• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Search results

Search the forum Search Articles
  1. D

    moa at 1000yrds

    Re: moa at 1000yrds Work up some loads for your particular rifle. Keep the FPS at or above 2650 FPS and you should be fine. I hit mine with 178gr A-Max over 44gr Varget loaded to 0.02 off the lands. At a much higher elevation though. This load for my rifle was a .3MOA at 100 yrds and...
  2. D

    Remington 700 mount for Atlas bipod help?

    Re: Remington 700 mount for Atlas bipod help? Looks like the Seekins rail is the way to go.
  3. D

    Remington 700 mount for Atlas bipod help?

    Re: Remington 700 mount for Atlas bipod help? Thanks for the info. Now just trying to find one in stock somewhere. I am a Dealer, but been unable to get a hold of anyone there.
  4. D

    How to set how much to bump?

    Re: How to set how much to bump? I use the RCBS Precision Mic and it works fine.
  5. D

    Removing case lube after full length resizing? How

    Re: Removing case lube after full length resizing? How I tumble mine in cob for about an hour. I upgraded to the SS media method to clean cases, but kept my old Cabelas tumbler just for this process.
  6. D

    RCBS Charge Master

    Re: RCBS Charge Master I did the straw trick and reprogrammed it. Made a big difference. I can dispense 44gr of Varget in about 10-15 secs without touching it. I would say 1 out of 10 over throws. easy enough to take a couple granules out by hand until it is correct. Next I need a Giraud!
  7. D

    Fenix LD20 flash light.

    Re: Fenix LD20 flash light. We ran a GB for Fenix lights a few months back and the response was overwelming. I personally own a E05, TK15, TK41 and TK70 and all of them are awesome. They are definitely the best "bang for the buck" in flashlights.
  8. D

    Remington 700 mount for Atlas bipod help?

    I'm picking up myself a Atlas bipod and was wondering which mount you guys used on yours. If it matters, I have a B&C A2 stock.
  9. D

    AR trouble. Equipment failure?

    Re: AR trouble. Equipment failure? Getting much better groupings now with the 52gr SMK and 60gr V-Max. Looks like it just likes the lower grain bullets better and needed some breaking in.
  10. D

    Need assistance choosing a 223 bolt rifle

    Budget for only the rifle is roughly $600. Going to be strictly a bench/prone shooting rifle. I eventually plan on changing the trigger and stock. I will be handloading for it. I am already an owner of a R700 SPS-V 308 and like it a lot. just wondering what other opinions there are on other...
  11. D

    AR trouble. Equipment failure?

    Re: AR trouble. Equipment failure? I'll work around that 24.6gr TAC load to see if I can fine tune it a bit more. Got some 52gr SMK on the way and will try those next.
  12. D

    AR trouble. Equipment failure?

    Re: AR trouble. Equipment failure? Well now..... Hit the range today and shot some 60gr V-Max bullets over TAC. Here is what it did. I did 2x 5 shot groups for each load. The measurements are the avg of the 2 groups. Rested on a bipod and rear bag. All shots were taken at 100 yrds...
  13. D

    AR trouble. Equipment failure?

    I have now taken this to the range a couple times now. I cannot find a load that my rifle likes. I'm just trying to now see if something is wrong with the rifle. Before I call RRA, some opinions will be helpful. Rifle in question RRA Predator Pursuit 20" 1:8 Primary Arms 4-16x44 scope on a...
  14. D

    requesting help. case stuck in resizing die..

    Re: requesting help. case stuck in resizing die.. Used the Redding stuck case remover when I had a stuck 308. Drill, tap, screw. No more stuck case.
  15. D

    My worst day yet of reloading, feel free to share

    Re: My worst day yet of reloading, feel free to share Just cracked open my new bottle of AR-Comp. Was pouring it into the chargemaster and forgot to close the drain!!!!!!!!!!! This was after prepping 200 308 and 200 223 cases and my hands were hurting. Figured I would call it a day...
  16. D

    Micrometer type dies

    Re: Micrometer type dies I have a Redding for 308 and Forster for 223. Both work great, but the Forster was a little cheaper. I would buy either again.
  17. D

    Progressive Press

    Re: Progressive Press <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: avidflyer</div><div class="ubbcode-body">well just got back from picking up the lnl. got it for 379. </div></div> Good choice and excellent price.
  18. D

    Got my progressive BUT what dies

    Re: Got my progressive BUT what dies I use the Lee Deluxe 4 die set in 9mm on the LNL AP and they work fine.
  19. D

    Using Hornady 178gr. Amax in place of Sierra 175gr

    Re: Using Hornady 178gr. Amax in place of Sierra 175gr I use the same load for mine.
  20. D

    AR Comp and Pro 2000 MR Range Report

    Re: AR Comp and Pro 2000 MR Range Report Thanks for the link. I know what you mean now. No ejector marks so far
Top Bottom
Back
Home
Forums
Merch
Alerts