• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Search results

Search the forum Search Articles
  1. bcrich

    Savage 338 Lapua Mag help!

    How much did you remove from the necks? Ill try anything.
  2. bcrich

    Shot my first .308 loads today

    When you full size your brass you are bumping the shoulders back.... For a bolt gun you should bump it no more than .002 to help the brass last longer but fed brass is pretty soft and doesn't have the capacity win, hornady brass does. You'll run into pressure issues quicker with fed brass if you...
  3. bcrich

    Savage 338 Lapua Mag help!

    Sorry to welcome you to the club! I had 4 stuck cases at the last match out of 40 rnds using the same components but 89.5g load. Looks like the extractor slips off the rim and leaves a burr where it slipped off. Maybe a beefier extractor if that even exists. So we are both screwed (you a little...
  4. bcrich

    175gr PULLS: Jacket deformation question

    I was shooting them out of a Shilen 1/10 with a Palma chamber maybe your 2 grove will like them.. Good luck if you wanna buy some hit me up ha!
  5. bcrich

    175gr PULLS: Jacket deformation question

    I have some with about the same pull marks! (Probably from the same dude!) and they suck in my 700! They don't fly straight and basically a waste of money because I can't make corrections to make good hits! Erratic trajectory not repeatable. I have 900 that I'm gonna use as blasting ammo for...
  6. bcrich

    Rifle Scopes 20 MOA Scope Base Prices

    Egw has served me well.... A few thousand rnds of 308 and no issues (yet, knock on wood)
  7. bcrich

    Berger Bullets makes me a WINNER.....

    Lucky dog! I've won bullets (certificates) at local matches but this is much easier ha! Awesome congrats!!
  8. bcrich

    Kinetic Bullet Puller for the 338 Lapua?

    Lyman magnum bullet puller for me too!
  9. bcrich

    .260 Remington reloading questions

    I'm in the same boat but I'm not even gonna try to make 260 brass from 308 too much work and nobody I know has been successful doing it to get advice from! So far I have the dies (lee) 140g Amaxs and Winchester brass 7mm-8 converted but no powder so far..gonna try my luck with H4831sc. Until I...
  10. bcrich

    Frustration! Lake city brass

    ^I agree with temp9 are you sure you bumped the shoulders enough? You might have to re-adjust your die to further bump it! I tried to resize mil brass without re-adjusting mine and while it was good for my win brass it wasn't for the mil machine gun shot brass. If you checked all that I'd go...
  11. bcrich

    Reloads sticking in rifle after firing

    I have the 110 fcp HS in 338lm and I have the same problem! Looks like the extractor just slips off the rim! I need to find an aftermarket beefier extractor with a claw just a hair longer to grab the rim better. My loads aren't hot either plus I had the same problem with factory ammo, at the...
  12. bcrich

    When is it time to discard Brass

    Rob, I asked about the shoulder bump only because if you bump them back no more than .002 the brass will last you alot longer but it doesn't affect the primer pocket only from case head seperation. What firearm are you shooting? Bolt or semi? In my semis I bump back shoulders .004 and .001-.002...
  13. bcrich

    When is it time to discard Brass

    How much are you bumping the shoulders? If you use Tula primers you'll feel that they fit nice and snug compared to Winchester because they are a Kunt hair bigger. I think I was getting 7 reloads from federal brass and 42g of varget with 168 projos.
  14. bcrich

    Range Report Grouping problem 338LM

    Werew, does Ross make a magnum brake or is it the same as the older 3 port brake with 3 holes on top? I've been wanting to change my 110 Fcp stock brake.... It's not very effective. I don't know why they just didn't keep them like the BA model!
  15. bcrich

    Using a Socket as a comparator tool

    I use a deprimed 40 cal case.
  16. bcrich

    March 2013 Las Vegas Precision Rifle Results

    Thanks Roy and crew, had a blast shooting thru the fence!
  17. bcrich

    Las Vegas Precision Tactical rifle match - March 2, 2013

    Thank you Sincityprecision for an awesome match things change month to month and that makes for an enjoyable match!
  18. bcrich

    Las Vegas Precision Tactical rifle match - March 2, 2013

    Ill be there.
  19. bcrich

    Expected Accuracy at 100 Yards?

    Re: Expected Accuracy at 100 Yards? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Greg Langelius *</div><div class="ubbcode-body">Kids have better eyes, and girl-kid have better eyes and better patience. Guy-kids are all about getting to the next shot, girl-kids...
  20. bcrich

    Feb 2013 Las Vegas Precision Tactical match

    Re: Feb 2013 Las Vegas Precision Tactical match I'm in.
Top Bottom
Back
Home
Forums
Merch
Alerts