• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Search results

Search the forum Search Articles
  1. D

    Gunsmithing Anyone use defiance machine actions?

    Re: Anyone use defiance machine actions? History repeats itself time & time again. Swing the bolt on a Barnard & you'll give those Phoenix/Defiance actions away.
  2. D

    Gunsmithing Curious- Rem 700 bolt's are three pieces?

    Re: Curious- Rem 700 bolt's are three pieces? The CM head is pinned(3/16" diameter) & induction brazed to the bolt body.
  3. D

    Gunsmithing 1998 PSS 40X Trigger Adjustment

    Re: 1998 PSS 40X Trigger Adjustment Pics are of a std/pre 2006 OEM Rem 700 trigger group not a 40X Repeater trigger group. If you need a you tube video- Seek professional assistance.
  4. D

    Gunsmithing 700 trigger pins

    Re: 700 trigger pins JP, 1/8" drill bit shanks cut to length. cut w/a hack saw,square/break ends. Dowel pins I don't recommended.
  5. D

    Gunsmithing 700 trigger pins

    Re: 700 trigger pins 1/8" oil hardened drill rod stock cut to length. Done.
  6. D

    Gunsmithing cleaning rod

    Re: cleaning rod Purchase a Bore Stix or Denny Ivy rod & don't look back.
  7. D

    Gunsmithing Reciever/Factory BM Problem

    Re: Reciever/Factory BM Problem Top pic is OEM Rem L/A feed rails for ADL/BDL mag box,bottom metal. Bottom pic is OEM Rem L/A DBM mag system.
  8. D

    I Can't Take It Anymore!!!

    Re: I Can't Take It Anymore!!! Whites in Spokane,WA-custom made to your foot!! $400+ but they'll outlast all others for years 'till rebuild. You can wear them for days on end & your feet feel like you just put them on. There's a reason Smoke Jumpers choose Whites Boots. All others...
  9. D

    Gunsmithing rem 700 bolt tear down problems

    Re: rem 700 bolt tear down problems Good choice on spring compression tool. With cross pin removed from firing pin/striker- Unthread the T handle compressing the spring. Unthread the shroud & f/pin assy from the tool. Drill clearance hole(3/16") in 2" thick piece of wood to insert f-pin...
  10. D

    Gunsmithing Where to get bolt handle repaired

    Re: Where to get bolt handle repaired If,the TactiKool modification was done right to begin with,it wouldn't be broken. The handle doesn't need more BASTARDIZING by adding screws in an attempt to hold the handle to the bolt body.
  11. D

    Gunsmithing New York gunsmith

    Re: New York gunsmith www.hcprecision.com Herb Coates Gouverneur,NY.
  12. D

    Gunsmithing Gunsmith might have fouled my Surefire Flash Hider

    Re: Gunsmith might have fouled my Surefire Flash Hider Rookie plumber experimenting with your equipment. Phosphate Coating leads to porosity that leads to excess PIGEON SHIT. Preparation is Elementary & Price Less!!
  13. D

    Gunsmithing Broken Firing Pin

    Re: Broken Firing Pin Typical aluminum shank aftermarket firing pin assy w/ claims to reduce lock time by 33%. B.S.
  14. D

    Gunsmithing Winchester 70 Safety blocking! Help!

    Re: Winchester 70 Safety blocking! Help! yes,you can field strip the bolt w/o the safety. Cheap un-tempered/hardened part(safety lever)is burred not allowing activation/use.
  15. D

    Gunsmithing BDL magazine spring in an ADL

    Re: BDL magazine spring in an ADL Negative- The springs will interchange, but they are not the same. The ADL spring bottom leg's tip is curled up aka ski/snowboard tip.
  16. D

    Gunsmithing 1911 Front sight staking options

    Re: 1911 Front sight staking options TIG weld the sight tenon to the slide for a seamless fit as mentioned above.
  17. D

    Gunsmithing 1911 Front sight staking options

    Re: 1911 Front sight staking options I don't stake the sight tenon,I make it seamless!
  18. D

    Gunsmithing Rem 700 bottom safety conversion?

    Re: Rem 700 bottom safety conversion? A double pivot bell crank lever will need to be fabricated as per a Jewell. Simply cutting/welding the existing lever to a bottom configuration will detent the lever in reverse. Lever to rear-Fire position. Lever forward-Safe position.
  19. D

    Gunsmithing Need a 700 style bolt handle

    Re: Need a 700 style bolt handle Remove the finger piece that is still attached to the bolt body w/ harmonics/vibration. Fixture & TIG weld the two pieces,blend,ready for install. Current production OEM Rem bolt handles with the exception of one, are short cam handles.
  20. D

    155gr semi-auto

    Re: 155gr semi-auto Commercial/Military brass of 165-175gr weight 42-43gr IMR4064 Fed 210 primer 2.820 OAL
Top Bottom
Back
Home
Forums
Merch
Alerts