Search results

Vectronix Terrapin. Awesome ranging ability. Works in the worst of conditions. Built like a tank! ~Brett

I'll add my stick to the pile. ;) Its a Rem700 LTR with Holland Radial Brake threaded in 5/8-24 to match up with my ThunderBeast 30P-1 (not pictured). Has an AICS stock with black viper skins and the Victor Company flush cup and grippy cheek rest accessories and 1 2.5mm accustack. B&T...

I've done a test of only 10 shots quickly and it was good enough that I bought one. I don't have access to a 35p now or I'd do more testing. Sent from my HTC6500LVW using Tapatalk

I'd like to see more comparisons with this and the magnetospeed. After I did a comparison of a 10 shot string over a Pact XP I found that the Magnetospeed always read higher (but if you use ballistics calculators to match the data up based on the difference in measurement point) they were...

Go to McMasterCarr.com and search for "91290A360". That will get you an alloy steel version of what you're looking for. If you're more into stainless steel you can search for "92290A354" for 316 stainless or "91292A205" for 18-8 stainless.

The Accushot will fit your bill.

The atlas is just freakin awesome. Get the Atlas and make sure you get the tac cap at the same time too. Then get the spigot mount bipod at the same time! ;)

Somewhat tough one but if I had to vote I'd look around 23.7-24 grains.

Being able to get an accurate density altitude has been very valuable for me! I don't see spending the extra money for the applied ballistics version of the kestrel when I can get a beater phone and run the applied ballistics software on that and get bluetooth synchronization of the kestrel...

Yet another +1 on the MagnetoSpeed V2. Great product. Wouldn't be without mine!

I had a gun with 650 rounds through it with no issues at all. But after that point in time (at just over 1000 rounds) I have received one of the double fires. Pissed me off cause it ended up costing me a few points! Thanks for posting this Lowlight as this is how I ended up finding out about it.

I also have problems in fog with my terrapin. The best you can do is enable the feature that allows you to get multiple ranges and often the second or third reflections will give you a proper range. I just used this technique on Saturday to get a few ranges through fog and I was able to then...

Ok so to close the loop: I first removed the ejector and cleaned the hell out of it and replaced it with the Wolf extra strength spring. I cycled a few rounds and immediately decided that I didn't like the feel when closing the bolt on a live round. The bolt was just a bit harder to close and...

I'll echo the thankful appreciation yet again... Sent from my HTC6500LVW using Tapatalk 4

Just found the 8541 tactical video here: Remington 700 Failure to Eject - Extractor Failure Demonstration - YouTube Yes this is EXACTLY what is happening to me. I've ordered a bunch of drifts, all the pins that I could possibly lose, a new ejector, a new extractor, all new springs, and a bolt...

I'm quite a bit off of high pressure loads but my ejected rounds don't go very far at all. A pile forms quite close to me and I'd not mind at all if the pile was another 4 or 5 feet away. Think I'll go ahead and order some of these parts. ~Brett

I'm very fond of the P4F that I have in my S&B and have just grown to love it from many hours behind it.... However that being said the G2DMR and the EBR-2B look very attractive. ~Brett

Took a look at the windage knob and there are no brass dings. There are bumps and scrapes from riding in the car out of a case and just bumping on bunkers and stuff. As far as the malfunctions I do find they are more prevalent when I am trying to go faster. I'm not a methodical type. I've got...

They are processed by non essential employees. So yes the form 4 processing would stop. But its not going to be closed for long if it closes. I'd give em a week tops. But I doubt they'll even get close to that long.

my LTR w/ 20" barrel in an AICS stock hasn't hindered me for longer range shots. Just the other day at my class we got 4 rounds out of 6 on a 30" plate at 1200 in 13 mph winds. If it were longer the gun would be a lot more annoying to handle. ~Brett