• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Search results

Search the forum Search Articles
  1. M

    Lee collet die sizing issue solved

    I thought I would have got a like on what I did to the cap
  2. M

    Lee collet die sizing issue solved

    no. I drilled the recess deeper in the aluminum cap
  3. M

    Lee collet die sizing issue solved

    Adjusting the die to size enough
  4. M

    Lee collet die sizing issue solved

    Any one interested ?
  5. M

    Hornadys Concentricity Tool???

    A VLD stem alleviates bullet runout in a decent seater.
  6. M

    Hornadys Concentricity Tool???

    Latest up date on MY Hornady concentricity tool gauge to the guys here that want to improve thier tool. It's a really good tool if set up right and doesn't take much to improve it and is not needed for any other more expensive gauges out there. I had a friend make me a one piece neck spindle...
  7. M

    Hornadys Concentricity Tool???

    I'll leave you boys here, have fun.
  8. M

    Hornadys Concentricity Tool???

    any body with any sense who's been handloading, shooting long enough knows not to take any advice from guys like you.
  9. M

    Hornadys Concentricity Tool???

    there's more to it than what you think. You left us in the dark, but expect to throw our hands up and say you're right ??? This is why I stay away from these forums most of the time.
  10. M

    Hornadys Concentricity Tool???

    Too many variables involved for anyone here to make a validated assessment of your statement
  11. M

    Hornadys Concentricity Tool???

    I can relate to that.... mine are, but brass and bullets aren't all the same and checking them, I believe, is necessary
  12. M

    Hornadys Concentricity Tool???

    I recently upgraded my Hornady unit. A friend made new spindles to check the necks. The bullet spindles are fine. The back end of the neck spindles are a bit loose as well as the front end and the bushing by the black knob wasn't tight enough to maintain it being off center. I used some metal...
  13. M

    Frankford Arsenal M-press

    a chamber die supports the entire case, a Hornady seater only supports the neck.
  14. M

    Frankford Arsenal M-press

    Ummmm, get rid of that Hornady die, they are not the way to go. Get a Forster or Redding seater, they will give plenty of room. Hornady is not a chamber die and leave too much run out.
  15. M

    Redfield Accutrak elevation dial velocity chart

    I have a Redfield commercial version Accutrak with the short elevation turret. I have both A and B elevation dials. I also have the tall turret scope too. The only chart I can find is for the tall turret. Where can I find the right chart for the short turret?
  16. M

    Talk to me about the dreaded case neck "Donut"

    For sure.... also I tried last night to size with the expander ball then expander mandrel.. and the donuts still were there. Just ordered a reamer.
  17. M

    Talk to me about the dreaded case neck "Donut"

    2aBaCa when you use different size bushings.... do you see a improvement in accuracy?
  18. M

    Talk to me about the dreaded case neck "Donut"

    get this.... 12 cases sized and one out of the 12 does not have a donut. cheap way out? Forster special order reamer.... two week wait. Ebay reamer, if you can find the diameter you need, I did, delivered in less than a week. Redding says it's better to use a reaming die. Can find some on ebay.
  19. M

    Whidden dies

    don't own a 6.5
  20. M

    Whidden dies

    I push hard.... they would have gotton it right
Top Bottom
Back
Home
Forums
Merch
Alerts