Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I went down to the local discount store and bought a yoga mat. It was really cheap and makes lying in the rocks at the pit tolerable. It is bulky and wasn’t made for shooting so there is that....
Yes Sir tool maker for 15 years Bridgeport, lathe and all the tooling and measuring equipment I could need. I think it will work out great when i am done a year from now (lol) we will measure some DB’s....
What steps do I take to apply for a stamp for a DIY project? If someone has done this and can elaborate on the process they took to acquire all legal documentation to start a build, your help would be a great asset.
Re: Machinist question What is said above is the truth and nothing but the truth! But there is the option of plunge cuting which is a good way to rough out lage amounts of matl.
Re: Muzzle Break Timing The math provided above is your best choice for sure. If that does not work well for you you can also thread the brake on all the way see how much it needs to turn. Then back it off half way or so stoping the brake at the same position as it did when bottomed out and...
Re: Buying a bridgeport questions you can buy a rotary phase converter for 500 to 700 shipped and have enough hp to run the mill and a lathe at the same time. but to answer your ? grab the table on one side and push and pull on it if it moves much that is a good sign it has alot if use. now...
Re: wooden vise inserts/jaw protectors? I have alot difret sizes its all in sheet form all the way to 2"x4'x4' if you get me deminsions i can either make you some or send you the stock for you to make it its white delrin.
Re: installing a break on my 300 RUM? I drilled the holes in the top with a number 21 drill tap drill for a 10-32 i wanted enough down force to help with muzzle rise and i drilled a few extra figuring if it was to much i could always tap them and plug the holes with a set screw as needed i...