Firearms 18” 6.5 prc Tikka

NateAdams13

Supporter
Supporter
Full Member
Minuteman
  • Apr 7, 2021
    518
    97
    Scottsbluff, Nebraska 69361
    Considering letting this one go.

    Began life as a tikka veil. Barrel was cut to 18” by class 3 machine and threaded 5/8-24. OMR fluted bolt shroud, Lumley carbon bolt knob. JA outdoors bottom metal in matching bronze cerakote. Stockys vertical grip carbon stock (26-27 ounces). Has two gunsmith adapters for spartan tripods/bipods. Rear one is a touch off center but works fine for the tripod use. UM 30mm rings and level, UM recoil lug. Very accurate with 140 bergers at 2700 or so. Didn’t quite finish developing a load. Factory mag and one modified HCA mag.

    Have 130ish Peterson 1x brass, 3+ boxes of Berger 140 elite hunters that can go with it. Only powders tried were 4831sc, h1000 and n565.

    Would like 2100 for everything (no optic) or 3400 with the trijicon tenmile 3-18. Don’t want to sell the optic unless the rifle goes first.

    Can add a Spartan pro hunt tac (long) bipod for additional.

    Feel free to pm offers or trades.

    Trades include 6 creedmoor (21” and under), 25 creedmoor (22” and under). Possibly a 20” 6.5 prc. Will consider others. Barreled actions will be considered as well.
     

    Attachments

    • IMG_2029.jpeg
      IMG_2029.jpeg
      3.6 MB · Views: 71
    • IMG_2030.jpeg
      IMG_2030.jpeg
      3.1 MB · Views: 72
    • IMG_2031.jpeg
      IMG_2031.jpeg
      2.4 MB · Views: 59
    • IMG_2032.jpeg
      IMG_2032.jpeg
      3.7 MB · Views: 59
    • IMG_2037.jpeg
      IMG_2037.jpeg
      1.5 MB · Views: 73
    Last edited:
    • Like
    Reactions: Dendro