Search results

Search the forum Search Articles
  1. 3

    Resize New Lapua Brass

    Re: Resize New Lapua Brass Yep, I full length size. It makes me sleep better at night.
  2. 3

    155gr load for M1A

    Re: 155gr load for M1A Win 748 and CCI #34 primers give excellent accuracy in my rifle.
  3. 3

    338 Lapua dies

    Re: 338 Lapua dies <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: superde</div><div class="ubbcode-body">Redding competition dies here as well. </div></div> Same here
  4. 3

    Gunsmithing S&W Revolver Hand Tension/Torsion Spring HELP!!

    Re: S&W Revolver Hand Tension/Torsion Spring HELP!! JC: Thanks for the info. I looked at what you said and figured out how to get it working. Thanks again, I really appreciate it!
  5. 3

    Fed 205M in stock at Bruno's

    Re: Fed 205M in stock at Bruno's <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bacarrat</div><div class="ubbcode-body">50 bucks per k, they can keep them. They are not that good. </div></div> Yep, not the greatest price. I do have a real need for them so I'll...
  6. 3

    Gunsmithing S&W Revolver Hand Tension/Torsion Spring HELP!!

    Re: S&W Revolver Hand Tension/Torsion Spring HELP!! Anybody?
  7. 3

    Fed 205M in stock at Bruno's

    Re: Fed 205M in stock at Bruno's Just placed an order. The website said they were still in stock when I placed the order a few minutes ago. We'll see.......
  8. 3

    Gunsmithing S&W Revolver Hand Tension/Torsion Spring HELP!!

    Re: S&W Revolver Hand Tension/Torsion Spring HELP!! Thanks guys, I just need to know how the spring is orientated/installed. I may do a trigger job later.
  9. 3

    Gunsmithing S&W Revolver Hand Tension/Torsion Spring HELP!!

    I have a S&W Airweight 442 and the hand tension/torsion spring broke. I got a new spring in but cannot figure out how it goes in the pistol. Any pictures or descriptive's would be greatly appreciated!!!
    • 308isgreat
    • Thread
    • hand revolver sandw spring tension or torsion
    • Replies: 7
    • Forum: The Armory
  10. 3

    Partial neck sizing

    Re: Partial neck sizing Yes, sizing only about 2/3 of the neck has improved accuracy in SOME of my rifles. Others I couldn't tell a diffence between sizing the entire next or partial sizing. It made a big ass difference in my PPC (for the better).
  11. 3

    Bullets were fine, now keyholing after 150 rounds?

    Re: Bullets were fine, now keyholing after 150 rounds? Yes, I've had this happen before. It's really pronounced in my 6ppc. It's a 1-14 twist and will not stabilize 69gr bullets below 75 degrees. I've experimented with this starting at 58 degrees. At this temp the bullets wouldn't hit the...
  12. 3

    Cry for help

    Re: Cry for help Did you have a significant temperature change when shooting at night compared to daytime?
  13. 3

    How do I get oal and headspace on an M1A?

    Re: How do I get oal and headspace on an M1A? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CVH</div><div class="ubbcode-body">Bill, I use a RCBS precision mic for measuring once fired cases and setting my full length sizing die. You could also use a Redding...
  14. 3

    What to do when the load your rifle loves sucks?

    Re: What to do when the load your rifle loves sucks? I'd go out and test your reduced loads. You never know until you try!
  15. 3

    What am i doing wrong guys?

    Re: What am i doing wrong guys? It may be just a bad batch of brass. If you have access to a gauge that will check neck wall thickness then give it a try.
  16. 3

    Load question for 308

    Re: Load question for 308 Sounds good, as long as high pressure is not an issue.
  17. 3

    FGMM Fire Formed brass issues.

    Re: FGMM Fire Formed brass issues. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: thumper49802</div><div class="ubbcode-body">here is a little other tid bit of info, when i was neck sizing the first few i dont think were lubed enough, they were a little tough...
  18. 3

    Tricks for keeping a .223 projectile straight

    Re: Tricks for keeping a .223 projectile straight Are the bullets flat base or boat-tail? BT's should sit in the case without a problem. If you're using flat base bullets I usually hold the bullet over the case neck as I run it all into the seater die. Once the bullet is up past where you can...
  19. 3

    Best .308 Win Dies.

    Re: Best .308 Win Dies. Redding is by far my first choice with RCBS dies coming in second. I've used just about every make of die and find these to be the best.
  20. 3

    Reload .338 LM

    Re: Reload .338 LM <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ranger1183</div><div class="ubbcode-body">no chrony data. My guess is that the 250 SMK's left the barrel around 2840 fps. Much <span style="font-weight: bold">slower</span> than I could have...
Top Bottom
Back
Home
Forums
Merch
Alerts