Search results

Search the forum Search Articles
  1. 3

    Gunsmithing Rem 700 bolt question

    Re: Rem 700 bolt question Do that and maybe replace the cocking assembly on the firing pin? Just my two cents...........
  2. 3

    Gunsmithing Will AR15 tools work on an AR10?

    Was wondering if any of the AR15 vise blocks, barrel wrenches, etc will work on the AR10 setup?
  3. 3

    Bolt face erosion??

    Re: Bolt face erosion?? Frogman77: To actually answer your original question: a few blown primers usually won't do enough damage to the bolt face to cause problems.
  4. 3

    338LM Build Questions

    Re: 338LM Build Questions You don't have to pay any type of special excise tax for a complete build. You do have to pay local sales tax if it's purchased locally.
  5. 3

    Picking a new 338 LM powder

    Re: Picking a new 338 LM powder I have alot of loading for the 338 LM mag under my belt and will stand behind RX 25. It's worked in different rifles with different bullet combos.
  6. 3

    Need a Good Powder for 308/223

    Re: Need a Good Powder for 308/223 Go with N140 or W748 and you'll have no problems.
  7. 3

    Rem700 long action make a good 338 action???

    Re: Rem700 long action make a good 338 action??? Dave Tooley: Thanks for your response. The way people respond will tell you if they are newbs or pros, and you are definetly the latter. LOL, you really have been at this a while if you're concerned about the lack of common sense people tend...
  8. 3

    Gunsmithing Sentry Solutions ?

    Re: Sentry Solutions ? I use the moly bore coating made by SS and like it over any other moly bore coating on the market.
  9. 3

    Rem700 long action make a good 338 action???

    Re: Rem700 long action make a good 338 action??? I don't want to start any pissing contests or rain on anyone's parade but I've had no problems with my 700. It was built by Rumble Wepnz on a long action and was machined to reliably feed and extract using the Wyatt detachable mag setup. The...
  10. 3

    300 win mag primers

    Re: 300 win mag primers I used Fed 210 primers in my 300 Win Mag and Reloader 25 for years without a single problem. The coldest weather I've used them in was around 20 degrees.
  11. 3

    One Rifle ---need help from people who shoot

    Re: One Rifle ---need help from people who shoot M1A scout rifle will fit the bill for what you want. The only thing I'd suggest is get a good Smith Enterprise scope mount. If you keep your magnification at around 10x on the top end you'll be amazed at how versatile the rifle is. Acurracy out...
  12. 3

    ACTUAL 6.5x47 Lapua velocity data needed

    Re: ACTUAL 6.5x47 Lapua velocity data needed Thanks guys! This data is exactly what I was looking for!
  13. 3

    ACTUAL 6.5x47 Lapua velocity data needed

    Re: ACTUAL 6.5x47 Lapua velocity data needed Outstanding gentlemen! Please keep the info coming!
  14. 3

    Neck turning .338LM

    Re: Neck turning .338LM I have not done it yet. If I start getting brass that sucks I'll be turning the hell out of them.
  15. 3

    Reloading for .338 Lapua

    Re: Reloading for .338 Lapua Average cost for me is around $1.50. I've used Norma, Lapua and Hornady brass as well as a shitload of different bullets. I can't complian about the Hornady brass becuase it gives excellent accuracy, velocity uniformity and high number of reloads per case. I...
  16. 3

    ACTUAL 6.5x47 Lapua velocity data needed

    Re: ACTUAL 6.5x47 Lapua velocity data needed Wow, is that really it?! One guy?!?!?!?!?
  17. 3

    ACTUAL 6.5x47 Lapua velocity data needed

    Re: ACTUAL 6.5x47 Lapua velocity data needed Thanks for the info Jedi! I'll see if I can find anything on 6BR tonight. If anyone else has info, I'd like to see it!
  18. 3

    ACTUAL 6.5x47 Lapua velocity data needed

    I was hoping anyone out there with a 6.5x47 lapua could post velocities they have actually chrono'd themselves. I need this info to help me make educated decisions on my next build. The barrel length, bullet weight and type of powder used to get your velocity would be a big help!
  19. 3

    Barrel profile's and mfg's

    Re: Barrel profile's and mfg's I've always had excellent results with Shilen barrels. As for taper, I wouldn't go with anything larger than a #7 LV. Barrels heavier than this can make the rifle a pain to transport as well as screw the rifle's balance up.
  20. 3

    Which Caliber 308 or 300WM?

    Re: Which Caliber 308 or 300WM? 308 for all the reasons stated by everyone else.
Top Bottom
Back
Home
Forums
Merch
Alerts