Search results

Search the forum Search Articles
  1. peligro113

    Magnetospeed v2

    This is exactly what I do
  2. peligro113

    .223 range report

    Thanks everyone I love this rifle I find that I have put my AR's aside when I go to the range this rifle always comes with me. It shoots FGMM 69 grain, Vmax 40 reloads, and even my plinking 55 reloads very well. Sent from my Nexus 4 using Tapatalk 2
  3. peligro113

    .223 range report

    About a year ago I had Russell @ SSC build me a 223 bolt action but I wasn't able to write up a report on it since I was overseas due to my job. A week ago I started working up a load for it with some Nosler 2nds I picked up and some RL15. I also made up a sighter load to get me on target...
  4. peligro113

    .223 - 5.56

    Rem 700 Brux 20" 1/8 223 wylde chamber 77gr Nosler Custom competition 2nds seated to 2.260 RL15 22.5g, 2502 fps 23.0g, 2561 fps 23.5g, 2635 fps LC brass Tula SRM sighter shots only top left target on 1st target page 77gr Nosler Custom competition 2nds seated to 2.350 H335 22.2g, 2589 fps LC...
  5. peligro113

    Equipment Question

    measure from the ogive with Hornady comparator not the meplat because as you have seen you will have variances, I used a Challenger today to load some 69 and 168 smk's and the were all within .001-.002 of each other using the Hornady comparator. Is your load a compressed load? If it is you...
  6. peligro113

    Either a brilliant idea or a full retard idea. Which one is it?

    Isopropyl alcohol vapor is denser than air and is flammable with a combustible range between 2 and 12.7% in air. It should be kept away from heat and open flame. Isopropyl alcohol has also been reported to form peroxides, which may explode upon concentration
  7. peligro113

    Gunsmithing Remove Blockage from AR15 Gas Tube

    buy a new one for $10 save yourself the grief
  8. peligro113

    6.5 grendel OAL?

    Are you reloading for an AR or bolt gun? I just loaded some 123 SST's to 2.260" so they fit in a magazine, i don't have my load book with me at the moment so I cant tell you what the measurement with the comparator is. I was under the impression that you can't load long enough to touch the...
  9. peligro113

    6.5mm 123gr A-MAX... have they vanished??

    You can use the 123g SST, beggars can't be choosers.:) Super Shock Tip (SST) Bullets .264 Diameter 123 Grain $29.51
  10. peligro113

    Quick Answer Needed: Tula Small Rifle Primer KVB223

    I use their small rifle, large rifle, small pistol, and large pistol so far I've only had an issue with 2 small pistol primers not igniting out of over 500.
  11. peligro113

    MK262 clone 77Grain 5.56 load problems / updated OCW tests

    With Varget compression and crimps are your friend as you get into the higher charge weights.
  12. peligro113

    Keeping your powder dry!

    I just keep my powders in a closet in my house, I would never store powder in an ammo can or other strongly constructed object due to the gasses not be able to vent if the powder happens to catch fire possibly causing an explosion...has it happened i don't know but i don't take chances. here...
  13. peligro113

    Midway has 6.5 creedmor for 25$ on clearance

    Midwayusa's computer will automatically put items on clearance if they don't sell any for a certain time frame, it will continue to lower the price automatically until some purchases the item.
  14. peligro113

    want to duplicate m118lr load.

    I found this online but haven't tried any of the loads
  15. peligro113

    One More rifle lost by USPS

    you can ship via USPS to FFL's
  16. peligro113

    223/556 with IMR4198 or H4895 options

    I use 19.8 grains of IMR4198 with a 55 grain FMJ loaded to mid cannelure out of my AR15 with a 1/9 twist it delivers good accuracy...usually 1" or less at 100 yds. IMR4198 is usually used with lighter bullets in .223 caliber
  17. peligro113

    anyone try the archangel rem stock? or review?

    That thing looks like it weighs a ton
  18. peligro113

    Which powder for both 9MM and 40S&W?

    I use Accurate #2 for .380acp, 9mm, 40s&w, 38 spec, and .45acp
  19. peligro113

    LETS SEE your reloading setup

    They only powder and primers I have in my pics are the 4 or 5 I was actually using, my powders and primers are stored in the house, you'd probably shit a brick if you saw my powder and primer stores.:) Sent from my Nexus 4 using Tapatalk 2
  20. peligro113

    45 ACP Powder Choice

    I'll be the odd man out. I use 5.4g of Accurate #2 with my 230g RN lead OAL 1.230 cci primers I also use the same load for my 230g plated FP, OAL 1.230 cci primers in my 1911
Top Bottom
Back
Home
Forums
Merch
Alerts