Search results

Re: torque for remington 700 barrel <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Niles Coyote</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: gundoktr</div><div class="ubbcode-body"><div...

Re: scope base bedding <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Twitch2120</div><div class="ubbcode-body">I'm sure the topic has been beat to death but I have a specific question about my setup. I've placed my 20moa badger rail on my aac-sd. Torqued the...

Re: torque for remington 700 barrel <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Niles Coyote</div><div class="ubbcode-body">If you are using the factory supplied aluminum floor plate don’t go higher than 45 inch pounds or galling/cracking can occur. I...

Re: How to fix scope mount? I can make you a new one using the existing holes and some blank stock picatinny rail material. Email me if you are interested. [email protected]

Re: Barrel threaded 9/16x24- what flashhider? Where are you in MN? I am in the twin CIties and can make you one. email me if interested.

Re: Sako extractor installation.....scale of 1 to 10? About a 10 if he only does alternators and transmissions. Send it to someone who knows what he is doing.

Re: 300 win mag key holes A rule of thumb: the longer (heavier) a bullet, the faster the twist. If you are keyholing 150's, you need a new barrel.

Re: Bolt-action assembly Send me an email with your parts list and wants and I will give you a quote, Been doing this for over 25 years. I just completed a Lawton based 6BRX with a Krieger barrel for an F-Class shooter [email protected]

Re: Did I get an unfinished drop in Shilen Barrel? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jeffm</div><div class="ubbcode-body">My Kreiger Drop in A/R Barrel has the name stamped on it, It is covered the handguard, but I can remove it to prove to a buyer...

Re: Striped Rem 700 action screw? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JAAM12</div><div class="ubbcode-body">Hey guys I have a striped front screw on a Remington action (308 SA). Is it safe to shoot with only three mount screws holding the one piece...

Re: M70 Pre 64 Actions Here is one completed in January.

Re: M70 Pre 64 Actions I have done quite a number of rifles on those actions, email me with your desires; maybe we can work something out. Jim [email protected]

Re: Mauser question. Why not convert it to one of these?

Re: rem 700 bolt tear down problems One other thing, when re-assembling, make sure that the holes in the cocking piece and the firing pin line up correctly. They are not always drilled in the center and you maty have to rotate one or the other line the holes up.

Re: Setting back 22-250 barrel, how far? You say you trued up the action? If you did it correctly you would have had to re-cut the receiver threads to make up for the suspected loss of concentricity between the bolt raceway and the threads. If that be the case, then the old threads on the...

Re: Screwing on/off new barrel? Yo really could, but, it wouldn't work. DIfferent bolt face and headspace probably

Re: Cant get this internal threading tool set up! It should be at or slightly above center. It is designed to cut only on the leading edge when threading. If you plunge cut with it, the resulting chips will interfere with each other. Also, when threading internally, the compound should be...

Re: Need to refinish a S.S. 1911 frame to black Robar!

Re: scope base hole drilled off center? I find it hard to believe the smith was at fault. Even a dummy could drill out an existing hole to a bigger size and not have it out that far; the drill will follow the old hole and maybe run out a bit, but not that far.

Re: pre 64 bottom metal? How about some original stuff? Email [email protected]