• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

barrel

  1. U

    BCM non blem uppers questions.

    I’ve bought 3 BCM non blem uppers in the past and all 3 of the uppers allowed my barrel to slid in (it was pretty tight) about 1/2 or 1/4th of the way in then stopping and having to be thermal fitted to get it to seat the rest of the way, is this okay? I read somewhere it could be tapered if...
  2. U

    Correct split point drill bit angle for cupped or knurled set screws that are 10/32 x 3/16? 118 degree angle vs 135 degree angle? Or something else?

    I was under the impression that 135 degree angled split point drill bits were better for metal such as steel, but some people say 118 degree split point drill bits are better for cupped or knurled set screws and some say 135 are better. if anyone can give me some solid information on this it...
  3. USMC-03XX

    Mk 12 build advice

    So to start off I’m not planning on ever running this suppressed. I have no preference of 18” or 16”, was leaning towards 16” because I like the balance. And prefer short. But if there’s legit reasons to go rifle length gas and 18” over mid 16” please educate me. Barrel is coming from centurion...
  4. K

    Firearms LMT PARTS

    All parts are new. BCG SOLD. LMT 14.5 Midlength barrel. $325 shipped LMT Carrier with Enhanced Bolt. $375
  5. B

    Advice on a custom 16" AR 10 barrel

    Hello all, I'm planning on putting together a somewhat lightweight AR-10 build. I've settled on a 16" barrel length, as I'll never take this thing past 800 yards (probably never past 400, unless I get access to a better range) and I always run a can. I am an accuracy snob, so I want something...
  6. Benfield_Precision

    Accessories .338 CarbonSix Barrel 1.120" diameter Tikka/Ruger American

    Purchased to put a .338 Win Mag on a Tikka. Chamber diameter - 1.120" muzzle - .900" length - 24" Twist - 1:10 Extended chamber - 3.00" Extended Muzzle - 1.5" Barrel would cost $645.00 plus shipping form CarbonSix $600.00 shipped to your door. If you want it threaded for a Tikka I can do...
  7. vegashelipilot

    SOLD White Oak 16" SPR barrel NIB

    For Sale: White Oak Armament 16" SPR Barrel .223 Wylde 1-7 twist midlength gas Brand New, Never Used $225 shipped Paypal f/f
  8. Stofel1934

    SOLD Barrett MRAD 6.5 barrel kit

    I would like to trade my 6.5 CM MRAD barrel kit for a 300 Norma barrel kit. Less than 20 rounds on this unit. If you would like to buy the kit outright $1350 gets it plus shipping.
  9. 6.5guys2

    Firearms WTB 22 creedmoor barrel for defiance tenacity action

    Just as title says I’m looking for a 22 creedmoor barrel prefer carbon fiber for coyote hunting needs to fit a defiance tenacity action I think a ruckus works Aswell you can contact me at (931) 310-132five thinks in advance
  10. The4GunGuy

    SOLD Vudoo V22 Gen 2 Barreled Action For Sale

    THIS HAS BEEN SOLD Have used for one PRS season. EXCELLENT condition and I take very good care of my equipment. Kukri 20" barrel 2 Mags (1-10rnd, 1-12rnd) 2 Speed loaders Upgraded bolt knob Threaded end with protector No trigger (as comes from Vudoo) Can give you tested Center-x lot number...
  11. H

    White Oak barrels vs Faxon MATCH & Criterion

    I've currently got a Faxon match barrel and it's not shooting as good as I'd hope it would - around 1.2-1.8 MOA with IMI 77gr OTMs. 1.9-3.0 MOA with M193. I'm going to play around with a couple more bullet weights but I'm unsure it'll improve drastically. I'm trying not to fall into my habit of...
  12. O

    SOLD 6.5CM Criterion Barrel 26" MTU

    Criterion Barrel-Savage Prefit (Uses Barrel Nut) 26" MTU Contour, Muzzle threaded 5/8-24, 6.5 Creedmoor Barrel is used, round count is 1009. Nothing wrong with it. Been shooting a different rifle so it has just been sitting on the shelf. Comes with Northland Shooters Supply Barrel Nut. SOLD
  13. W

    Trying to get barrel measurements for an older Ruger

    Hey y’all, I’ve got a question regarding an older Ruger M77 mkii, if I remember correctly the rifle is a 1995 model. Before anyone needs to tell me to ditch the old Ruger and buy something else, I know exactly what this rifle is, I’m not trying to to get 1/2” groups or anything, but there’s a...
  14. F

    West VA Douglas Barrels

    Does anyone have experience with barrels from Douglas Barrels Inc from West Virginia? Curious how they compare against Bartlein, Proof, Hawk Hill, etc. Will be in need of a new 6.5CM barrel this time next year. https://www.douglasbarrels.net/
  15. Screach

    SOLD Q Fix 6.5 cm barrel 22”+

    Hey all, I’m looking for a 6.5cm barrel 22” or longer for the Q fix. Low round count or virgin barrel preferred. I have cash. Proof Research Cabon Fiber preferred, however steel is also fine. Thanks all. No longer searching. Thank you.
  16. Kms33kms

    6.5 prc strings. How much is too much?

    I have a 6.5 prc bergara hmr pro , it doesn’t have the thickest barrel , it’s kind of in between a hunting contour and comp contour. I only took 3 shot groups for the first 30-40 round and then I shot a couple of boxes while doing 10 shot groups. Is this too much for my barrel? What is the...
  17. jeffr

    Accessories WTS 26" 6.5CM Proof Barrel for Terminus Zeus QG Prefit

    Selling new: Proof Research Bolt 6.5CM, 26", 1:8, 5/8x24 Thread SS Competition for Terminus Zeus Quick Change Drop in Prefit $400 Can be shipped Can meet near or surrounding ATX cities.
  18. Near miss

    Problems reloading precision ammo with Hornady 75gr BTHP

    I have tried to get the Hornady 75gr BTHP to play along with my MR223 but all my efforts have been futile. So far my attempts have consisted of Materials: 2 cases, Sako and Geco. 3 primers, 450, 400 and Ginex Only N540 powder, I have settled to that and have it stacked. Reloading changes...
  19. Big CHIEF

    Accessories WTS Proof Carbon Barrel - 6.5mm Blank

    For sale New Proof carbon barrel. Cal: 264, shank: 1.20", Finish length: 20", Twist 7.5, Contour: Sendero light. This is brand new still in package. $620 TYD lower 48.
  20. Dr. Davy Jones

    Accessories found

    Hi guys, I’m looking for a 20” or less 6.5 creedmoor barrel in savage small shank. Anybody got one they don’t need? Thanks!