Search results

Search the forum Search Articles
  1. cwinner

    Internal case base separation!

    I got the video link working: let me know what you all think................
  2. cwinner

    Internal case base separation!

    I've been loading a long time and never seen anything like this.... once fired new Hornady brass in my 28 Nosler hunting rifle. I went to process the brass and felt/heard a clunking sound in the case. The video explains the rest..... anyone ever seen anything like this? I checked the rest of...
  3. cwinner

    Acceptable work or not?

    6 groove barrel? Cut or button rifled? Not sure what a smith can do to "fix" anything...... if you're worried about the cut marks remember they are magnified by your bore scope...... best way to smooth them out is to just shoot it, they'll be gone in a couple hundred rounds.
  4. cwinner

    Precision Rifle Gear Jewell Trigger Repair

    I've had them rebuilt numerous times..... last one was dropped while out of the stock and broken clean off..... they are real quick and very reasonable!
  5. cwinner

    Broken Vectronix Terrapin help

    I appreciate this old thread and contact info......I need to get a PLRF 15 repaired ( expecting to pay) and hopeful that I can get in contact with the right folks. Wish me luck!
  6. cwinner

    Vectronix plrf15 having problems

    Unfortunately I find myself in a similar situation...... dropped my 15's and need them serviced as something is rattling around inside.... I'm happy to pay for repair. Did you ever find any resolution?
  7. cwinner

    Gunsmithing Lathe selection

    The difference between a new grizzley and a used lathe is that they will deliver the grizzley! You will spend many hours and perhaps have to drive many miles to find a used lathe and have to pick it up and deliver yourself.... I crossed this bridge years ago and went with the new grizzley...
  8. cwinner

    Competition Dynamics, NRL Hunter, Team Match Selection help.

    The CD team safari would be an excellent choice, the format is well established and you will get an excellent field match experience, especially with a partner. These are a bit dated but what you see is what you'll get..... highly reccomended...
  9. cwinner

    TL3/shouldered pre-fit issue

    It sure could cause light strikes...... you could measure a fired case against the no go gauge to see how much out of spec it is..... its good it won't close in a field gauge so it's not likely to rupture a case but it will stretch the brass a bit more than it should. Don't know if this is...
  10. cwinner

    Anyone getting velocity numbers like this guy in a 25 Creed

    Early on I ran the 131's at 3050 using H4350 but found that load hard on brass so I've now backed down to 2,950.
  11. cwinner

    Which SA bolt faces can reliably handle SRPs?

    My experience is with the 6.5 SRP Lapua brass necked to .25 ..... over 5k rounds through an impact action with a couple thousand through an older defiance deviant with no issues. I've also run some through an older stiller TAC 30 with no issues so I'd think that any custom action would work...
  12. cwinner

    RRS Anvil 30 for glassing and shooting?

    Adding this on top if the anvil works great for glassing...... not a lot of extra weight and well worth the $$ https://www.reallyrightstuff.com/pc-lr
  13. cwinner

    loaded round chambering issue

    Glad you figured it out...... it takes more chamfer than you'd think.... I've seen it many times and have been bitten myself. I now run each case through my giraud trimmer every time...... I have also really reduced my wet tumbling time, usually no more than an hour before I anneal and I use...
  14. cwinner

    loaded round chambering issue

    Based on your base diameter of .468" I'd say you should be good to go and your neck diameter is fine..... my guess is still a slight peening of just the mouth of the case causing the issues.... I know you said you have chamfered the outs side neck diameter but sometimes it takes quite a bit...
  15. cwinner

    loaded round chambering issue

    Never said if your wet tumbling but case mouth peennng looks like your issue...... I've seen it numerous times. Give them a generous outside neck chamfer and I bet it solves your problem. Typically if you had swelled bases you would have a hitch when you open your bolt from a fired round and...
  16. cwinner

    Two Vets 55m vs Anvil-30

    Well hell, I saw this post and could not resist ..... all I can say is this pan head on top of the Anvil-30 is the shit! https://rrssoar.com/pc-lr/ Anybody need a brand new BH40 ball head for cheap? Lol....
  17. cwinner

    Autotrickler V4 vs RCBS Matchmaster

    Not sure what your question is but the smaller tube running slower in shorter increments will be more accurate....... the scale needs time to react in my experience.
  18. cwinner

    Autotrickler V4 vs RCBS Matchmaster

    I loaded these setting this evening and much better performance, I was messing with the wrong variables and trying to max the speed up to the target weight and not allowing the scale enough time to react to the dropping kernels...... what I noticed with both of the suggested settings in this...
  19. cwinner

    Autotrickler V4 vs RCBS Matchmaster

    Thank you for sharing these settings..... they are definitely a better ballpark that what I was messing with.... I programmed each unit the same and they are a bit different but both are now <20 seconds with weights pretty consistent. I'm hoping RCBS can help fine tune them a bit more and I can...
  20. cwinner

    Two Vets 55m vs Anvil-30

    You'll be fine..... if you find yourself wanting to glass you can easily but a ball head on top!
Top Bottom
Back
Home
Forums
Merch
Alerts