with them as i have...
  15. jeremybowlin

    Gunsmithing Got a question about bolt fluteing

    Re: Got a question about bolt fluteing Thanks guys for the fast response. I shall give him a call.
  16. jeremybowlin

    Gunsmithing Got a question about bolt fluteing

    Hello im sure i seen a fellow hide member whos a gunsmith that dose very nice work on fluting bolts. Anyone know who it was and about the rate they charge? I have a remmy 700 bolt i would like the spiral fluting done on. Thanks for your time. The guy i think im looking for had a bunch of...
  17. jeremybowlin

    does work hardening differ with hotter loads?

    Re: does work hardening differ with hotter loads? I have a ruger m77 target in 220swift. if i do not anneal after two firings groups open up to 2 plus inches. If i anneal and prep my brass 100% every-time the groups goes back to under 1/2 inch. This rifle is very picky on neck tension being...
  18. jeremybowlin

    Rifle Scopes USO advice.

    Re: USO advice. If it was my scope it would not of came off the rifle. No way in hellll am i doing that to mine.
  19. jeremybowlin

    how much variance when seating ?

    Re: how much variance when seating ? I agree the ring is from to much neck tension. Anneal the brass and you will see a heck of a difference in seating pressure. When you seat the bullet do they all feel like it takes the same amount of pressure to seat the bullet?
  20. jeremybowlin

    Rifle Scopes USO advice.

    Re: USO advice. They are great people at US optics. If you do go used and have an issue which i highly doubt there will be an issue they will take care of the problem for you. And another thing any one that has a 3000.00 scope they bought new the person is going to take care of it. So a used...
Top Bottom
Back
Home
Forums
Merch
Alerts