Search results

Search the forum Search Articles
  1. C

    243 AI 75gr V-Max load data

    Re: 243 AI 75gr V-Max load data samson, I shoot the 75gr V-Max in my 243AI for varmint hunting. I've tried W760, which is nearly identical to H414, and couldn't get great accuracy with it. I didn't run the entire range of charge weights, but focused on 47-48.5 gr, with the 48.5 load pushing...
  2. C

    Rifle Scopes Leupold rings on picatinny base?

    Re: Leupold rings on picatinny base? Thanks for the confirmation guys. Humble, the Warne rings look good, but I'm not sure I would like the design. Having to remove the entire ring from the base to get a scope off doesn't seem like a superior design. Since I have never used them, is...
  3. C

    Rifle Scopes Leupold rings on picatinny base?

    Do any of you guys know for certain if the Leupold QRW or PRW rings would fit on a Picatinny rail? Long story why I ask, but it basically involves giving me some flexibility to swap scopes between rifles.
  4. C

    IMR 4350 vs H4350

    Re: IMR 4350 vs H4350 Not sure if this has any relevance for you, but here is what I experienced in a custom 7-08. I started with IMR and moved to H for the following reasons: - I had a very accurate and stable load with IMR, however it was a bit slow even though I was near max charge. The...
  5. C

    Rifle Scopes Wonder Optics 4-14 x 50 or Super Sniper 10X

    Re: Wonder Optics 4-14 x 50 or Super Sniper 10X <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mr.rhtuner</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jpcowboy5</div><div class="ubbcode-body">Anyone...
  6. C

    44 Mag rifle load

    Re: 44 Mag rifle load For hotter loads using the heavy bullets, stick with H110 or W296. I just got done loading a bunch of rounds for my Blackhawk using the 240's and W296. Powder was clean burning and quite accurate. Be careful though, as there is only ~1gr difference from min to max on...
  7. C

    Rifle Scopes Very little mention of Mk4 4.5-14x50,Why??

    Re: Very little mention of Mk4 4.5-14x50,Why?? Great scope and very versatile with the TMR reticle. I use mine for both hunting and LR shooting and only once during a match was I wishing I had more power. If you are planning to use it for shooting small targets (e.g. prarie dogs at 600yds)...
  8. C

    RCBS Customer Service

    Re: RCBS Customer Service I did something similar with a RCBS sizing die. I didn't lube the case enough and ended up ripping the case apart near the case head. The rest was stuck in the die. I sent it to them and asked if they could remove the case and bill me for the work. They sent me a...
  9. C

    Gunsmithing Cerakote application questions

    Re: Cerakote application questions Rij, I'm going to use a HVLP gravity fed touch up gun that runs off a compressor. My brother has a really good one with several different nozzles that he uses for his antique cars. From my discussions with Greg, an airbrush can be used but it will take...
  10. C

    Gunsmithing Cerakote application questions

    Re: Cerakote application questions Thanks gents, especially to Greg for taking the time to have a call. This has been very helpful. I'm pretty sure that I'm going to go for the ambient cure Cerakote. I don't have an oven that can handle the entire barreled action and don't really feel like...
  11. C

    Gunsmithing Cerakote application questions

    Guys, I'm getting ready to shoot my barreled action with some Cerakote and had a couple questions before I jump right in. - I'm leaning towards the ambient cure version, but is it worth the extra hassle to go with the heat cure version? I'm not too concerned about waiting longer for it to...
    • craigp40
    • Thread
    • application cerakote questions
    • Replies: 20
    • Forum: The Armory
  12. C

    FYI: Chargemaster can be re-programmed + New Trick

    Re: FYI: Chargemaster can be re-programmed Great info. Now I just need to get my unit back from RCBS and I can try it...
  13. C

    7 Rem Mag - 7 WSM - 7-08

    Re: Loads for 7 Rem Mag-7 WSM-7-08 Taco, any further testing with the H380? I'm currently using IMR4350, but thinking about switching to get above 2800fps. Isn't H380 known to be temp sensitive?
  14. C

    Powder Dispenser, "The Best" Harrels or???

    Re: Powder Dispenser, "The Best" Harrels or??? At $1100, I'll pass and buy more powder. I'm sure it's a kickass system and extremely well built, but what good is measuring to within 1 particle of powder if you can't hold that margin of error on everything else? Besides, who can really see a...
  15. C

    7 Rem Mag - 7 WSM - 7-08

    Re: Loads for 7 Rem Mag Sorry, I should have specified. I was using H4831SC. Highest I went was 64.0 gr pushing the 175 SMK and got 2870 fps. Respectable, but RL-25 got me slightly over 3000 fps before I hit pressure.
  16. C

    7 Rem Mag - 7 WSM - 7-08

    Re: Loads for 7 Rem Mag I tried H4831 in my 7RM. Accuracy was good, but velocity sucked. I dropped it as an option pretty quickly.
  17. C

    7 Rem Mag - 7 WSM - 7-08

    Re: Loads for 7 Rem Mag Custom 7mm RM with 26" Broughton 1/9 twist barrel Win Brass CCI LRM Primers 175 SMK 67.5gr of RL25 Seated 0.012 off the lands 2965 fps Consistent 1/3 MOA load for me (often better)
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts