Search results

Search the forum Search Articles
  1. M

    Rifle Scopes Good 1-4 tactical scope

    I like the idea of a scope that is almost (or is) 1 power at the low range and magnified at the upper range. Maybe even something like the IOR 1.5-8 So is there a good robust scope that is reliable, has tactical turrets that is available without having to spend $$$$ on a Premier etc? How...
  2. M

    Rifle Scopes IOR or ????

    Re: IOR or ???? I know that IOR has FFP in that power range. I have one on a gun.
  3. M

    .308 DPMS Barrel Profiles

    Re: .308 DPMS Barrel Profiles I was mainly thinking the weight reduction would be from re-profiling the barrel. Also, the current barrel IS fluted already so that helps some.
  4. M

    Rifle Scopes How Repeatable are Larue mounts

    Re: How Repeatable are Larue mounts What was the general drift of the thread that people got banned for? Will my idea work, or not? I need to be able to rely on the gun to 800 for torso shots.
  5. M

    .308 DPMS Barrel Profiles

    Re: .308 DPMS Barrel Profiles .9 in front of the gas block and 1" under the FF rail.
  6. M

    Fieldcraft M4 Suppresor on the gun or off?

    Re: M4 Suppresor on the gun or off? How many rounds can a DI gun go with a suppressor before it starts to choke from the extra fouling?
  7. M

    Rifle Scopes IOR or ????

    Re: IOR or ???? Is it worth the significant price jump to a Nightforce?
  8. M

    Reprofiling a Barrel?

    Re: Reprofiling a Barrel? It is a factory DPMS barrel. Any idea if it is button or cut? My guess is button.
  9. M

    Reprofiling a Barrel?

    Re: Reprofiling a Barrel? Who did the work?
  10. M

    Rifle Scopes How Repeatable are Larue mounts

    Re: How Repeatable are Larue mounts How far out have you shot that setup? I don't think I would be able to detect an issue within 50 yards but would see it out at longer ranges.
  11. M

    Reprofiling a Barrel?

    Does re-profiling a barrel reduce its accuracy by introducing additional stress into the metal or anything like that?
  12. M

    .308 DPMS Barrel Profiles

    I am trying to build an all around gun and I have a DPMS .308 with an 18" barrel and an IOR 2.5-10X42 scope on it. V-Tac forearm so it is free floating. It weighs 12 lbs unloaded. I would like to lighten it up and the barrel seems the easy target. I would like to go to 800 with it so I am...
  13. M

    Fieldcraft M4 Suppresor on the gun or off?

    Re: M4 Suppresor on the gun or off? By adding a can on a DI weapon how much sooner do you have to clean it before you run into reliability issues? It is on a good gun, BCM with Slip 2000. If I was going to run the gun with the suppressor on the majority of the time should I switch from a...
  14. M

    Rifle Scopes How Repeatable are Larue mounts

    I have a DPMS .308 that I am trying to decide how to scope it. I want something that is all around out to 800 with good capabilities up close as well. I know, it's a tall order. I was thinking of having a RDS and a tactical scope both in Larue mounts and switching them back and forth. How...
  15. M

    Rifle Scopes IOR or ????

    Please don't confuse this post with the other one I have for my .22 trainer. I can get an IOR 2.5-10X42 FFP Mil/Mil for about $1,100. Is there another scope in this price range I should look at instead?
  16. M

    Rifle Scopes Best Mil/Mil for .22

    Re: Best Mil/Mil for .22 I am not finding the Weaver on SWFA? Is there a list somewhere of Mil/Mils that cost less than 1K? For some reason I can't bring myself to trust a Weaver. Maybe I am an idiot.
  17. M

    Fieldcraft M4 Suppresor on the gun or off?

    Re: M4 Suppresor on the gun or off? M4-2000 is the can. Noting POI shifts isn't a big deal on a bolt gun because I could just dial in the change. Having to dial it in on a red dot or having to hold for it doesn't really thrill me. So my original questions were: Is it better to plan to...
  18. M

    Vectronix PLRF 10 is inconsistant

    Re: Vectronix PLRF 10 is inconsistant I will try it out at longer ranges and report back
  19. M

    Fieldcraft M4 Suppresor on the gun or off?

    I just zeroed my M4 w/out the can. Adding the can drops the zero 2". So is it better to zero with or without the can? My assumption would be to zero in the configuration you are most likely to use the most often. So, that brings up the question of is it better to usually have the can on or...
  20. M

    Vectronix PLRF 10 is inconsistant

    I have one and needed to range off 50 meters. I stood in the same place and ranged off the side of a truck and got readings that varied + or - 2 yards. That is a 4 yard spread. Does mine need to go back or is this expected? Kinda crazy for a unit that cost more than my recent heart transplant.
Top Bottom
Back
Home
Forums
Merch
Alerts