Search results

Search the forum Search Articles
  1. flyfisherman246

    Mega Maten MML lengths

    Not sure where you got 14" on a rifle gas system from. We are talking length in front of the receiver. That rifle in the photo is the old megalithic receiver I believe. Does anyone have a picture of the MML 12" Maten handguard with a rifle length gas system?
  2. flyfisherman246

    Mega Maten MML lengths

    Does anyone with a 12 MML upper know if the handguard will butt up to the back of the gas block on a rifle length gas system or if there is a big gap with the gas tube exposed? Does anyone have any pictures?
  3. flyfisherman246

    Firearms V Seven Harbinger AR10 receiver set

    bump
  4. flyfisherman246

    Firearms V Seven Harbinger AR10 receiver set

    I have a brand new in the box V Seven Harbinger AR10 matching receiver set with an additional matching spare stripped upper. Perfect setup for multiple barrel lengths or calibers. $1050 shipped. (shipping from my FFL) BILLET 7075 T6 ALUMINUM (DPMS/SR25 TYPE) UPPER & LOWER RECEIVERS SUPPORTS...
  5. flyfisherman246

    GAP-10 Rear Takedown Pin Question

    Just curious, what happened to your pin? Never heard of a pin wearing out. Thanks
  6. flyfisherman246

    Who's shooting a 22 creedmoor or 6mm creedmoor ar10?

    Who's running an AR10 chambered in one of these cartidges and running long skinny heavy for caliber bullets. Especially the 105 berger hybrid and 110 smk. I know it's a known problem with most barrel extensions where these long skinny bullets don't ride up the feed ramp, but instead slide...
  7. flyfisherman246

    Gunsmithing Minimum AR barrel thickness

    Appreciate everyone's (almost everyone's) helpful input. I feel better about experimenting with taking some meat off barrels in the future. Thanks
  8. flyfisherman246

    Gunsmithing Minimum AR barrel thickness

    That would make since to me as well, not sure how pressure would be higher down the barrel. Appreciate your input and will read that article you posted. Thanks!!
  9. flyfisherman246

    Gunsmithing Minimum AR barrel thickness

    I’ve heard that somehow 6” from the chamber end is the location of max pressure.
  10. flyfisherman246

    Gunsmithing Minimum AR barrel thickness

    Because they don't fucking shoot!!! Ask me how I know!! hahaha
  11. flyfisherman246

    Gunsmithing Minimum AR barrel thickness

    I figured it had to be some sort of lawyer involvement type thing. That being said, for personal use I'm trying to figure out how to cut a little weight of these things. A .900" barrel up to a rifle length gas system turns into a pretty heavy rifle. So I ran some numbers base off of barrel...
  12. flyfisherman246

    Gunsmithing Minimum AR barrel thickness

    I wouldn't say I'm looking for a problem, I'm just trying to get a better understanding of the situation. I find it interesting how different the thickness requirements are between barrel manufacturers. There has to be something bartlein and kreiger know that would cause them to come up with...
  13. flyfisherman246

    Gunsmithing Minimum AR barrel thickness

    I see these pencil barrels and ultra lightweight ar15 and ar10 barrels available. They are around .750" from about 2.5" in front of the barrel extension to the gas block. I understand some of these are probably chrome moly and can handle the pressure with the thinner wall thickness. I have...
  14. flyfisherman246

    Night Vision Is the Pulsar DFA75 a viable unit or garbage?

    Researching for a buddy. Anyone use these?
  15. flyfisherman246

    AR10 barrel extension options

    What kind of extension was that?
  16. flyfisherman246

    LMT .308 MWS

    yes, but I need to scrap the factory barrel for the extension like on the MWS.
  17. flyfisherman246

    LMT .308 MWS

    Been busy spinning up Bartlein blanks into MWS barrels. Keep in mind some of these barrels weren't designed to be used in this rifle as can be seen with different colored cerakote. Ill attached some pictures showing a couple 14.5" .308 pin/weld jobs with mid length gas, 16" .308's with rifle...
  18. flyfisherman246

    Accessories WTB Noveske N6 receiver set

    Looking for an N6 receiver set. Thanks
  19. flyfisherman246

    Accessories Aero .308 Bolt

    I have one brand new Aero Precision .308 bolt $75 shipped Also have one that has been fired about 20 times $50 shipped.
  20. flyfisherman246

    GWOT Toters Of The Mk11 & 12 - C’mon In...

    Damn, that’s harsh!!! Hahaha
Top Bottom
Back
Home
Forums
Merch
Alerts