Search results

Search the forum Search Articles
  1. SAS_Sniper

    Redding Type S Full Size . 338 Lapua issue

    hello everyone, I recently bought a full size die type s .338 lapua, I set the whole as specified by redding, but I noticed that it leaves me these marks on the shoulder ... it almost seems as if the die has been worked badly . Has anyone else happened? tips? Thank s John
  2. SAS_Sniper

    Safran/ Vectronix Terrapin-X *** Update***

    it will be interesting to make a comparison on the field between terrapin and terrapin x ... the "original" terrapin ranging over 4500 meters (2.8 Miles) in ideal conditions.
  3. SAS_Sniper

    Rangefinder tripod

    I use cullman magnesit 522T.. leupy mk4 and terrapin on the top.. I like it...level included and rubber/clawes feet. https://www.cullmann.de/en/detail/id/magnesit-522t-cb51.html
  4. SAS_Sniper

    Accuracy International Picture Thread

    JP
  5. SAS_Sniper

    .408 Cheytac

    Hi THEIS i'll use clearwather bullets 419 grains https://www.clearwaterswissprecision.com/carello-spesa/ or windcut bullets 412 grains http://windcutbullets.com/home/61-conf-50pz-ogiva-t-cal-0408-412gr.html
  6. SAS_Sniper

    N570 load for 375 Cheytac report

    Hi 38 me too 'll use RS80 for 408CT..can u tell me some advice about reloading this caliber? I have 1-13 twist and 29" barrel lenght... Thanks
  7. SAS_Sniper

    Sig50 / Tac50 ?

    Thank u Theis!
  8. SAS_Sniper

    Sig50 / Tac50 ?

    Hi all.. can someone tell me how much lenght and diam. of a tac50 action? thx
  9. SAS_Sniper

    .408 Cheytac

    Hi all.. Checking to see if anyone has a recommended loads for 408 ct.. Mine 'll arrive in a few months. I'll use Peterson brass, 398 gr monolithic bullets , N560 (or N570 powder)....and what else....ahm....29" lothar walther barrel (1/13 twist rate).. Feel free to post your loads for your...
  10. SAS_Sniper

    338 Lapua Magnum

    Rem MLR customized ( krieger hv#17 ,27" 1/10 twist rate - trued action - mcmillan A5 stock - trigger match) 300 grains scenar Ruag brass (T) trimmed at 69 mm OAL 63,5 mm 94 gr RS80 Fed GM215 primer v0: 840 m/s.. No overpressure sign...(but ,if u try, stay safe and use 10% rule) outstanding...
  11. SAS_Sniper

    308/175 SMK Help?

    agree.. card with different temperature and DA out to 1200 mt, and u are ready.
  12. SAS_Sniper

    How far will your LRF go?

    vectronix terrapin..
  13. SAS_Sniper

    Accuracy International Pics

    Thank u :) . Paint job was done with Hydrographic/Watertransfer Printing on original OD skins, it's very resistant to water, sweat, etc.
  14. SAS_Sniper

    Best drag bags

    i was very happy with Eberlestock E2B.. sold for upgrade to G4
  15. SAS_Sniper

    Accuracy International Pics

    My english bitch:
  16. SAS_Sniper

    Rifle Scopes info on height rings

    Thank u Rob! Is aviable badger standard medium-hight..so should be fine... :)
  17. SAS_Sniper

    Rifle Scopes info on height rings

    Hello everyones, i would like to put a S&B 5-25x56 on my 338 LM. My choice is between TPS or badger, but i can't decide about height...Now i have a NXS 30 mm tube and badger "hight" rings (.414" measured from base of ring to bottom of scope tube),and my scope fit(same 56 mm objective). I have 20...
  18. SAS_Sniper

    AI AE Torque values

    Also AI England told me 10 Nm.
  19. SAS_Sniper

    AI AE MK II vs AE MK III

    i think safety conversion are wasted money: i use my mk II at the range,on the field and to hunt.... never needed 3 position safety... +1 avsfan. imho.
  20. SAS_Sniper

    AIAE In Love All Over Again...

    agree with u Frank,especially on pt. 3 my AE seems don't like 168 smk..but 170LB (with 43.5g N140) are giving me good results...
Top Bottom
Back
Home
Forums
Merch
Alerts