data

Ok, reloading manuals and the interweb are scarce on information for Reloader 10X powder. Anyone w/ the latest greatest reloading manuals have any load data for RL10x .223 in 55gr FMJ, 60gr & 62gr projos? Thanks.

I'm sure that there is some info here somewhere, but I need some help. I'm looking for some load data for 100 grain bullets and N560 powder. I'm using fire formed fereral brass and 210M primers. I shot a load this morning of 49 grains of Varget. Lets just say it was to hot, way to hot. I'm...

Does any on have a good load? I have only been able to get with an 180gr and 200gr 2900 to 3089 max before I start getting over pressure sings. I don’t wont to go with a lighter bullet my barrel is a 1-10 28" I would have stayed with a 300wby or a 300 win mag if that is all I can get out of it.

I tried the Search but had no joy. A friend has asked me to help him learn reloading and the only caliber he has is 6mm Remington (Ruger 77). He wants to load 105 A Max at around 3,000 fps. Does anyone have a favorite load for this caliber and or bullet? Thanks!

any one have any load worked up for M61 projo's using IMR 4895 ?? I have weighed a few and they range from 150-153 grains. just wondering if any of you have had any good luck

Does anyone know where I might locate ballistics data on Black Hills Gold 168gr A-max .308 Win Match ammo? With a 200 yd zero, what drop can I expect at say 450yds? This is through a 20" barrel. Steve

Anyone got any good data for this set up? H335, Hornady 68 grain BTHP. I'll be shooting them out of my 24" sabre upper. My Hornady book is always on the low side, but I know I cant make the loads near as hot as I do for my bolt gun. Thanks in advance.

Hey guys looking for some info I’m looking for the BC for the following ammo and muzzle velocity for Mk262 M855 M193 For use in my SPR I know to use a chronograph but I don’t have access to one and I’m trying to get the info required to develop my data book thanks for your help V/R...

We are finally officially opened for business and ready to take your orders. Drop on buy the website and create yourself an account and you are ready to start building yourself a custom data book. For anyone that doesn’t want to create there own data book we offer a premade book as well...

I am currently running 47.0 gr of re-15 in lapua brass(sized with a collet die) 155 vld bergers load 2.890 coal with br2 primers. I get a little ejector wipe every 6-7 rounds around 85 degrees. It gets hot here in the summer so I don't know if that will cause more serious problems or not. I...

I am working up a load for a 700p in 300RUM does anyone have a good load for 175SMK or 180 balistic tip I have IMR 4831 but I am sending him powder hunting and don't want to have to try a bunch of different powders

Does lapua put their info in any manufacturer books? It would be nice if lapua made a reloading manual.

To all the NFA owners here: Please hit up www.nfatracker.com, get an anonymous account, and enter your transfer info if you have it recorded somewhere. This has potential to be a huge resource for the NFA community. He's adding functions but it already provides a lot of good data analysis under...

Has anyone here loaded for this caliber yet? Done lots of looking on other sites, but not too helpful. I was wondering if there is any data out there for rifle powders? All I have found is mainly pistol powder loads. Any input will be appreciated. Thanks in advance! Justin

I just got an email from Hornady with some new published data for the 308 Win with the 208 A-max. Here is what Hornady listed: 308 Win- 208 Amax, WLR primer, Hornady brass, Win M70 22", 2.80", 1:12" twist Varget- Start load: 34.9 @ 2100 fps Max load: 40.0 @ 2300 fps IMR 4064 Start load: 36.2...

Savage Mark II JTV 20" barrel 2 ft from chrony Federal 550 VALUE pack (Wal-Mart) MIN: 1241 MAX: 1289 DEV: 13.86642628 SPRD: 48 AVG: 1268.555556 Federal Target Grade Performance 325 pack (Wal-Mart) MIN: 1194 MAX: 1258 DEV: 17.02416583 SPRD: 64 AVG: 1231.6 Wolf Match Extra MIN...

Hey guys I am having Centurion Arms build me a mk12 mod 1 upper. I was wondering what you guys recommend for starting to build loads. Looking for a load for 600 or so. Figure I will probably just get winchester brass but would like a combination to start working off. Does anyone have the...

Preferably Varget. Any help would be appreciated as I do not have a Hornady reloading manual. These will be fireforming loads for a 223 AI, 1 in 7.5 twist, 22 inch barrel. Thanks Eddie

I have some Accurate 2200 Data Powder I bought back when it was available for loading 5.56. Now that .308 powders seem to be in short supply I was thinking about trying some 2200 for .308 loads. Mainly be for blasting ammo in a gas gun running 145 FMJs. Just wondering if anyone has tried the...

24" gap 1:8 twist for 123 Lapua scenar Really looking for a Varget load