Search results

  1. wirehand

    Help with primer change on Dillon 550b

    Re: Help with primer change on Dillon 550b Have you tried leaving the primer tube loose(the two allen screws) until the shell plate is around the bar, and snugging the primer tube after? There is also a allen screw at the back of the primmer tube block, this only allows the primer bar to go...
  2. wirehand

    Suppressors Suppressor sound reduction by caliber/rifle

    Re: Suppressor sound reduction by caliber/rifle <object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/sCC_PxRWVI4"></param> <param name="wmode" value="transparent"></param> <embed src="http://www.youtube.com/v/sCC_PxRWVI4" type="application/x-shockwave-flash"...
  3. wirehand

    Perfect die depth

    Re: Perfect die depth Try just a little and then run it in the rifle. The idea is to size just enough to get an easy bolt closing. If it doesn't close easily then add a little more to the die. Don't forget the sizing lube either. I say all of this in respect to a bolt rifle, because the...
  4. wirehand

    Perfect die depth

    Re: Perfect die depth If you are full length sizing smoke shoulder of the cases with a lighter, and adjust the die down in small increments until it just starts wiping the soot of the neck. Getting a micrometer case guage helps also. When neck sizing, I have used a sharpe to color up the...
  5. wirehand

    Sidearms & Scatterguns Which "carry" handgun to choose

    Re: Which "carry" handgun to choose <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: afine</div><div class="ubbcode-body">I just don't like the idea of carrying the Glock because of the lack of safety. Should that be something to worry about? </div></div> It...
  6. wirehand

    Where to buy heavy fabric in multicam?

    Re: Where to buy heavy fabric in multicam? http://www.rockywoods.com/Welcome-to-Roc...-Fabric-MutiCam
  7. wirehand

    Range Report Need copy of ATRAG M/M manual

    Re: Need copy of ATRAG M/M manual Is it in here? http://www.horusvision.com/manuals.php
  8. wirehand

    Suppressors Need to find a reputable Class 3 dealer in west CO

    Re: Need to find a reputable Class 3 dealer in west CO I did a transfer, it was uneventful,easy,good comms. Others I know have no gripes. PJ is GTG.
  9. wirehand

    .22LR upper assembly

    Re: .22LR upper assembly Yup, The Tac Sol is ok. It has a few issues like no bolt hold open so after running this in drills I find myself grabing for the charging handle on the 5.56 upper. After about 100 rounds it gets dirty enough for more stoppages. Brand type and 22lr in itself is so...
  10. wirehand

    Suppressors Need to find a reputable Class 3 dealer in west CO

    Re: Need to find a reputable Class 3 dealer in west CO Arms Authority Rifle,CO. 970-625-1050
  11. wirehand

    Useless Modifications????

    Re: Useless Modifications???? You know what the best solution to all these issues are? Easy button Substitute a N4 reciever for about $100 savings. Also they can probably perm. attach a new MITER for you. Sell the current upper to apply funds. Done
  12. wirehand

    Gunsmithing Removing smoke smell from firearms

    Re: Removing smoke smell from firearms Some logical suggestions so far. I appreciate the feed back. The out gassing thing hasn't seemed to work as it has been in a garage for 10yrs., although it was probably worse in the beginning. I may use the Febreeze and Slip 2000 CK, but am a little...
  13. wirehand

    Gunsmithing Removing smoke smell from firearms

    Ok, I voluntered to clean up a friends rifle that was in his house when it burnt down. The rifle is unaffected, barring the smoke smell. I have I.G.'d the whole thing, but the smell of smoke persists. Break free is a No Go. Ultimatally used Hoppes figuring that is the strongest thing I care to...
  14. wirehand

    Sidearms & Scatterguns Good 22 pistol

    Re: Good 22 pistol <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: K_4c</div><div class="ubbcode-body">Different approach for ya buddy... Buy a glock 19 or 17 and purchase the advanced armament<span style="color: #FF0000"> Advantage Arms? </span>kit (.22...
  15. wirehand

    Electrical shock

    Re: Electrical shock Yeah, could be a step potential.
  16. wirehand

    Gunsmithing aics hinge removal

    Re: aics hinge removal The hinge assm. is held in by those screws, but the hardest part is that glue (like Devcon) holds the hinge blocks into the square tubes also. Heat the tubes at the part you want to remove and the screws will come out easier, keep the heat going and use a soft mallet...
  17. wirehand

    PLF Fail

    Re: PLF Fail That was a piss poor PLF. If he didn't have that camera on(Hollywood in effect)things according to Murphy would have gone alrirght.
  18. wirehand

    Getting prepared for a Tough Mudder event....

    Re: Getting prepared for a Tough Mudder event.... <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: copdoc</div><div class="ubbcode-body">Move to Telluride </div></div> Meh....definitely the tent.
  19. wirehand

    Where does everyone shoot in Colorado?

    Re: Where does everyone shoot in Colorado? RMGO range map
  20. wirehand

    Maggie’s Meth addict burns down 3500year old tree

    Re: Meth addict burns down 3500year old tree But the Liberal Tree Huggers say "Stop the war on drugs" What a conundrum