Search results

Search the forum Search Articles
  1. E

    Range Report Twist vs Stabilizaton

    Thank you gents for the replys. I will see what the 208-210's will do.
  2. E

    Range Report Twist vs Stabilizaton

    I am considering moving to a 208 or 210 bullet in my .300WM. The barrel is a RC 11.25 and it hammers 190's. Will the 11.25 twist rate stabilize the 208-210 class bullets? I generally shoot from 850-1000. The only reason to move up is obviously for B/C and all round better exterior ballistics. I...
  3. E

    300WM - 26" enough? Hold out for 28"

    +1 for this ^^^^
  4. E

    Nobler vs Lapua vs Hornady Brass

    I too shoot Nosler brass, but in a straight .260. On my 9th firing and started loosing brass this week. I anneal every three firings and have NO cracked necks just primer pockets getting loose.
  5. E

    sanity check on 260rem/120amax

    I would not worry about the velocity, only pressure issues. By the burn rate chart I thought your charge weight was kind of HIGH. the Alliant site only recommends 40 grains of 2000MR with a 120 class bullet. If you have a book with your data in it it may be ok, but I have a feeling you are too...
  6. E

    Gunsmithing Winchester action work

    Looking for a smith to do some work on a Winchester action and rebarrel job. Any takers? Please shoot me a pm and I will fill in the gaps. Thanks for your time.
  7. E

    Vortex Diamondback spotter

    Primary use will be calling shots on paper and steel. Hunting where I do is limited on range, unless I'm on a road.
  8. E

    Vortex Diamondback spotter

    Anyone have any info on this spotter in the 20x60x60? In my price range for a spotter. Thanks for the input.
  9. E

    Carbon Solvent question

    Carb-Out made by the folks that make Wipe-Out works very well. It has a semi strong odor to it and is rough on wooden stock finihes, but it does work well.
  10. E

    Gunsmithing Lathe Damage, worth Concern or No?

    I am no where near as experienced as most smiths on this or any other site, but I do own some precision equipment. I would send that thing back and call the CC company for a charge back as most have said here. You paid hard earned money for NEW undamaged equipment PERIOD.
  11. E

    300 WM loose primer pocket

    I shoot that powder with 190's as well, but at 66.0 grains getting 3025 fps. The velocity is right as I used two chrono's and both read the same. I am on my seventh firing with WW cases. I'm gonna haul off and say your loads to hot for the brass and you likely have more loose pockets than you...
  12. E

    260 with Lapua Brass, H4831sc and Berger Hybrid 140's -- Anyone??

    I could not get the Bergers to shoot for me. I went with 142 SMK's. With h4831SC velocity was a tad slow, but overall the rifle shot well. I have never been able to get the velocities with 140's others have achieved so I moved on.
  13. E

    260 Rem in hunting applications?

    I run 123 AMAX out of my .260. It is a deer hammer. Out of ten kills only two moved more than 6 ft. Send a P.M and I'll give you my data if you want it.
  14. E

    Searching for CCI BR2 primers

    I back ordered some from Bruno's about four months ago. I had then inside two weeks. I guess a shipment came in shortly after I put them on BO.But, you can give them a shot.
  15. E

    Range Report .260 vs .300WM????

    I also shoot both. I have made good solid hits to 950 with my .260, but energy is lacking, splash is hard to see, but it shoots well. My .300 is a hammer with 190's and 208's. I shoot that just as often and at the same distances. I shoot both often. The .260 is cheaper to shoot. Both have their...
  16. E

    Chassis for Remington 700

    Robo1 & coach4christ, I have asked myself the same question "why" as the rifle is a hammer now. I guess I am like others on here and other places, I just can't leave well enuff alone! I am not 100% sold on the chassis system. Thanks for your responses.
  17. E

    Chassis for Remington 700

    I am considering switching my 300 WM to a chassis from a McMillian stock. I know nothing about a chassis system in terms of what is excellent, good or not worth having. Can some of you that run a chassis give me a run down on them and what I should look for? Expense will play a role to some...
  18. E

    210 Sierra Mk VS Berger 210's

    Yep, I just can't see why they are so much higher than the Bergers. It is what it is, but my gun loves them. I shot them out to 850 and they were dead nuts on and easy to tune too.
  19. E

    210 Sierra Mk VS Berger 210's

    Wildboarem, Sierra's in general are not overly expensive except when you get to the 210 MK which is considered a L/R specialty bullet, then the price goes up substantially. even at the 500 round price the 210 Sierra is 20-25 bucks more. The 50 round boxes are 38 and up in some places. I reckon...
  20. E

    210 Sierra Mk VS Berger 210's

    I recently shot some Sierra 210 MK's that absolutely rocked out of my 300 Win. But, the cost of that bullet is prohibitive when it comes to shooting 3-4 hours at a time. How difficult is it to get the 210 Bergers to shoot? I am not overly familiar with that bullet as I have always shot Sierras...
Top Bottom
Back
Home
Forums
Merch
Alerts