2 Beanland Builds Just Got Done

JCH

JCH

Gunny Sergeant
Full Member
Minuteman
Jun 10, 2008
2,765
117
Oklahoma City, OK
#1
I just picked up my two builds from Beanland today. Jon builds a helluva rifle!! I'm super excited to get these things out to the range.

Here's the rifles:
Surgeon WSM 591 in 7mm Rem SAUM, Obermeyer twisted w/Kampfeld brake
Manners T5A with Mini Chassis
Vortex Razor
Beanlandbuilds001.jpg

The bolt is NP3 coated
Beanlandbuilds004.jpg


The long range coyote slayer:
Stiller Predator in 243AI, Rock 8 twist
McMillan A5 with Surgeon DBM
SS 5-20
Beanlandbuilds011-1.jpg


Beanlandbuilds008.jpg


Beanlandbuilds009.jpg


Beanlandbuilds010.jpg
 
#5
Re: 2 Beanland Builds Just Got Done

Damn i am jealous. You have 2 sweet looking builds and have fun wageing war on those coyotes with the 243AI. It is a great round.
 
#6
Re: 2 Beanland Builds Just Got Done

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Dan Tucker</div><div class="ubbcode-body">Damn i am jealous. You have 2 sweet looking builds and have fun wageing war on those coyotes with the 243AI. It is a great round.</div></div>

It is the 4th one I have had over the years.

I'm ready to bang some steel.
 
#7
Re: 2 Beanland Builds Just Got Done

Nice! Because of this forum and a couple reputable smiths I am having a 7-08 hunting rig built by Beanland and soon will be shipping him the components for a 243AI in a Mickey A3. He's been nothing but great to work with over the phone thus far.

Have fun with your new rigs....they look great!
 
#8
Re: 2 Beanland Builds Just Got Done

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JCH</div><div class="ubbcode-body">I'm ready to bang some steel. </div></div>

Sweet looking rifles! When you get a load worked up, give me a shout and you can come wring those out. My 284 in the xlr chassis should be finished in a couple weeks.
 
#11
Re: 2 Beanland Builds Just Got Done

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KPK</div><div class="ubbcode-body">Very nice Jason! What's the barrel length on the 7?</div></div>

24", expecting to get around 3100 with the 162amax
 
#12
Re: 2 Beanland Builds Just Got Done

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JCH</div><div class="ubbcode-body">Surgeon WSM 591 in 7mm Rem SAUM, Obermeyer twisted w/Kampfeld brake
Manners T5A with Mini Chassis
Vortex Razor
The bolt is NP3 coated </div></div>

Looks good, thanks for posing the pictures! What is the magazine and bottom metal setup on the 7mm? It looks like it might be an AICS mag with modifications? Could you post some pictures of the magazine and mag well? Was the receiver notched out? How does it feed? Thanks!
 
#13
Re: 2 Beanland Builds Just Got Done

the bottom metal on the 7mm is the Manners Mini Chassis. The mag is the AICS mag that came when I purchased some Surgeon DBM. The receiver is not notched out, Surgeon doesn't recommend that process on their actions.

I haven't ran any ammo through the mag/rifle yet. I will let you know when I do.
 
#14
Re: 2 Beanland Builds Just Got Done

Are you talking about a vld notch? My rsr wsm action has the vld notch from the factory.

Get you an alpha mag, squeeze out all the oal you can!
 
#15
Re: 2 Beanland Builds Just Got Done

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pyplynr</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JCH</div><div class="ubbcode-body">I'm ready to bang some steel. </div></div>

Sweet looking rifles! When you get a load worked up, give me a shout and you can come wring those out. My 284 in the xlr chassis should be finished in a couple weeks. </div></div>

I will for sure. We will have to do it early....too dang hot to try an evening or middle of the day shoot.
 
#17
Re: 2 Beanland Builds Just Got Done

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: coythtr</div><div class="ubbcode-body">When it cools off bring that 243 out and we will wack some yotes.</div></div>

Will do. I figured you would like the stainless look!
 
#19
Re: 2 Beanland Builds Just Got Done

Nice looking rifles. I just bought a Beanland 260 off a member and I'm sending the barrel out to be nitrided tomorrow. I'm anxious to get it out.

Do you know how backed up Jon is at this time? What was your turnaround on these?

Thanks
 
#20
Re: 2 Beanland Builds Just Got Done

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Goin'Hot</div><div class="ubbcode-body">Nice looking rifles. I just bought a Beanland 260 off a member and I'm sending the barrel out to be nitrided tomorrow. I'm anxious to get it out.

Do you know how backed up Jon is at this time? What was your turnaround on these?

Thanks</div></div>

4-6 weeks at the moment was what I was told. These were around 6 weeks.
 
#22
Re: 2 Beanland Builds Just Got Done

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JCH</div><div class="ubbcode-body">
Beanlandbuilds004.jpg

</div></div>

In this picture it looks like there is a slot milled in the side of the magazine? That is why I was asking if the magazine is modified, because AICS doesn't make a WSM magazine, right? Was the cutout because WSM shoulder is longer than the 308 and the cut removes the rib that was meant for 308? Does the magazine still have the spacer plate in the front part to limit COL? Thanks!
 
#26
Re: 2 Beanland Builds Just Got Done

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: McFred</div><div class="ubbcode-body">
In this picture it looks like there is a slot milled in the side of the magazine? That is why I was asking if the magazine is modified, because AICS doesn't make a WSM magazine, right? Was the cutout because WSM shoulder is longer than the 308 and the cut removes the rib that was meant for 308? Does the magazine still have the spacer plate in the front part to limit COL? Thanks!</div></div>

241f94c2.jpg


e0b2e7ac.jpg
 
You must log in or register to reply here.

Similar threads

FourT6and2
New Beanland Rifle with Lone Peak Arms Fuzion
Replies
4
Views
640
FourT6and2
FourT6and2
Matt_3479
Tl3 hunting and trainer build!
Replies
11
Views
556
King_beardsly
King_beardsly
Nameless
One and done custom gun to replace old Rem700 SPS-V 308
Replies
19
Views
1K
Greg Langelius *
Greg Langelius *
Glassaholic
SOLD SOLD - SJA Bartlein Bighorn Manners 7mm SAUM Crossover Rifle with Ammo!
Replies
10
Views
2K
Glassaholic
Glassaholic
K_4c
Beanland build has touched down
Replies
29
Views
3K
dragbag
D
Top Bottom
Back
Home
Forums
Merch
Alerts