I have a S&W Airweight 442 and the hand tension/torsion spring broke. I got a new spring in but cannot figure out how it goes in the pistol. Any pictures or descriptive's would be greatly appreciated!!!
Gunsmithing S&W Revolver Hand Tension/Torsion Spring HELP!!
- Thread starter 308isgreat
- Start date
Re: S&W Revolver Hand Tension/Torsion Spring HELP!!
Best I could do on short notice.
http://www.urban-armory.com/diagrams/exploded.htm
Best I could do on short notice.
http://www.urban-armory.com/diagrams/exploded.htm
Re: S&W Revolver Hand Tension/Torsion Spring HELP!!
Jerry Miculek has an excellent DVD called Trigger Job.
It shows the complete disassembly, tune-up, and reassembly of the S&W trigger mechanism. I't will definitely answer your questions, teach you how to tune your trigger, and make you much more knowledgable about the function of your S&W revolver.
Jerry Miculek has an excellent DVD called Trigger Job.
It shows the complete disassembly, tune-up, and reassembly of the S&W trigger mechanism. I't will definitely answer your questions, teach you how to tune your trigger, and make you much more knowledgable about the function of your S&W revolver.
Re: S&W Revolver Hand Tension/Torsion Spring HELP!!
Thanks guys, I just need to know how the spring is orientated/installed. I may do a trigger job later.
Thanks guys, I just need to know how the spring is orientated/installed. I may do a trigger job later.
Re: S&W Revolver Hand Tension/Torsion Spring HELP!!
There is a small hole that one leg of the spring drops into. You then have to reach in with something and pull the other leg back as you insert the hand. That is the best I can do for you. I really suggest you get the Miculek DVD so you can watch him do it. This is definitely a case where seeing is best. Otherwise have a gunsmith do it. It is a quick job. Besides that if you are going to take the gun apart you may as well tune the trigger at the same time. You do not want to repeatedly disassemble these revolvers as parts loosen up every time you do.
There is a small hole that one leg of the spring drops into. You then have to reach in with something and pull the other leg back as you insert the hand. That is the best I can do for you. I really suggest you get the Miculek DVD so you can watch him do it. This is definitely a case where seeing is best. Otherwise have a gunsmith do it. It is a quick job. Besides that if you are going to take the gun apart you may as well tune the trigger at the same time. You do not want to repeatedly disassemble these revolvers as parts loosen up every time you do.
Re: S&W Revolver Hand Tension/Torsion Spring HELP!!
JC:
Thanks for the info. I looked at what you said and figured out how to get it working. Thanks again, I really appreciate it!
JC:
Thanks for the info. I looked at what you said and figured out how to get it working. Thanks again, I really appreciate it!
Similar threads
Sidearms & Scatterguns
Getting into wheel-guns: S&W 986 or 627 PC / V Comp?
