Search results

Search the forum Search Articles
  1. A

    Rifle Scopes Any reviews on the Bushnell Elite 2.5-16X42?

    Re: Any reviews on the Bushnell Elite 2.5-16X42? Mate I have this scope on my Air rifle. It is ok, on the lower end of magnification it becomes a little distorted with fisheye lens look but fine on higher end. It works great, turrets are nice, reticle is good, return to zero is perfect. I...
  2. A

    Why shouldn't I get a .243?

    Re: Why shouldn't I get a .243? I went 6mmSLR. You should look into it as I am very glad I went that route. 105 Bergers at 3070fps with no pressure at all, shoots great. Barrel life, I am certain it will go over 2k, using slow powders is the key! I like the longer neck. Link to my rifle...
  3. A

    6mmSLR from Oz

    Re: 6mmSLR from Oz Update on the 6mmSLR! Was shooting a load I found off the net of 43.5 grains of H4831sc. Put over chrony and found it to be only 2940fps. A bit slow for my liking. I loaded up a few rounds and went in 0.3 amounts to 46 grains, and shot over chrony whislt doing a ladder...
  4. A

    Gunsmithing The Patient is an AI AW chambered 300 Win Mag

    Re: The Patient is an AI AW chambered 300 Win Mag So this just started happening.... has to be something in the chamber surely.....
  5. A

    Tikka T3 Lite in 30-06? Need quick opinions

    Re: Tikka T3 Lite in 30-06? Need quick opinions I've got one in 30-06. Very satisfied with the performance of the rifle. It is just my hunting rifle, and buying off the shelf ammo for it. Federal ammo loaded with 180 Accubonds. Rifle shoots under a inch, more around the 0.75" area.... but off...
  6. A

    Rifle Scopes New Leupold 3-9x40 VX-R Patrol

    Re: New Leupold 3-9x40 VX-R Patrol I also have one of these scopes. For the money I am impressed. Mine sits on a Tikka Lite Stainless in 30-06. The scope is small, light, has good eye relief, and the illumination is daytime bright. The scope clicks are a little mushy, but for the price I...
  7. A

    6mmSLR from Oz

    Being a big 6mm fan this lastest rifle came after a bit of research. I wanted a case that could push the 115 VLD's if I ever wanted, have the capacity, but also work well for OAL in the mag. The 6X47L was an option, but I liked the simplicity of using 243 brass. Either option had to be run...
  8. A

    Rifle Scopes Vortex 2.5-10x44 PST v Leupold 3-9x40 VX-R Patrol

    Re: Vortex 2.5-10x44 PST v Leupold 3-9x40 VX-R Patrol I am waiting on a VX-R 3-9X40. I looked at all different scopes but after some consideration I opted for it. I like the small size plus the lower profile turrets. The rifle is a Tikka T3 stainless Lite in 30-06. This rifle will be going...
  9. A

    Gunsmithing Help with DBM install in a McMillan

    Re: Help with DBM install in a McMillan Well, got my AtlasWorx DBM insalled and running perfect using th Alpha Type2 mags. Mine is into a LTR HS Precision stock. The DBM does not sit flush with bottom of stock, slightly in as it was not deep enough. I also had to slot the feed ramp a very...
  10. A

    Gunsmithing Help with DBM install in a McMillan

    Re: Help with DBM install in a McMillan Well I attempted to install a AtlasWorx DBM into the Remington LTR today! Was hell..... I too had problems with the DBM not sitting high enough when having the DBM level with the underside of the stock so it was flush. My DBM came with the longer...
  11. A

    Flat Shooting caliber

    Re: Flat Shooting caliber You need to reload to take advantage of whats available. If you want flat, try 75Vmax out of a 6mmAI. With 14 twist Richard Franklin quotes 3800fps. Thats got to have very little drop out to 300. Quick look at JBM suggests 100m zero, 2.5MOA to 300m.
  12. A

    Rifle Scopes Sightron S3 or Vortex PST

    Re: Sightron S3 or Vortex PST Recently bought a SIII 3.5-10X44 mildot, milrads. In all honesty for the money, it is so hard to beat. The glass is fanastic, its well finished. Have a look in the "through the scope thread" to see it against the NXS and S&B. I bought this scope only due to...
  13. A

    Rifle Scopes See through scope picture thread.......

    Re: See through scope picture thread....... All on 10X... 1100m, lots of mirage! Sightron 3.5-10X44 SIII NXS 5.5-22X56 MLR S&B 3-12X50
  14. A

    Maggie’s Fellow Motorheads!

    Re: Fellow Motorheads! Mate Pretty cool looking car... will look for updates! Im rebuilding a Datsun P510 with SR20 turbo... sweet!
  15. A

    Sako TRG 22 260

    Re: Sako TRG 22 260 Alex = CHAMP!
  16. A

    Rifle Scopes New Schmidt 5-25 w/ Locking Turrets

    Re: New Schmidt 5-25 w/ Locking Turrets http://www.ebay.com/itm/Schmidt-Bender-S...=item2c5f9db9b1 I'm waiting for 3-20......
  17. A

    243 Win Loads

    Re: 243 Win Loads I am interested in what guys are getting out of the 243 with H1000 as well. I have a 6mmSLR coming(modified 243) and was planning on H1000 and 105Amax. Cheers
  18. A

    Rifle Scopes Sightron 3.5-10x44 Siii?

    Have a couple of questions for those in the know. With this scope what is the tunnelling like on the lower magnification? What is the Sightron illumination like? General concenus on this scope? I am wanting a scope for general allround use and like the FOV the 2.5-10' type scopes offer. Just...
  19. A

    Help with Redding seating micrometer VLD heads

    Re: Help with Redding seating micrometer VLD heads Quick test... are the VLDs seating off the ogive or the tip? If the VLDs are still seating off the ogive no need to change. Only change if the VLD is to slender and seating off the tip. Pull the seater apart, sit a VLD in the stem by hand...
  20. A

    Problems with Redding Competition Seater

    Re: Problems with Redding Competition Seater Mate The 175SMK's are pretty consistant, but measure the bearing surface of a few projectiles and see if they differ. When I have had issues with consistant seating, it was the bullets. Also, can you change the seating depth on how hard you push...
Top Bottom
Back
Home
Forums
Merch
Alerts