Search results

Search the forum Search Articles
  1. K

    Tikka T3 Picture Thread.

  2. K

    T3 in AICS for 700 SA, Finished! (Updated w/ new barreled action -180218)

    For a bottle of scotch, a friend of mine spent the better part of Friday night by the mill and lathe inletting my T3 LH in a AICS 2.0 He also made a custom stainless recoil lug to fit the modified chassis. Very happy with the result! Let's hope it's still a shooter. ;)
  3. K

    Sako Quad 22 parts

    Re: Sako Quad 22 parts Try this guy. I bought a quad extractor from him. Don't know if he ships internationally but might be worth a try. http://www.tommysvapenverkstad.se/Kontakt.aspx
  4. K

    Sako Quad feeding-problems

    Re: Sako Quad feeding-problems No, I live in Sweden so I guess Sako Sweden or whatever it's called is the next step. Just enoys me that I can't figure out whats wrong or how to fix it =/
  5. K

    Sako Quad feeding-problems

    Re: Sako Quad feeding-problems I'm getting nowhere with this. I've tried different extractor-springs to see if a different tension would solve the problem. No luck. Then I tried modifying the extractor itself and when I finally got the rounds to feed ok, the gap between the boltface and the...
  6. K

    Sako Quad feeding-problems

    I have some feeding issues with my quad. When chambering a round, the rim won't slide in under the extractor causing the bullet to enter the barrel at the wrong angle. Shaving off some lead. It seems there's too much spring-pressure on the extractor. When trying w/o a spring, it feeds just fine...
  7. K

    Sako Quad 10 Round Mag issues

    Re: Sako Quad 10 Round Mag issues Yes, and if you do mess it up, it's an ordinary spring you should be able to pick up in any hardware-store. =)
  8. K

    Sako Quad 10 Round Mag issues

    Re: Sako Quad 10 Round Mag issues <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: shoot4fun</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Beck</div><div class="ubbcode-body">I cut the spring a bit...
  9. K

    Sako Quad 10 Round Mag issues

    Re: Sako Quad 10 Round Mag issues I cut the spring a bit. Feeds fine with 10 rds loaded.
  10. K

    Modifying a HS stock *Pic. heavy* Updated

    Re: Modifying a HS stock *Pic. heavy* Good luck! Don't forget the pics when it's done.
  11. K

    Modifying a HS stock *Pic. heavy* Updated

    Re: Modifying a HS stock *Pic. heavy* It's done. For now anyway. =) Judges?
  12. K

    Modifying a HS stock *Pic. heavy* Updated

    Re: Modifying a HS stock *Pic. heavy* Yep, through the shell. Where I have my thumb I used a Dremel to cut a couple of centimeters into the core, all the way down to the aluminium frame. You can actually see a piece of it at the 'back' of the grip. I hope my laminate is strong enough so...
  13. K

    Modifying a HS stock *Pic. heavy* Updated

    Re: Modifying a HS stock *Pic. heavy* Yes, if I'm going to laminate something else I'll definitely get twill woven fabric. I had to sand it down and lay a new layer at 3 or 4 spots because I couldn't get the air out at the corners. But the store only had this fabric in stock so there wasn't...
  14. K

    Modifying a HS stock *Pic. heavy* Updated

    Re: Modifying a HS stock *Pic. heavy* Not everybody in Sweden works at SAAB AB... Face-peeling? =) I have an Eagle stock pack that will go on top.
  15. K

    Modifying a HS stock *Pic. heavy* Updated

    I've never liked the palmswell on my 700 VSF HS stock. Sanded it down about a year ago but wasn't totally satisfied. Thought about ordering a McMillan A5 but wasn't sure the grip would fit me 100%. So, why not modify the HS stock as close to the A5 as possible? Original stock: Made a...
View older results
Top Bottom
Back
Home
Forums
Merch
Alerts