Search results

This is exactly what I do

Thanks everyone I love this rifle I find that I have put my AR's aside when I go to the range this rifle always comes with me. It shoots FGMM 69 grain, Vmax 40 reloads, and even my plinking 55 reloads very well. Sent from my Nexus 4 using Tapatalk 2

About a year ago I had Russell @ SSC build me a 223 bolt action but I wasn't able to write up a report on it since I was overseas due to my job. A week ago I started working up a load for it with some Nosler 2nds I picked up and some RL15. I also made up a sighter load to get me on target...

Rem 700 Brux 20" 1/8 223 wylde chamber 77gr Nosler Custom competition 2nds seated to 2.260 RL15 22.5g, 2502 fps 23.0g, 2561 fps 23.5g, 2635 fps LC brass Tula SRM sighter shots only top left target on 1st target page 77gr Nosler Custom competition 2nds seated to 2.350 H335 22.2g, 2589 fps LC...

measure from the ogive with Hornady comparator not the meplat because as you have seen you will have variances, I used a Challenger today to load some 69 and 168 smk's and the were all within .001-.002 of each other using the Hornady comparator. Is your load a compressed load? If it is you...

Isopropyl alcohol vapor is denser than air and is flammable with a combustible range between 2 and 12.7% in air. It should be kept away from heat and open flame. Isopropyl alcohol has also been reported to form peroxides, which may explode upon concentration

buy a new one for $10 save yourself the grief

Are you reloading for an AR or bolt gun? I just loaded some 123 SST's to 2.260" so they fit in a magazine, i don't have my load book with me at the moment so I cant tell you what the measurement with the comparator is. I was under the impression that you can't load long enough to touch the...

You can use the 123g SST, beggars can't be choosers.:) Super Shock Tip (SST) Bullets .264 Diameter 123 Grain $29.51

I use their small rifle, large rifle, small pistol, and large pistol so far I've only had an issue with 2 small pistol primers not igniting out of over 500.

With Varget compression and crimps are your friend as you get into the higher charge weights.

I just keep my powders in a closet in my house, I would never store powder in an ammo can or other strongly constructed object due to the gasses not be able to vent if the powder happens to catch fire possibly causing an explosion...has it happened i don't know but i don't take chances. here...

Midwayusa's computer will automatically put items on clearance if they don't sell any for a certain time frame, it will continue to lower the price automatically until some purchases the item.

I found this online but haven't tried any of the loads

you can ship via USPS to FFL's

I use 19.8 grains of IMR4198 with a 55 grain FMJ loaded to mid cannelure out of my AR15 with a 1/9 twist it delivers good accuracy...usually 1" or less at 100 yds. IMR4198 is usually used with lighter bullets in .223 caliber

That thing looks like it weighs a ton

I use Accurate #2 for .380acp, 9mm, 40s&w, 38 spec, and .45acp

They only powder and primers I have in my pics are the 4 or 5 I was actually using, my powders and primers are stored in the house, you'd probably shit a brick if you saw my powder and primer stores.:) Sent from my Nexus 4 using Tapatalk 2

I'll be the odd man out. I use 5.4g of Accurate #2 with my 230g RN lead OAL 1.230 cci primers I also use the same load for my 230g plated FP, OAL 1.230 cci primers in my 1911