Search results

  1. M

    Rifle Scopes simmons review?

    Re: simmons review? Hi, I believe SWFA has the whitetail classic but it is not the wtc18. I think it is a wtc15. And yes, you are right. The WTC18 is a very good scope. Had one on my 40X for a while when working up some loads. Tracked very well and did whatever it was supposed to. The only...
  2. M

    Rifle Scopes scope correction

    Re: scope correction Switchblade, Thanks. Will try your method.
  3. M

    Rifle Scopes scope correction

    Re: scope correction Yes, I had bore sighted it first. Funny how it worked just by redoing it all over again. Might give it a try. Still thinking about trying the degree inserts if it don't straighten out a bit by doing it all over again. Do you see any reason why the inserts would not work...
  4. M

    Rifle Scopes scope correction

    Hello, I mounted a Bushnell 4200 6x24 last week and then finally fired it. This scope sits on a Sav. SS action with a Farrel one piece base. The scope was zeroed out at installation and found that it is very close right on at the Ela. position. But the windage does not leave me many clicks for...
  5. M

    Ballistic sites

    Hi, I was wondering if there are any internet sites that would give the velocity of a loaded round if all the info on this round was given. At one time I thought I heard something about "Quick Load". I cannot remember whether it was software or a ballistic site. Any help out there?
  6. M

    Modified case will not work

    Re: Modified case will not work A 5/16x36 tap can be had from Enco for 12.95.
  7. M

    New lapua brass dented...

    Re: New lapua brass dented... I guess I was lucky then to get 200 pcs that were not dented at all. But with being said, the brass is tighter than it really has to be it the neck area. I tried loading one round and found it very hard to seat the bul. I then pulled the bul. to check it out only...
  8. M

    Modified case will not work

    Re: Modified case will not work Hi all, I think I solved the problem. After hearing different ideas I thought hard on just what might work. I used the new modified case that was too large in the neck dia. to fit my .272 chamber and resized the neck with a .268 bushing. I then used 2 different...
  9. M

    Modified case will not work

    Hello,today I finally got started (with the very nice weather)to start thinking about reloading for a rifle that was put together through the winter months. It is a 6mmBR Norma. As I started to use my stoney point OAL case ga.,I found out that the case would not go all the way into the chamber...
  10. M

    Lake City 30-06 Match Brass

    Re: Lake City 30-06 Match Brass FWIW, the LC match brass A/O ammo do not have crimps.
  11. M

    Gunsmithing To polish a chamber

    Re: To polish a chamber Guy's, thanks for your comments. I will not do anything to the chamber. Sounds like it could be a mistake. I will leave it as is and shoot it first. Chances are that it will be just fine. When the gunsmith looked at it with a bore scope and did not say anything, he...
  12. M

    Gunsmithing To polish a chamber

    Re: To polish a chamber 858, when the gunsmith installed my brl., he did mention that the throat did look on the long side. And yes, he did use a bore scope. However, at the time, he did not mention anything about the chamber being or looking rough. Once I got back home is when I tried the...
  13. M

    Gunsmithing To polish a chamber

    Hello all, I had received my new select Shilen match brl. and the chamber looks a little rough. When I had put a dummy case in, it came out out with some tiny scratches on it. I would like to polish it, but have never done this work to a chamber before. What tools would I need to use and what...