Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I'm beginning to work on load development for a 300 wsm Using Hornady Headspace Comparator UNFIRED brass headspace measurement: 2.260 Fired Brass (once fired) measurement: 2.283 Question 1: Is 23 thousands expansion normal? Seems like a lot. Question 2: This is a belted magnum, am I...
I’m having trouble with my set of Hornady match dies. The only way to get -.002 on a fire case is to have the die so far down that it’s chipping the teeth on the Hornady lock and load bushing. I’m running a .290 neck bushing with .002 neck tension with once fired Hornady brass. Any ideas? Thanks
How would full-length sizing a case increase the headspace measurement on a .223 case, and charging/seating/crimping decrease the headspace measurement?? This weekend, I started taking headspace measurements on some 223 cases in my stockpile in various states on the way to being reloaded, in...
I was speaking with Krieger barrels and they said that if the bolt is chromed, there MAY be insufficient headspace with the barrel. The reasoning being that if the bolt is made to milspec, and then chromed, the chrome will eat some headspace. I have a Young Mfg National Match Chrome Bolt...
I have shot bolt rifles for years and know this for all bolt rifles , what do I have to get or buy to beasure headspace and oal for the m1A. or is it worth it on a semi auto . Feel free to laugh I feel rather dumb asking but this is where I have gotten a lot of answers and learned a lot. Thanks Bill
Is the extra room in the chamber in front of or in back of the cartridge? In other words does the spring loaded <span style="color: #FF0000">ejecter</span> keep the brass pushed as far forward as it will go <span style="color: #000099">OR</span> does the <span style="color...
My friend just picked up a M44. His fired brass measure around .055 longer than the loaded milsurp shit he bought for it. Is this excessive? Does anyone have a SAMMI reamer print for 7.62x54R? Thanks guys....
So I found a bolt for my project rifle and borrowed some headspace gauges and they worked properly. Bolt closed on the go gauge and did not on the no-go. So everything was kosher and I shot the rifle with a shoestring. It seemed to work fine. I checked it today while reloading at another...
I bought a box of reloading dies/components at a yard sale recently.. (gentleman passed away and his wife was selling it) Lot's of nice dies in it..... There was a set of what appear to be gauges for belted mag cartridges. There is no markings on them however, would anyone with belted mag...