• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. jagged77

    question on crimped primer pockets

    Re: question on crimped primer pockets <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: attherange</div><div class="ubbcode-body">if you need to decrimp the primer pocket, it is not match brass, just ream or swage it and run it, if you want good match loads buy...
  2. jagged77

    Securing press to table without drilling

    Re: Securing press to table without drilling I mounted my Co-Ax onto a very large solid wood chopping board (counter sunk the press mounting bolt holes to allow it to sit flat onto a table). I can mount it pretty much anywhere with either C clamps or bolting into onto another surface. The set...
  3. jagged77

    F T/R Competition Shooting a .223 at 600 yards

    Re: Shooting a .223 at 600 yards I've used my 20" SPS Tact with 69 SMK's for 500 yard FTR and it's performed very well. I shoot this combo out to 900 yards and when the wind isn't too bad its bloody accurate.
  4. jagged77

    advise on skim bedding

    Re: advise on skim bedding Look up the tutorials both here and on the Accurate Shooter as someone above mentioned. I've done a HS Precision with Devcon and it came out really well. I only bedded around the front recoil lug and the rear tang - let the sides untouched. Worked really well and...
  5. jagged77

    243 to 1000????

    Re: 243 to 1000???? Even 90gr Scenars from a 1:10 barrel make it 1000 with good results. When I rebarrel I'll go with a fast twist for the heavies. Very impressed with the LR accuracy.
  6. jagged77

    Rifle Scopes Falcon Menace

    Re: Falcon Menace Yep they work just fine, I've had three and use them regularly out to 1000 yards with no issues - good repeatability and return to zero. Sure they're built to a price (knobs are a little mushy but I've had no issues with eye relief or adjusting paralax) and are quite heavy...
  7. jagged77

    De-burring outside of case necks

    Re: De-burring outside of case necks I think that putting pressure on the cutting head actually seems to chase a burr into the outside of the case neck. I find that an extremely light touch is required just to scrape the burr off. Remember you're not trying to get a chamfer like you would...
  8. jagged77

    260 Rem dies

    Re: 260 Rem dies Lee does make a .260 collet die, I have one. I use it in conjunction with the Redding body die. I also have the Forster F/L die set with micrometer seating die and to be honest the F/L die works every bit as well as body sizing then neck sizing.
  9. jagged77

    AICS Installation

    Re: AICS Installation SLO, I don't know where you've got your information but you couldn't be further from the truth. The barrel channel will easily accommodate the heaviest barrel off a R700 action with plenty of room to spare, so go ahead and order that 1.25" dia parallel contour. The only...
  10. jagged77

    Painting plastic skins??

    Re: Painting plastic skins?? I've used a white plastic primer straight onto the skins with no other prep work other than a degrease, then straight on with the Krylon followed by a couple of clear coats. The stocks taken some use and abuse and is holding up extremely well. Never going to be as...
  11. jagged77

    Anyone ever deprimed their finger?

    Re: Anyone ever deprimed their finger? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ledzep</div><div class="ubbcode-body">Never hurt myself on the reloading press, but I did pull this off re-assembling a Lee-Enfield bolt in a hurry. </div></div> That was...
  12. jagged77

    On 308 Remington Tactical, a work in progress

    Re: On 308 Remington Tactical, a work in progress Good write up Niles, I like what you've done with the stock rifle and clearly its a shooter! I've got an SPS tact in .308 too (as well as a .223) and almost gone down a similar route, however mine wears an AICS, rifle basix trigger and has...
  13. jagged77

    Made it out to 1200 yds

    Re: Made it out to 1200 yds Nice one! Good shooting and nice pics, the countryside looks fantastic and almost looks slightly English too! You'll have the same problem I have at LR - spotting shots. It takes an eagle eye and good follow through to spot any misses in grass. Its actually easier...
  14. jagged77

    What are you listening to RIGHT NOW?

    Re: What are you listening to RIGHT NOW? Usually something like Maiden, Rush, Alterbridge to play drums along to but tonight a bit of classical; Holst, The Planets - Mars the bringer of war. <object width="425" height="350"> <param name="movie"...
  15. jagged77

    priming tool suggestions for a newB

    Re: priming tool suggestions for a newB I'm a bit biased because I've never used any different but I think the RCBS models are pretty good. I started off with the standard shell holder and tray type but upgraded to the APS strip model - this will do everything from .22H up to .338LM with the...
  16. jagged77

    338 Lapua loads with 4831SC and 285 Hornady's ??

    Re: 338 Lapua loads with 4831SC and 285 Hornady's ?? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chiller</div><div class="ubbcode-body">does 4831 have the right burn rate? </div></div> It is on the fast side but will do the job, the load data seems sketchy to...
  17. jagged77

    belted magnum case

    Re: belted magnum case +1 on the Redding body die, I use it in conjunction with a Lee Collet die for the neck on my 300WM and it works out pretty well. I regularly check for thickness above the belt by sacrificing a case now and again plus paperclip method and have yet to see any excessive...
  18. jagged77

    2400 .44 Magnum

    Re: 2400 .44 Magnum H110 and 240's make a stout combination, I use 22.5 grains and its a real handful. For plinking I use lead 240 SWC's and 7.7 grains Unique.
  19. jagged77

    Rifle Scopes wierd thing with scope

    Re: wierd thing with scope <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bigchaza</div><div class="ubbcode-body">Its a two piece set so ill have a look and see im very sure its the short action version and ill check the ring alingment this arvo </div></div>...
  20. jagged77

    Rifle Scopes wierd thing with scope

    Re: wierd thing with scope Are you running a one piece base or two piece? If its a two piece ensure you've got the short action version rather than long action. Other than that check ring alignment.
Top Bottom
Back
Home
Forums
Merch
Alerts