Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Re: 300 blackout cycling issue???? Ok. In case of further inquiry it seems the buffer tube on RRAs rifle has grooves which cause friction. This friction sucks for subs. Had to replace the buffer tube Plus a lot of oil Was required on the bolt. Hope this helps others out.
Re: 300 blackout cycling issue???? Alignment looked fine, best I could tell. Now on drilling, is that an easy enough DIY project or should I take it to an expert?
Re: 300 blackout cycling issue???? Bustin quote: In order not to over-gas the barrel with supersonic loads the barrels normally will not lock back shooting subsonic loads without a can. the port was either .106 or .110. If you want it to lock back without a can it could be over-gassed when...
Re: 300 blackout cycling issue???? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dr. Phil</div><div class="ubbcode-body">You will likely have to have the gas port enlarged. The issue you describe is pretty common with the CMMG 300 BLK barrels. Check out...
Ok here's what I got: 16" CMMG upper RRA lower 220gr Remington Match Standard buffer/spring Gemtech HVT threaded Round fires, ejects, but doesn't grab the next round. I tried removing buffer spring weights but that wasnt effective. What's next?
Re: opening 1500 range near Dallas "update" I have seen the plans for the range. Its going to be a badass place. Goose has some great ideas for the future. The tournaments are going to be great with the current design scheme. If you have the time and are in the area (can't beat the distance...
Re: Pmag issue I have several of the same Pmags. The only way they drop out of my lower is if they have a full 30 rounds in them. I bought them in 09, I think (as far as age goes). I will also try that sanding trick.
Does anyone know of a website that has Sig 556 accessories? More specifically grips? I have been unsuccessful in finding any aftermarket grips? Also , assuming that you may own one, have you heard of the KNS pin and how necessary of a replacement piece is it?
Re: Wyatt's Outdoors Det Magazine vs Badger Ordinance I put a Wyatt's DBM into a B&C A5. The bottom metal dropped right in place. However, the rounds would not properly eject from my rifle (not an issue with the ejector on the bolt) and it required two people to remove the mag from the mag...