Search results

Search the forum Search Articles
  1. B

    Precision Rifles.....show em!!

    Nice rifle and cool photo I like it !!
  2. B

    Precision Rifles.....show em!!

    Now that is a nice set of rifles
  3. B

    Gunsmithing A Real Gunsmith Question

    You are 100% correct. Goatman !
  4. B

    Gunsmithing A Real Gunsmith Question

    Yes I agree with 300sniper Enya is Great!! But mostly I listen to Opera the only real music there is!!
  5. B

    Gunsmithing Cutting new threads

    I guess we will have to agree to disagree on the tap subject.And I have done barrels on actions that have not been trued up and many that have been trued,and I can not really prove if one is better or not,but I do in my own mind think it cant hurt to true things up. And like it has been said...
  6. B

    Gunsmithing Cutting new threads

    I agree with this statement. If the face of the action and the barrel shoulder are both cut 90 degree's to the bolt bore race way, then that is what gets things line up straight any way. The threads are just to hold it together. But the threads are still not lined up with every thing when they...
  7. B

    Gunsmithing Cutting new threads

    A .010" over sized tap will not correct the miss alignment of the threads in a action in relationship to the bolt bore race way. A single point tool must be used to correct a out of round or angled hole. And this includes the threads in a action. I know this might start a pissing contest but it...
  8. B

    Gunsmithing Lathe Chatter; using PTG action jig for tenon/chambering.

    I agree 100% with JJones75 there is nothing wrong with your fixture but it is to long to do what you are trying to do with it. All you need to do is run the chamber end on a live center. Make sure you cut a good 60 degree center in the end of the bore after you get your barrel dialed in before...
  9. B

    Gunsmithing Remington 700 bolt replacement PT&G fluted

    Re: Remington 700 bolt replacement PT&G fluted I would not remove any material from the rear of the lugs on the bolt, it will affect the way the extraction cam works on your new bolt. Their are better ways to do the job as has been posted allready.
  10. B

    Gunsmithing Weaver Style Screws In bulk

    Re: Weaver Style Screws In bulk MSC INDUSTRIAL ?
  11. B

    Gunsmithing New Mill Help Please

    Re: New Mill Help Please You could get a real nice Sharp mill for 8K to 10K and they are very good mills.
  12. B

    Gunsmithing Need a gas port opened up, recommend smith please.

    Re: Need a gas port opened up, recommend smith please. You could put the barrel in a vise to hold it,then put a cleaning rod or a alluminum rod that is close to the bore size in the barrel and leave it in the barrel while you ream out the hole.To ream the hole use a small hand held tap holder...
  13. B

    Gunsmithing release agent for bedding?

    Re: release agent for bedding? Take a look at www.mclube.com. Looks like it might work.I have always used Brownells release with good results.But it is getting a little pricey.I think I might give Mc lube a try.
  14. B

    Gunsmithing Grizzly or Bad Boys Blasters blast cabinet?

    Re: Grizzly or Bad Boys Blasters blast cabinet? I dont know about the two that you posted,but I have a TRINCO sold by MSC/J-L and it is one of the best on the market. It has very good lighting and a good dust colector and both are very important when you are blasting.Most blasters that I...
  15. B

    Gunsmithing PTG"s customer service is awesome!

    Re: PTG"s customer service is awesome! I have been buying reamers and other tooling from PTG for 12 years. There service has always been great for my little shop.There service has been a little slow the last few months.We are all very lucky to have a great company that does so much for us in...
Top Bottom
Back
Home
Forums
Merch
Alerts